aac Posted March 24, 2014 Author Report Share Posted March 24, 2014 Hello members Toward my project i am searching a metal m4 receiver. damages are not an issue, because i want a weared off look the budget is limited to €20 a €30 Link to post Share on other sites
aac Posted March 25, 2014 Author Report Share Posted March 25, 2014 Hello members, some (little) progress on the barrel group, (more pic's are already post earlier in this topic) Once again the part's outer barrel, DD barrel nut, MK12 gasblock with gastube, KAC flash hider the assembled barrel group some sneak previews the barrel mounted on the receiver and with the RIS mounted side view of the RIS bottom view another side view and with mag Link to post Share on other sites
Roland1014 Posted March 25, 2014 Report Share Posted March 25, 2014 You should make and sell these as kits. DevT6 would fall in love with you. Link to post Share on other sites
T.w.a.T. Posted March 25, 2014 Report Share Posted March 25, 2014 Nice work. Keep it coming. Are you keeping the color of the receiver and the stock? Link to post Share on other sites
aac Posted March 25, 2014 Author Report Share Posted March 25, 2014 i am searching an old metal receiver, and will do "a wheatered off" look, with it the stock i will keep, i think, Link to post Share on other sites
aac Posted April 12, 2014 Author Report Share Posted April 12, 2014 Hello members, some little progres on my project. The barrel group is put aside at this moment, because i am awaiting for some parts, and tools. -Tools, to make the "DD" marking's in the barrel -Part's, A metal hop hup unit, and a bucking from Gunfire. Meanwhile i started to make a steel receiver extension, i decided to make the comercial variant, due to the multiple stock positions. the tube is made out of steel pipe, i wil make it thicker and heavier than the original one. this to restore the balance, due to the heavier barrel group&Ris here the first progress the threated tube the block with the stock position holes, was hard-soldered to the tube, and the piece was sand blasted test fit on the receiver i also made marking's on top to see the position of the stock Link to post Share on other sites
aac Posted April 12, 2014 Author Report Share Posted April 12, 2014 I started to make a CQD sling plate Link to post Share on other sites
DarkLite Posted April 13, 2014 Report Share Posted April 13, 2014 STOP BEING SO GREAT AT EVERYTHING DAMN IT Link to post Share on other sites
PureSilver Posted April 13, 2014 Report Share Posted April 13, 2014 This is pretty crazy work for a manual machinist... Link to post Share on other sites
aac Posted April 20, 2014 Author Report Share Posted April 20, 2014 Hello members the latest progress om my project I wanted to experiment a little with colors, and techniques so i started with purchasing some fosco colors. I spray- painted al the receiver extension part's in an other color, for a more realistic appearance and then buffed them, with a fine abbrasive, and scotch brite, to give them a "weared off look" The parts assembled on the receiver Link to post Share on other sites
aac Posted April 20, 2014 Author Report Share Posted April 20, 2014 An experimental "paint job" on a metal stanag mag I painted the entire mag with "battleship grey", and the wheatered the mag. Link to post Share on other sites
aac Posted April 20, 2014 Author Report Share Posted April 20, 2014 And a paintjob on the KAC QD flash hider Link to post Share on other sites
T.w.a.T. Posted April 21, 2014 Report Share Posted April 21, 2014 Nice work man, nice. I wish to have the time and machinery to do some small bits myself, but we all know the answer on that. Link to post Share on other sites
aac Posted June 12, 2014 Author Report Share Posted June 12, 2014 Hello members, It's been a while since i posted some new progres, because i was busy and i had to made plan's, witch consumed pretty much time the next chapter includes the BUIS from KAC this is what i have in mind and here is the first milling work of the block Making of the picatinny fixation testfitting on a broken piece rail of an mp7 the further milling, the opening for the windage system, and the holes for the click-system the elevation drum a special tool, made for punching in the markings Link to post Share on other sites
aac Posted June 15, 2014 Author Report Share Posted June 15, 2014 The today progres in my project finishing of the fixed block, with small files the ajustable diopterholder pre-assembled, raised configuration and in folded down position Link to post Share on other sites
kojak Posted June 15, 2014 Report Share Posted June 15, 2014 Awesome, but you probably knew that already. If I had your skills I'd make a Surefire FH556-RC-12x28 flash hider and SOCOM556-RC suppressor, since they don't exist in airsoft form yet and seem to be replacing the NT4 on newer USSOCOM CQBRs. Link to post Share on other sites
T.w.a.T. Posted June 16, 2014 Report Share Posted June 16, 2014 Awesome, but you probably knew that already. If I had your skills I'd make a Surefire FH556-RC-12x28 flash hider and SOCOM556-RC suppressor, since they don't exist in airsoft form yet and seem to be replacing the NT4 on newer USSOCOM CQBRs. Ye, that will be a nice touch. Can I have one for me as well, please? Link to post Share on other sites
aac Posted June 16, 2014 Author Report Share Posted June 16, 2014 Awesome, but you probably knew that already. If I had your skills I'd make a Surefire FH556-RC-12x28 flash hider and SOCOM556-RC suppressor, since they don't exist in airsoft form yet and seem to be replacing the NT4 on newer USSOCOM CQBRs. Interesting, what's your information source Link to post Share on other sites
kojak Posted June 16, 2014 Report Share Posted June 16, 2014 Interesting, what's your information source I don't believe there's any official documentation; my understanding of the most current setup is based on photos, secondhand knowledge and anecdotes. Just as the WMX200, LA-5A/PEQ, and EXPS3-2 have largely replaced the M3X, AN/PEQ-15 and 553, most recent photos of CQBRs in use have the distinctive long four-pronged FH or 556RC can. A few examples: Link to post Share on other sites
aac Posted June 16, 2014 Author Report Share Posted June 16, 2014 thank you very much for your information updates, if you have more advice(s) for my project, your welcome. Link to post Share on other sites
aac Posted July 13, 2014 Author Report Share Posted July 13, 2014 Hello members, The final progress on my KAC rear Back Up sight The only thing that's left is finding a 7mm circlip. first pic. the sandblasted parts, ready to be spraypainted. Then the painted parts, in an exploded layout to show al the used components the painted, unweathered, assembled sight folded down raised position the weathered sight on the replica, in folded down position in raised position other side down position raised Link to post Share on other sites
emp3ror86 Posted July 13, 2014 Report Share Posted July 13, 2014 Mind is blown. Awesome work pal. Link to post Share on other sites
bn_ Posted July 14, 2014 Report Share Posted July 14, 2014 *fap fap fap* I must say amazing work! I'm subscribing to this thread! Link to post Share on other sites
aac Posted August 19, 2014 Author Report Share Posted August 19, 2014 The fourth chapter in my MK18 project, the BUIS (I also envite newbies to view the topic from the beginning) After the rear sight was finished, i started making the mk18 front flip up sight Here the raw unmachined material The base plate from above the base plate upside down testfitting the retaining v-block The sight tower in progress Tesffitting the assembly on the RIS fold down position fold up position Link to post Share on other sites
aac Posted August 22, 2014 Author Report Share Posted August 22, 2014 Hello shooters, My last progress on the MK18 front sight. rounding edges, bending the "ears" of the "tower" and the smal parts, the ski-stick is the front sight post. On the Ris up and down flipped View true the diopter Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.