wolfgeorge Posted December 22, 2015 Report Share Posted December 22, 2015 How good are they?? I might pick up one.. Wolf Quote Link to post Share on other sites
Alias1983 Posted December 22, 2015 Report Share Posted December 22, 2015 Brainexploder has one, I dont like the ergonomics. Quote Link to post Share on other sites
wolfgeorge Posted March 12, 2016 Report Share Posted March 12, 2016 This is one of my WA2000..Wolf Quote Link to post Share on other sites
wolfgeorge Posted March 13, 2016 Report Share Posted March 13, 2016 The rest.. 2x Ares WA2000 2x Asahi WA2000 The Geneth is in pieces cause I'm working on it... Wolf Quote Link to post Share on other sites
ED-SKaR Posted March 13, 2016 Report Share Posted March 13, 2016 0o0 Can I have one? They're awesome! Quote Link to post Share on other sites
Breathe Posted March 13, 2016 Report Share Posted March 13, 2016 My Asahi Bushmaster. Super high ROF, picky magazines, but oh boy is it fun. Quote Link to post Share on other sites
vorpalbunnie Posted March 22, 2016 Report Share Posted March 22, 2016 Probably my favorite classic gun right now besides my MGC glocks. The rate of fire is superb as is the sound it makes Quote Link to post Share on other sites
wolfgeorge Posted June 8, 2016 Report Share Posted June 8, 2016 Asahi WA2000 Wolf Quote Link to post Share on other sites
renegadecow Posted June 9, 2016 Report Share Posted June 9, 2016 Quote Link to post Share on other sites
Radi Posted July 19, 2016 Report Share Posted July 19, 2016 Here are my two bullpups Top one is a 100% original Marui AUG A1, bottom is a stock CA AUG A1 Quote Link to post Share on other sites
Mike Obrien Posted August 29, 2016 Report Share Posted August 29, 2016 Not sure why but the aug picture thread has been archived So I'll leave these here. Quote Link to post Share on other sites
Deadeye Posted September 1, 2016 Report Share Posted September 1, 2016 renegadecow what is that light or you have on the side of your p90? Quote Link to post Share on other sites
Katotaka Posted September 1, 2016 Report Share Posted September 1, 2016 renegadecow what is that light or you have on the side of your p90? I believe it's a replica of Princetontec Switch Rail light Quote Link to post Share on other sites
wolfgeorge Posted November 14, 2016 Report Share Posted November 14, 2016 The latest addition to the collection.. Ares DSR-1 with 2 CO2 mags.Wolf Quote Link to post Share on other sites
wolfgeorge Posted December 12, 2016 Report Share Posted December 12, 2016 And the pair.. My old and "new" Ares DSR-1's Wolf Quote Link to post Share on other sites
blind_marksman Posted April 9, 2017 Report Share Posted April 9, 2017 Here's my pride and joy. It's undergone a little bit of 'cosmetic surgery' since the last time I posted it online. Take a W.E L85A2 GBBR. Saw off the front end. Acquire a G&G 'AFV' front end. Apply a liberal use of hammers, harsh language and eventually the skills of a well trained professional airsoft-tech and this is the result: It works fairly well, although my next step will be working on the internals to try and improve the performance to get something that's a little less likely to fling rounds off in random directions... Quote Link to post Share on other sites
calbur20 Posted April 9, 2017 Report Share Posted April 9, 2017 That's actually one of the projects I'm planning to work on next. How difficult is the mod? Quote Link to post Share on other sites
blind_marksman Posted April 10, 2017 Report Share Posted April 10, 2017 (edited) I wouldn't say it was overly difficult, the biggest problem was removing excess material from the G&G parts. G&G AFV sub-assemblies required: L85-C-09 (The front, outer barrel, mock gas parts), L85-C-10 (top cover, mock gas parts). L85-C-11 is optional, it's just the flash hider. If ordered direct from G&G, they are supplied fully assembled. L85-C-09-2 is the actual front end. Spare WE L85 #40 and screws #149 (x2) may be useful. Removing the original outer barrel, gas block, #40 etc - not too difficult, just a case of undoing a few screws and it all slides out. C-09-2 slides into the vacant space, but won't stay in place and blocks the safety. However, getting C-09-2 to fix into place was beyond me - I lacked the necessary tools. From memory of what the tech and I discussed, our solution was: The lower edges of C-09-2 needed cutting down (fair amount of work with the dremel), to fit over the WE's Safety. WE #40 needed cutting, all the material above the screw holes needs to be removed. Parts C-09-2 and WE #40 then get fixed together. This then allows the new front end to be screwed into place in the upper TMH. Looking back I see that there are a few things that we could have done differently, but what we did works, and I am more that satisfied with the results. That said, if anyone could recommend any hop-up and inner barrel replacements/improvements I'd be very appreciative of it. Edited April 10, 2017 by blind_marksman Quote Link to post Share on other sites
DarkLite Posted April 11, 2017 Report Share Posted April 11, 2017 I wouldn't say it was overly difficult, the biggest problem was removing excess material from the G&G parts. G&G AFV sub-assemblies required: L85-C-09 (The front, outer barrel, mock gas parts), L85-C-10 (top cover, mock gas parts). L85-C-11 is optional, it's just the flash hider. If ordered direct from G&G, they are supplied fully assembled. L85-C-09-2 is the actual front end. Spare WE L85 #40 and screws #149 (x2) may be useful. Removing the original outer barrel, gas block, #40 etc - not too difficult, just a case of undoing a few screws and it all slides out. C-09-2 slides into the vacant space, but won't stay in place and blocks the safety. However, getting C-09-2 to fix into place was beyond me - I lacked the necessary tools. From memory of what the tech and I discussed, our solution was: The lower edges of C-09-2 needed cutting down (fair amount of work with the dremel), to fit over the WE's Safety. WE #40 needed cutting, all the material above the screw holes needs to be removed. Parts C-09-2 and WE #40 then get fixed together. This then allows the new front end to be screwed into place in the upper TMH. Looking back I see that there are a few things that we could have done differently, but what we did works, and I am more that satisfied with the results. That said, if anyone could recommend any hop-up and inner barrel replacements/improvements I'd be very appreciative of it. Hop-up and barrel wise, I'd recommend a mapleleaf delta or decepticon rubber in 50deg hardness, paired with either a mapleleaf or Angrygun inner barrel. If going for the angrygun barrel make sure it's the old style cut, not the new WE specific cut. Quote Link to post Share on other sites
blind_marksman Posted April 11, 2017 Report Share Posted April 11, 2017 Hop-up and barrel wise, I'd recommend a mapleleaf delta or decepticon rubber in 50deg hardness, paired with either a mapleleaf or Angrygun inner barrel. If going for the angrygun barrel make sure it's the old style cut, not the new WE specific cut. Many thanks, much appreciated! Although I think I might go for one of the harder rubbers, as I'm planning on using 0.28 rounds, and I'm lead to believe that the harder rubbers are better suited to heavier weight ammunition. Quote Link to post Share on other sites
DarkLite Posted April 11, 2017 Report Share Posted April 11, 2017 Nope. Harder rubbers seal better, but softer rubbers grip more. Heavier BBs work better with softer rubbers, but higher air pressure seals better with a harder rubber. In an AEG, which has only a small lip to seal against the nozzle, this can be a major concern. The we/TM gbb rubbers, however, will never experience blowby because of their long, thick sealing section. As a result, using the softer rubbers is fine. Quote Link to post Share on other sites
Dimitri MdP Posted April 11, 2017 Report Share Posted April 11, 2017 Maple Leaf Autobot 70º with Maple Leaf inner barrel. Can't beat that combo. Quote Link to post Share on other sites
CALLAHAN_88 Posted July 5, 2017 Report Share Posted July 5, 2017 (edited) Edited July 5, 2017 by CALLAHAN_88 Quote Link to post Share on other sites
klh31 Posted July 6, 2017 Report Share Posted July 6, 2017 Addition to my collection: a russian VSSK (Co2); Quote Link to post Share on other sites
Dimitri MdP Posted July 6, 2017 Report Share Posted July 6, 2017 OMG OMG OMG OMG!!!!!!!!!! it that antisniper's? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.