Alkany Posted August 5, 2014 Report Share Posted August 5, 2014 Hey guys, Here is my detailed long-term review of the WE Katana M4A1 pointing out all design flaws and recommendations to make it last a while. Also included is a short comparison to the A&K M4A1 PTW clone. http://www.youtube.com/watch?v=71BUQTChDx4 Tuning List: Modify Gearset Smooth Torque Matrix Magnum Torque Motor Madbull 6,01 363mm inner barrel ASCU Gen. 3+ V2 A&K PTW Piston WE Katana Upgrade Set Best regards Quote Link to post Share on other sites
SuperCriollo Posted August 9, 2014 Report Share Posted August 9, 2014 Why would you get Modify gears. They aren't the best in my experience. A much better choice would be Core/SHS/ZCI if you are in a budget, or Lonex or Siegeteck if u have the funds. Quote Link to post Share on other sites
LordElpus Posted August 9, 2014 Report Share Posted August 9, 2014 can't say it's much of a "longterm review" as there is bugger all WE left in the gearbox. As to Modify gearsets, never had any issues with the Smooth sets I have. Quote Link to post Share on other sites
Lone_Bullet Posted August 10, 2014 Report Share Posted August 10, 2014 AirSoftMechanics is quite a bit biased against modify, but then again they try tend to push airsoft internals to breaking point. Look it up to put your mind at rest. Quote Link to post Share on other sites
LordElpus Posted August 11, 2014 Report Share Posted August 11, 2014 and they seem to be up siegeteks *albartroth* Quote Link to post Share on other sites
intinerious Posted August 11, 2014 Report Share Posted August 11, 2014 and they seem to be up siegeteks *albartroth* Have you owned a set of siegetek gears? Quote Link to post Share on other sites
LordElpus Posted August 11, 2014 Report Share Posted August 11, 2014 (edited) Got no intention of doing so, completely OTT for UK power levels. Edited August 11, 2014 by LordElpus Quote Link to post Share on other sites
intinerious Posted August 12, 2014 Report Share Posted August 12, 2014 Got no intention of doing so, completely OTT for UK power levels. I see, I was just wondering whether you had any issues with Seigetek from your previous post That said RiotSC have gearsets that set his products apart from the rest of the manufacturers, like his 10.44:1 gears and his dual sector gear. His stuff IMO shouldn't be looked at purely on a durability basis. Anyway, deviating from his topic, so I'll shut up n Quote Link to post Share on other sites
Alkany Posted September 17, 2014 Author Report Share Posted September 17, 2014 Hey Guys, I have done a little tutorial on how to upgrade the Cylinder of the Katana to make it last longer: https://www.youtube.com/watch?v=_6kduhS1J1s Quote Link to post Share on other sites
Alkany Posted September 22, 2014 Author Report Share Posted September 22, 2014 To make everything complete I also did a video guide on how to upgrade the Gearbox of the WE Katana with Siegetek gears and the ASCU. Check it out here: http://www.youtube.com/watch?v=COnv28SOxdY Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.