aac Posted March 17, 2014 Report Share Posted March 17, 2014 Hello members, This topic for my ACBC MK18 project Today i removed my outer barrel, and destroyed my bucking i will show the pic's. Please tell me what you see, it's my first time i removed a barrel i s this a usual construction ? and what are the grooves in de inner barrel ? how do you see the position ? http://imgur.com/a/WDnxa#0 Link to post Share on other sites
Nath Posted March 18, 2014 Report Share Posted March 18, 2014 You removed the inner barrel without removing the hop up chamber from the receiver. To avoid this problem in the future remove the upper receiver, remove the inner barrel with hu chamber and after that strip the upper from delta ring and remove the outer barrel. Link to post Share on other sites
aac Posted March 18, 2014 Author Report Share Posted March 18, 2014 Hello Nath, Is it posible that the innerbarrel, slides into the HU without being hold by a clip ? there's only a spring, that holds a small ring, and that ring hold's the bucking in place check de foto's Link to post Share on other sites
Nath Posted March 20, 2014 Report Share Posted March 20, 2014 Yep it is possible to force-remove the inner barrel with bucking from the hu unit without the u shaped clip being removed, 9 times out of 10 the bucking gets thorn. Remove the hu unit from the receiver and check if there is a small u shaped clip attached to the hu unit. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.