Rob15 Posted March 6, 2015 Report Share Posted March 6, 2015 Considering Inokatsu has slides for the VFC M&P9 that are steel... I should imagine these are steel too... but no CO2 mag /_\ If there is one pistol in desperate need of an aftermarket Co2 magazine it's this one, from the photos I've seen on here the original magazines are a massive design fail, by far the worst I've ever seen pistol magazine wise, hopefully someone will do some better magazines for the sake of people who've already bought an FNX. Link to post Share on other sites
PureSilver Posted March 6, 2015 Report Share Posted March 6, 2015 Another recent news of FNX upgrades: Inokatsu slide set OK, now you have my attention. Link to post Share on other sites
DeltaZero Posted March 7, 2015 Report Share Posted March 7, 2015 Oh good lord I need it! Sent from my iPad using Tapatalk HD Link to post Share on other sites
Im going space Posted March 7, 2015 Report Share Posted March 7, 2015 Update: Ace1 can take the recoil under fast fire, seems to have 2 very good brightness settings, on and off. Can't tighten it all the way on otherwise pressure on the battery cuts the sight out. Meh/10 Link to post Share on other sites
blobface Posted March 7, 2015 Report Share Posted March 7, 2015 The one on my Ace1's lens came off like instantly lol, had to glue it back on. Link to post Share on other sites
FTZ-WildeCard Posted March 10, 2015 Report Share Posted March 10, 2015 Looking to airgun or less expensive RMR-alike models... any available that might be able to go onto the FNX? I was thinking Holosun, but I think theirs is more like a Docter red dot sight. Link to post Share on other sites
Alias1983 Posted March 13, 2015 Report Share Posted March 13, 2015 I really want the fnx but I haven't heard much other than the right side slide release is rough. I really want the we xdm 3.8 but I dont know if I want another 2nd kinda cool. Link to post Share on other sites
Im going space Posted March 13, 2015 Report Share Posted March 13, 2015 I haven't noticed anything other than the loafy slide release. And the spring I broke, but that was me, not the gun! Link to post Share on other sites
Alias1983 Posted March 13, 2015 Report Share Posted March 13, 2015 What spring Link to post Share on other sites
Im going space Posted March 13, 2015 Report Share Posted March 13, 2015 Holds the outer barrel to the hop. Didn't realise it was there and overstretched it. Replaced it with one I made from a longer spring Link to post Share on other sites
Alias1983 Posted March 13, 2015 Report Share Posted March 13, 2015 Ahh, you get good efficiency on gg? Link to post Share on other sites
Im going space Posted March 13, 2015 Report Share Posted March 13, 2015 i use black gas, and yeah, it'll dump a mag and then some happily in rapid fire. Link to post Share on other sites
Alias1983 Posted March 13, 2015 Report Share Posted March 13, 2015 Good to hear thanks Link to post Share on other sites
Dj_komodo Posted March 13, 2015 Report Share Posted March 13, 2015 the right hand slide release problem is an easy fix... Link to post Share on other sites
Im going space Posted March 14, 2015 Report Share Posted March 14, 2015 Still need to do that one actually. Never use it though. Link to post Share on other sites
rusTORK Posted May 6, 2015 Report Share Posted May 6, 2015 Anybody know which inner barrel Cybergun FNX-45 Tactical is compatible with? I think it may solve an issue with Ace 1 Arms OSP Range Up suppressor (longer inner barrel). Outer Barrel chamber have got wrong dimensions. B'coz of that there is a hole between slide and chamber. 50 by rustork, on Flickr 51 by rustork, on Flickr Chember from side look's like ideal square. Real steal have diffirent shape. INOKATSU still look's like copy of Cybergun chamber. Steel, but wrong. P.S. Also, on my gun was missed spring from loaded chamber indicator (part #01-4). Easy to fix, but requied disassembling of teh slide. Link to post Share on other sites
RacingManiac Posted May 6, 2015 Report Share Posted May 6, 2015 Is that intentional though? The actual lockup design of a RS gun is designed to be overcome by the recoil force of the round, which there are minute amount of in a GBB. Most of the newer Hi-Capa/1911 custom slide/barrel have gone with no real lockup design now because it wears less and less likely to have fit issue. Link to post Share on other sites
Zereck Posted May 7, 2015 Report Share Posted May 7, 2015 I have a Hi-Capa 5.1 inner barrel(112.5mm) in mine and it's still too short to reach the OSP's inner barrel. I think you need a 120mm long barrel at least. Link to post Share on other sites
rusTORK Posted May 11, 2015 Report Share Posted May 11, 2015 I am back with photo and scheme. Inside inner barrels. From FNX-45 Tactical chamber side. No connection between barrels. Scheme. Black color - FNX-45 Tactical outer barrel Brass color - FNX-45 Tactical inner barrel Silver color - Ace 1 Arms OSP Inner barrel Orange color - Ace 1 Arms OSP Suppressor So, if my calculation is correct FNX-45 Tactical inner barrel is shorter on 6 mm. That mean, your need TM compatible inner barrel minimum 116 mm long (inner barrel from muzzle cut is 16mm, outer barrel thread is 11mm. Also 1mm from Ace 1 Arms inner barrel, b'coz it's inside piston. 16-11+1=6. P.S. Sheme is contain text on Russian b'coz it's originally made for my review of FNX-45 Tactical. Link to post Share on other sites
rusTORK Posted May 16, 2015 Report Share Posted May 16, 2015 Small correction. It's shorter on 7mm. After connection suppressor inner barrel will go inside pistol inner barrel on 1mm. FNX-45 Tactical Giagrams\Partlists Link to post Share on other sites
Audaxity Posted June 29, 2015 Report Share Posted June 29, 2015 Noob question I know, but does anyone know which of the Ace 1 Arms OSP suppressors fit/are meant for the FNX? (7 inch or 8 inch, is there even a difference?) I know you need the 16mm attachment, but am not sure if the 7 inch or 8 inch version is the right size for the FNX. Link to post Share on other sites
Im going space Posted June 29, 2015 Report Share Posted June 29, 2015 i use the 7", but there's no real "correct" one. Link to post Share on other sites
rusTORK Posted June 29, 2015 Report Share Posted June 29, 2015 8" version for .45 ACP, 7" version for 9mm. Just check SilencerCo site. Link to post Share on other sites
Audaxity Posted June 29, 2015 Report Share Posted June 29, 2015 So for realism you would want the 8" version... But I'm more concerned with functionality. Anyone have experience with the 7" version mounted on theirs? I have that one being shipped to me right now but I have heard rumors that you have to take out the inner barrel to make it work with the FNX and stuff like that which has me worried. Link to post Share on other sites
Im going space Posted June 29, 2015 Report Share Posted June 29, 2015 i stand corrected. thanks RUStork.As i say. been using the 7" on mine. had to take the barrel out because of the FPS! barrels set and joined quite well. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.