FireKnife Posted May 1, 2013 Report Share Posted May 1, 2013 Yes as you may have seen on the Tokyo Marui website they have a teaser trailer for the soon to be shown new kit. From what I can guess it is going to be: M320. Some sort of M870 or similar Remington shotgun. Another Biohazard Beretta. Another TM Python. Well the first one is something different, though I thought this was shown on the HK416 a few months ago. The second, well if it is tri-shot win, frickety win. The third, another one, really TM. It doesn't even have a two tone frame to make it a possible Wesker model. And the last, TM Python, meh. And still no Series 70 in frigging Nickel, rage!!!!! 'FireKnife' Link to post Share on other sites
kenxin Posted May 1, 2013 Report Share Posted May 1, 2013 At least put the teaser pics up my good man! Also, I'm gonna copypasta what I said in the other topic : My guess for the revolver would be another python...there are no other revolvers to my knowledge with a screw there. The samurai edge is probably the jill version announced at that shotting bar - biohazard collaboration a few weeks back. The extractor on that shotgun looks moulded so it shouldn't be shell-ejecting. no comments about the m320, we already saw it fills from the pistol grip. So, their new system that costs 50.000 yen might be a gas shotgun (since I doubt a tri-shot would be that expensive)..... WHERE IS THE GOD DAMNED M&P Link to post Share on other sites
hwagan Posted May 1, 2013 Report Share Posted May 1, 2013 Just a thought on the Biohazard model; There's nothing different on the teaser, it looks exactly the same as the standard models. Maybe TM have put the new M9A1 tech into it? Link to post Share on other sites
kenxin Posted May 1, 2013 Report Share Posted May 1, 2013 Just a thought on the Biohazard model; There's nothing different on the teaser, it looks exactly the same as the standard models. Maybe TM have put the new M9A1 tech into it? It is the A1, too bad it was already announced at the event I mentioned Sauce: http://hyperdouraku.com/event/ea_biohazard2/index.html Take a look, if nothing else it's nice to look at that event. Link to post Share on other sites
Habakure Posted May 1, 2013 Report Share Posted May 1, 2013 Putting the M9A1 mech, in older model M9's would make sense (they do love to recoup costs). I'm registering interest in that shotgun, all depends on all the tat they put on it. Edit:- darn it, too slow, me be. Hhmmm. Link to post Share on other sites
hwagan Posted May 1, 2013 Report Share Posted May 1, 2013 Awwww damn... Well a silver outer barrel is a start at least. Are they custom sights as well or am I seeing things? Link to post Share on other sites
kenxin Posted May 1, 2013 Report Share Posted May 1, 2013 Awwww damn... Well a silver outer barrel is a start at least. Are they custom sights as well or am I seeing things? Standard samurai edge custom sights, yeah. Link to post Share on other sites
FireKnife Posted May 1, 2013 Author Report Share Posted May 1, 2013 Erm, what? A M9A1 Biohazard model? Way to completely miss the point TM. Surely they can work the M9A1 mech into a non-railed body and give us a proper Biohazard Beretta with decocker and adjustable hop or am I asking too much. Of all those, unless the Python has removeable shells, the shotgun is the only one that grabs my interest. Even if it is a gas one or a tri-shot with those shell magazines it would be nice, the Spas-12 is too bulky to me and the M3 just isn't my thing. 'FireKnife' Link to post Share on other sites
Inari Posted May 1, 2013 Report Share Posted May 1, 2013 I'm ashamed to admit that if it's M9A1 in Biohazard body...I'll be all over it! Link to post Share on other sites
seagullman Posted May 1, 2013 Report Share Posted May 1, 2013 gbb shotty... a man can dream right ;D obv prob springer, still cool to see something new thouh Link to post Share on other sites
Wild_XIII Posted May 1, 2013 Report Share Posted May 1, 2013 Sauce: http://hyperdouraku.com/event/ea_biohazard2/index.html The purple plated P226 custom made me projectile vomit disgust at my monitor. Link to post Share on other sites
demoncase Posted May 1, 2013 Report Share Posted May 1, 2013 Nothing here of any major significance, accept the M320- and that's something which is of no interest to me. Also with TM's customary glacial slowness to market, it's hardly lighting anyone's trousers alight. Link to post Share on other sites
starburst Posted May 1, 2013 Report Share Posted May 1, 2013 In comparison to the Franken P226 they released last time at least the A1 Biohazard looks good, even if RE fans will nitpick, when I saw the tease I was hoping for a revamp of the original as it would signal A1 improvements being worked into the older style frames but alas. Where oh where is the M&P as well as the HK45 that they have been supposedly working on for how many years? Link to post Share on other sites
cazboab Posted May 1, 2013 Report Share Posted May 1, 2013 IMO the 870 could stand to have the rail taken off and some dead tree put on in place of the grips. The m320 might be interesting, but I'll hold off buying one till I see it in person at very least, and if its the new system costing as much as a recoil aeg, they can *fruitcage* right off. Link to post Share on other sites
bankz5152 Posted May 1, 2013 Report Share Posted May 1, 2013 Wheres the FN FNP!!! Link to post Share on other sites
Aitch Posted May 1, 2013 Report Share Posted May 1, 2013 Tri-shot llauncher ala their M203s? Link to post Share on other sites
spetsnazdave87 Posted May 1, 2013 Report Share Posted May 1, 2013 Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Link to post Share on other sites
Wild_XIII Posted May 1, 2013 Report Share Posted May 1, 2013 Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a tri shot m870. Please be a gas tri shot M870. Please be a gas tri shot M870. Please be a gas tri shot M870. Please be a gas tri shot M870. Please be a gas tri shot M870. Link to post Share on other sites
hwagan Posted May 1, 2013 Report Share Posted May 1, 2013 Tri-shot llauncher ala their M203s? Nah, it's something that involves gas in the pistol grip - There was a bit of video of it somewhere when the HK416 came out. Link to post Share on other sites
cazboab Posted May 1, 2013 Report Share Posted May 1, 2013 Tri-shot llauncher ala their M203s?if you mean the m320, then no, for one thing there's no pump on a 320, for another there's a video on hyperdoraku of it being gassed up in the grip... Link to post Share on other sites
Wingmann Posted May 1, 2013 Report Share Posted May 1, 2013 The shotgun looks interesting. I'm after a reliable one if it's tri-shot. Link to post Share on other sites
renegadecow Posted May 1, 2013 Report Share Posted May 1, 2013 Here's to hoping that revolver is an Anaconda and not just a rehashed Python. Could also be a Colt Trooper for all we know. Link to post Share on other sites
cazboab Posted May 1, 2013 Report Share Posted May 1, 2013 If its a trooper the frame screw is in the wrong place, anaconda would fit, or it could just be a python with target grips or something. Link to post Share on other sites
Brigg Posted May 1, 2013 Report Share Posted May 1, 2013 It would be reaalllly nice if that shotgun turned out to be a gas tri-shot using the TM shell mag. I know it will probably just be a springer like the other ones they make, but a man can dream. Link to post Share on other sites
kenxin Posted May 1, 2013 Report Share Posted May 1, 2013 Here's to hoping that revolver is an Anaconda and not just a rehashed Python. Could also be a Colt Trooper for all we know. Both the anaconda and the trooper have the grip screw in a different place. Its a python (marui got that detail right in their pythons, no reason to think they screwed up on a different model). If its a trooper the frame screw is in the wrong place, anaconda would fit, or it could just be a python with target grips or something. The anaconda has the frame screw in the same location as the trooper Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.