Wynthorpe Posted October 11, 2014 Report Share Posted October 11, 2014 Kinda surprised that's news, AS Global have had these up for literally months, I'd have posted up if I'd known. Good WGC have them though, I was thinking of replacing my non-traded 17 and the extended mag catch on the Gen4 make it very appealing. No idea at all these were coming. Quote Link to post Share on other sites
NonEx Posted October 11, 2014 Report Share Posted October 11, 2014 (edited) Damn why did you have to post that LoL. Wonder if the spring guide would work on gen 3? No. Cut-out hole in front of slide is bigger on GEN4. CKinnely is right; http://www.airsoftglobal.com/shop/index.php?main_page=product_info&cPath=51_391&products_id=19845 Added August 20th. Don't get your comment though, if you knew you would have posted, but you would have posted if you'd known ? (it was news?) Of course it's news! Edited October 11, 2014 by NonEx Quote Link to post Share on other sites
Burner1352 Posted October 11, 2014 Report Share Posted October 11, 2014 Damn. Oh well my wife will hate me then when I buy it lol Quote Link to post Share on other sites
NonEx Posted October 11, 2014 Report Share Posted October 11, 2014 (edited) Also the cut-out in the front of the frame is larger to accomodate the larger spring assembly as well. The Asia only comment was on WGCs site for the PPQ Asia Edition as well but those were shipped all over. They are just trying to cover their asses because of the trademarks. If they won't ship KIC Taiwan most likely will. And whomever else might have it. Edited October 11, 2014 by NonEx Quote Link to post Share on other sites
TheFull9 Posted October 11, 2014 Report Share Posted October 11, 2014 Of course it's news! I do not know the stuff that everyone else has in their own heads, I cannot read minds. I also don't check every single review/news/discussion thread religiously where the information could potentially have been put up (there's a lot of places). I presumed people had seen them, if I'd known they hadn't, I would've mentioned it. If I'd mentioned it and everyone already knew, I'd get snide 'pff.. boring *snooze*' type replies. Quote Link to post Share on other sites
NonEx Posted October 11, 2014 Report Share Posted October 11, 2014 Say what now? Quote Link to post Share on other sites
uscmCorps Posted October 11, 2014 Report Share Posted October 11, 2014 I wonder if the mag release is reversible? My friend has limited use of his right arm and has a RS Gen 4 with the mag release switched to the right. If I can give him the same thing but for airsoft, he'd be well pleased. Quote Link to post Share on other sites
TheFull9 Posted October 12, 2014 Report Share Posted October 12, 2014 Pretty certain they're reversible on all the different Gen3 models and the cut-out in the frame looks to be the same size on the right as it is on the left. Should be g2g. Quote Link to post Share on other sites
uscmCorps Posted October 12, 2014 Report Share Posted October 12, 2014 On all the Gen 3 Stark Arms magazines I have, they only have the mag catch cut out on the right side making it only work for a left side mag release. These new Gen 4 Glock mags appear to have both left and right side cut outs so I'm guessing they're a new mag and *hopefully* truly ambi. 1 Quote Link to post Share on other sites
icolater Posted October 12, 2014 Report Share Posted October 12, 2014 Can't wait. I asked them on Facebook to make these about a year ago. Hope they make a olive green and tan version as well as a g19 gen 4. The build quality on VFC/stark pistols have improved with every offering so I am expecting GLOCK PERFECTION this time around. Quote Link to post Share on other sites
Wynthorpe Posted October 13, 2014 Report Share Posted October 13, 2014 Im also still wondering if we will be able to buy it not being from Asia lol. Quote Link to post Share on other sites
matrigs Posted October 13, 2014 Report Share Posted October 13, 2014 (edited) On all the Gen 3 Stark Arms magazines I have, they only have the mag catch cut out on the right side making it only work for a left side mag release. These new Gen 4 Glock mags appear to have both left and right side cut outs so I'm guessing they're a new mag and *hopefully* truly ambi. Good eye you have there. Idd it seems these mags might be ambidextrous. One thing that bothers me just a bit - the images are a bit too small to say exactly, but it seems that this G17 doesn't full auto as the G19 has, which is a pity. I wonder of they fear that the G19 wouldn't be compelling anymore. EDIT: In the end i decided that i will give Stark another chance, and i'm ordering another G19. I sincerely hope that first one was just an unexpected dud. Edited October 13, 2014 by matrigs Quote Link to post Share on other sites
jammie654 Posted November 8, 2014 Report Share Posted November 8, 2014 Im tempted to order another SA as a back up for my SAI glock, Or just so i can run two pistols when i can't be bothered with my full load out Quote Link to post Share on other sites
Finbarqs Posted December 2, 2014 Report Share Posted December 2, 2014 Any guides as to permanently make the G19 semi only??? Quote Link to post Share on other sites
Wynthorpe Posted December 5, 2014 Report Share Posted December 5, 2014 Any guides as to permanently make the G19 semi only??? Epoxy the switch so it wont move, that's what i did. Quote Link to post Share on other sites
johny_blaze Posted December 7, 2014 Report Share Posted December 7, 2014 Mine's quite stiff and doesn't move yet sometimes when I try to fire off a few rapid shot it goes in full auto. Quote Link to post Share on other sites
Probotector Posted December 11, 2014 Report Share Posted December 11, 2014 (edited) Interested into buying one. Are there any aftermarket parts available for the G19? Looking for a threaded barrel. Edited December 11, 2014 by Probotector Quote Link to post Share on other sites
matrigs Posted December 11, 2014 Report Share Posted December 11, 2014 Interested into buying one. Are there any aftermarket parts available for the G19? Looking for a threaded barrel. WGCShop has so many parts that you could basically build a g19 from scratch. And they are pretty cheap, too. Quote Link to post Share on other sites
Probotector Posted December 13, 2014 Report Share Posted December 13, 2014 (edited) Yeah but do they fit? I've read that TM barrels do not on the Stark Arms. Edited December 13, 2014 by Probotector Quote Link to post Share on other sites
mezurashii Posted December 13, 2014 Report Share Posted December 13, 2014 Interested into buying one. Are there any aftermarket parts available for the G19? Looking for a threaded barrel. There aren't any currently available, however you can easily make one. I bought an extra barrel from WGCShop and mounted it in a lathe, drilled out the end of the barrel, and threaded it to take the same adapter that WE pistols use. It works quite nicely. You will have to buy the extended adapter though as the normal sized one is to short and the gun cant cycle with it because the suppressor will hit the frame. Quote Link to post Share on other sites
NonEx Posted December 13, 2014 Report Share Posted December 13, 2014 Yeah that sounds real easy Quote Link to post Share on other sites
mezurashii Posted December 13, 2014 Report Share Posted December 13, 2014 (edited) Yeah that sounds real easy If you have a metal lathe than yeah its extremely easy, it took me less than 10 minutes. If you don't have a metal lathe than you would have a much harder time doing it, but if you took it to a machine shop I'm sure they would do it for you. Edited December 13, 2014 by mezurashii Quote Link to post Share on other sites
NonEx Posted December 15, 2014 Report Share Posted December 15, 2014 Well looks like I got trolled pretty hard by Customs on my steel Stark Glock 19. Just found out it was returned to sender back in October, without any notice to me. I was told verbally it would be let go and delivered to me. I also paid the import duties for it, haha. I knew I was never going to see it. *fruitcage* this shiz! Quote Link to post Share on other sites
icolater Posted December 15, 2014 Report Share Posted December 15, 2014 Sorry to hear that nonex. That's does indeed suck balls. Quote Link to post Share on other sites
Dj_komodo Posted December 15, 2014 Report Share Posted December 15, 2014 I feel you bro And the sender did not contact you? You should at least get the amount of the pistol back. That's a very shady thing to do... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.