onizuka-gto Posted October 13, 2014 Report Share Posted October 13, 2014 I get a consistent 5 BB, giving me 6 shots on one shell, which I actually like, since it mimics a full length real steel tube load. Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 As my AngryGun stock will be here tomorrow (Holy , four day shipping from Ehobby!?), I'm wondering if a real AR15 grip will fit, or if I need to use an AEG, or GBB specific grip. Quote Link to post Share on other sites
onizuka-gto Posted October 13, 2014 Report Share Posted October 13, 2014 As far as that official word, they said it will take ar15/m4 gbb pistol grips and stock. Whether those gbb items are to real steel specs, I can't honestly tell you Quote Link to post Share on other sites
Danke Posted October 13, 2014 Report Share Posted October 13, 2014 As my AngryGun stock will be here tomorrow (Holy ######, four day shipping from Ehobby!?), I'm wondering if a real AR15 grip will fit, or if I need to use an AEG, or GBB specific grip. I took the stock and grip of my WE GBBR and put on RS parts. I put the WE parts onto my Angry Gun kit. So by infernence the RS will bolt right up. 1 Quote Link to post Share on other sites
DeltaZero Posted October 13, 2014 Report Share Posted October 13, 2014 +1 To RS bolting straight on! Quote Link to post Share on other sites
Trap Posted October 13, 2014 Report Share Posted October 13, 2014 As my AngryGun stock will be here tomorrow (Holy ######, four day shipping from Ehobby!?), I'm wondering if a real AR15 grip will fit, or if I need to use an AEG, or GBB specific grip. My hogue grip fit just fine. Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 Awesome. I'm drowning in RS stuff. Wasn't sure if gbbr was to spec. Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 Finished, Finally, I think. Hah.. Quote Link to post Share on other sites
DeltaZero Posted October 13, 2014 Report Share Posted October 13, 2014 Finished, Finally, I think. Hah.. That is beautiful mate! Any chance I can get a close up of that MOE stock you've modded? I've been trying to think of a way to mod mine! Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 That is beautiful mate! Any chance I can get a close up of that MOE stock you've modded? I've been trying to think of a way to mod mine! Sure. All I did was remove the little front locking bit. There is a push-pin hinge. Once that's removed, all you need to do is cut a channel. It alters the original look of the stock, obviously- but it lets you collapse it fully, which makes the gun way more comfortable in my opinion. Quote Link to post Share on other sites
DeltaZero Posted October 13, 2014 Report Share Posted October 13, 2014 So is that a MOE or is it a CTR?? I don't mind loosing the look of the stock to be able to use it! Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 It was a CTR, though I feel like the same cut would work on the MOE Quote Link to post Share on other sites
DeltaZero Posted October 13, 2014 Report Share Posted October 13, 2014 (edited) Yeah it would but it's a lot harder to make the finish nice which is why I've not done it. I've been so hung up on getting a MOE to fit I didn't even think about looking at the spare CTR I have lying around! 5 minutes with a hack saw and a few seconds with a sharp blade I've made a very neat cut which has made it work perfectly exactly as yours. Thanks for the tip bro! Edited October 13, 2014 by DeltaZero Quote Link to post Share on other sites
Jonesy Posted October 13, 2014 Report Share Posted October 13, 2014 You cuts yours much nicer than I bothered. I like it. :-)And happy to help, of course. Quote Link to post Share on other sites
DeltaZero Posted October 13, 2014 Report Share Posted October 13, 2014 Well I was looking at yours and saw you'd made it wider at the front which I didn't think was needed. Learn from others mistakes eh!! to be honest so long as it works who cares!! Thanks again! Quote Link to post Share on other sites
Honzo Posted October 14, 2014 Report Share Posted October 14, 2014 Thanks deltazero! Wow that's a nice shotgun mod. So, after using this breacher for a bit, i dont know what it is but it seems a bit more durable than the full size. Maybe because the full size has a longer pump its more likely to get that half-racked action or jam. However, i have no issues with the full size but that breacher feels very smooth. Quote Link to post Share on other sites
Drifty Posted October 14, 2014 Report Share Posted October 14, 2014 Breacher is awesome, im keeping mine forever Quote Link to post Share on other sites
bradnuts Posted October 14, 2014 Report Share Posted October 14, 2014 SAT ungraded valve is now available! But according to redwolf's description, it is not compatible with the angry gun stock? That is kind of a bummer. Not sure if I should purchase it now...http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_GBB_Valves_Kits_SAT_High_Performance_Output_Valve_for_Tokyo_Marui_M870_Original_Stock_Series.htm Quote Link to post Share on other sites
DeltaZero Posted October 14, 2014 Report Share Posted October 14, 2014 Thanks deltazero! Wow that's a nice shotgun mod. So, after using this breacher for a bit, i dont know what it is but it seems a bit more durable than the full size. Maybe because the full size has a longer pump its more likely to get that half-racked action or jam. However, i have no issues with the full size but that breacher feels very smooth. Don't thank me thank jonesy!! Good news about that SAT valve, I'd be interested in picking one up so I can run the air rig on a lower PSI. Hopefully they do release a version to work with the stock tubes! Quote Link to post Share on other sites
bradnuts Posted October 14, 2014 Report Share Posted October 14, 2014 I decided to just buy the SAT valve anyway and see how it does with my angry gun stock. Worse comes to worst, I can go back to using the stock stock. Quote Link to post Share on other sites
DeltaZero Posted October 14, 2014 Report Share Posted October 14, 2014 Let me know how it goes if you can pal! Quote Link to post Share on other sites
bradnuts Posted October 14, 2014 Report Share Posted October 14, 2014 I sure will! Hopefully it gets here by the weekend and I can install it on Saturday or Sunday. Quote Link to post Share on other sites
onizuka-gto Posted October 14, 2014 Report Share Posted October 14, 2014 I decided to just buy the SAT valve anyway and see how it does with my angry gun stock. Worse comes to worst, I can go back to using the stock stock.Tell us how it goes! I really would like to use my tactical shotgun as a primary and adding an AG pistol stock is just pay of the plan to get it up to fps to make it effective Quote Link to post Share on other sites
arne71 Posted October 21, 2014 Report Share Posted October 21, 2014 I guess some people have been waiting for this: http://shop.ehobbyasia.com/tonic-airsoft-reinforced-gas-tank-for-marui-m870-tactical-shotgun.html#.VEZpWr7D1oQ Quote Link to post Share on other sites
DeltaZero Posted October 21, 2014 Report Share Posted October 21, 2014 Apparently 80 Shots on a full tank.. that's more than the original Marui isn't it? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.