planeman Posted July 13, 2014 Report Share Posted July 13, 2014 (edited) I just got the AngryGun Power Up Silencer and it does not increase the fps (its stays around 380). Any ideas of to get it to work as I have to remove a screw in order to remove the silencer. Edit: Never mind got it to work Edited July 13, 2014 by planeman Quote Link to post Share on other sites
planeman Posted July 14, 2014 Report Share Posted July 14, 2014 Has anyone who has the AngryGun power up silencer have any problems with the part holding the silencer to the flash hider. Mine seems to come loose when firing with or without bb's in single shot. Quote Link to post Share on other sites
Tisane Posted July 19, 2014 Report Share Posted July 19, 2014 I am personally don't think it will happen. This part is too complicated. You were saying? Ready fighter metal inner shell for VFC MP7 2 Quote Link to post Share on other sites
rusTORK Posted July 19, 2014 Report Share Posted July 19, 2014 Hm... it's very interesting. =) Quote Link to post Share on other sites
biMMer25 Posted July 21, 2014 Report Share Posted July 21, 2014 If that metal inner shell will come into reality, i'd pick the MP7 over the HK417 gbb. I'm just awaiting for further progress of the gun before shelling out my hard earned cash. Don't like the WE or New Wave, the KWA/KSC and TM feels like a TOY, so VFC should be way to go if only that upgrade part will come into production. Quote Link to post Share on other sites
L2E Posted July 21, 2014 Report Share Posted July 21, 2014 So it is missing the outer barrel...I guess they will release an inner barrel to mate with the shell... Quote Link to post Share on other sites
Tisane Posted July 21, 2014 Report Share Posted July 21, 2014 Those two rectangular holes towards the front of the frame I'm sure aren't there on the plastic frame so I'd say that's where the new inner barrel/hop assembly will secure. It also has to come as a complete kit because it won't work at all with one or the other. Wonder if it will be a reasonable price like most of VFCs upgrade parts......fingers crossed. 1 Quote Link to post Share on other sites
rusTORK Posted July 21, 2014 Report Share Posted July 21, 2014 So it is missing the outer barrel...I guess they will release an inner barrel to mate with the shell... And how your will attach flash hider? On inner barrel? =) I hope they will make separate outer barrel and gas block. Both parts are impossible to get from real steel for a proper copy. 1 Quote Link to post Share on other sites
L2E Posted July 21, 2014 Report Share Posted July 21, 2014 And how your will attach flash hider? On inner barrel? =) I hope they will make separate outer barrel and gas block. Both parts are impossible to get from real steel for a proper copy. Yep, it will have to be a complete kit... Quote Link to post Share on other sites
Jim01 Posted August 3, 2014 Report Share Posted August 3, 2014 I'm thinking about something a little different for one of these...any silencer adapters available? Need a 14mm, any suggestions? Quote Link to post Share on other sites
BioRage Posted August 26, 2014 Report Share Posted August 26, 2014 Officially joined the club! Got a killer deal second hand from a gun collector, so picked it up without hesitation. Opened it up, cleaned the gunk, and re-lubed it. Haven't taken the shell and what not completely off, but rather not at this point. Kicks like a mule and very satisfied with it. I was bouncing some ideas with @L2E and he stated it may be possible to use the Azimuth reducing valve (MP5/UMP/ETC.) to get the MP7 down to under 350FPS. Does anyone have any other or similar solution? I'd like to make this beast into a CQB weapon. Quote Link to post Share on other sites
rusTORK Posted August 26, 2014 Report Share Posted August 26, 2014 Any news from Ready Fighter? Also i didn't founded their site or facebook account. Can anyone sahre the links? Quote Link to post Share on other sites
christhesecond Posted August 26, 2014 Report Share Posted August 26, 2014 I was under the impression that the stock valve could be shimmed to reduce fps. Is this not the case? Quote Link to post Share on other sites
rusTORK Posted August 26, 2014 Report Share Posted August 26, 2014 (edited) Since nobody share their H&K Defence marking from navy, then i will share marking i got from one good online store. I hope it will help people which don't have marking to finally get it. Just don't use this number. Or we will have two SMG with one number! =))) LOL Edited August 26, 2014 by rusTORK Quote Link to post Share on other sites
L2E Posted August 27, 2014 Report Share Posted August 27, 2014 I was under the impression that the stock valve could be shimmed to reduce fps. Is this not the case? If it is like the other VFC nozzles, then it can be shimmed as well. I haven't taken mine apart yet so I have no idea but VFC seems to be very consistent regarding nozzle internals so I would assume the Azimuth nozzle bulb or shimming would work. Quote Link to post Share on other sites
BioRage Posted August 27, 2014 Report Share Posted August 27, 2014 I'll have to find a way on how to shim the nozzle. Anyone have some pictures? Quote Link to post Share on other sites
christhesecond Posted August 27, 2014 Report Share Posted August 27, 2014 Thanks L2E. Quote Link to post Share on other sites
johnyew Posted January 27, 2015 Report Share Posted January 27, 2015 Hi Guys, Which mag pouch are you using? My current mag pouch, 3 mag setup for MP9, though can fit the MP7, taking it out during a game is very difficult. Any other options available? Quote Link to post Share on other sites
Zereck Posted April 8, 2015 Report Share Posted April 8, 2015 So I just bought the RAL8000 version from Landwarriorairsoft and it didn't come with any side rails even tough it should according to WGC and Ehobby pictures. Did they remove it from the european version? Anyone else bought this version? I also asked LWA but didn't receive a reply yet. As for the gun: - 1:1 size is nice and so is the coloring, the plastic while looks better than the Marui first it has a lot of errors when you look closer. I already knew about the plastic barrel and internal casing so it didn't catch me off guard, tough I hope we eventually get a metal replacement. - the magazine is actually good, no fast cooldown, keeps gas and because it's bigger than the others it holds a bit more gas and bbs - performance wise I wasn't expecting Marui magic but VFC doesn't seem to able to place a hop rubber in straight as the BBs tend to curve right(their M&P9 did the same only to the left) not that I wasn't already prepared with a replacement rubber. - also full auto rate of fire consistency was jumpy due to feeding issues similarly to my 417 gbb(in fact the MP7 managed to break a BB in half and lock while it was still in the mag). Is this a common issue in VFC gbbs? Sure it's a GBB you won't use full-auto you would say but when I play some small games with the club I like to use my Marui MP7 on auto and it is still shoots like a laser and no misfeeds or anything. .Kick on the VFC is nice tough. Quote Link to post Share on other sites
vilerk Posted April 8, 2015 Report Share Posted April 8, 2015 On one of the first batch Umarex VFCs that I worked on, I had to polish the bottom of the bolt carrier heavily to get it to fire smoothly in full auto. Make sure to relube everything as well, preferably with a non-aerosol oil. Quote Link to post Share on other sites
christhesecond Posted April 9, 2015 Report Share Posted April 9, 2015 The hop rubber is *suitcase*. Causes all kinds of misfeeds mate. Mine was fine for a few months then suddenly decided crapped out. Misfeeds every other shot on semi. Quote Link to post Share on other sites
3vi1-D4n Posted April 10, 2015 Report Share Posted April 10, 2015 (edited) LOL @ VFC issues *Grins at my Small rice 7* In regards to jumpy issues with auto, its because the hammer is falling before the bolt has returned to battery. Usually due to bolt bounce. Two solutions: - Increase strength of return spring. This fixed the VFC MP5 inconsistent auto issues - Use an anti-bounce buffer (made by AABB) for VFC M4/416/M27 though dunno about 417. Edited April 10, 2015 by 3vi1-D4n Quote Link to post Share on other sites
emp3ror86 Posted April 10, 2015 Report Share Posted April 10, 2015 Probably a real AR10 buffer would work in a 417. Quote Link to post Share on other sites
3vi1-D4n Posted April 10, 2015 Report Share Posted April 10, 2015 Real buffers would be too heavy. A real ar15 Normal carbine buffer is the same weight as the VFC bolt carrier. Quote Link to post Share on other sites
emp3ror86 Posted April 10, 2015 Report Share Posted April 10, 2015 I got DPMS made standard weight buffer in my VT, it is 80 g. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.