DeltaZero Posted January 13, 2016 Author Report Share Posted January 13, 2016 Well you won't get 2 barrels you'll get the right one for your slide Quote Link to post Share on other sites
Squad 701 Posted January 14, 2016 Report Share Posted January 14, 2016 If your thinking of purchasing either of the Nova M&P Performance Center kits - don't delay, as there is a limited amount of 100 pieces only for the Japan/Hong Kong market. Quote Link to post Share on other sites
BioRage Posted January 14, 2016 Report Share Posted January 14, 2016 So who wants to grab it first? Quote Link to post Share on other sites
Inspector Posted January 19, 2016 Report Share Posted January 19, 2016 I know this is the wrong place to ask this but I have 6 tokyo marui M&P guns in different forms of customs. I was really thinking of getting a SAI Nova Slide and a WE M&Pc and making the SAI compact M&P. Has anyone had any dealings with the WE M&P compacts? I had one of the early model "Big Birds" and it just flat out failed and didn't ever work properly. Are there any of the same issues with the compact? Maybe the newer generations don't have the same issues? Any experience would be great. Quote Link to post Share on other sites
DeltaZero Posted January 20, 2016 Author Report Share Posted January 20, 2016 No idea I'm afraid.. maybe the best bet would be to ask in the WE M*&P thread? Quote Link to post Share on other sites
BioRage Posted January 29, 2016 Report Share Posted January 29, 2016 (edited) Brilliant, Blue Gasket maker'd my leaky mag,let it cure for 24-48 hours.. filled it with duster, emptied it, repeat. Put some air in, no leaks or nada for being left over night in my cold basement. 10/10 need to gasket maker all gas mags when the time comes. Edited January 29, 2016 by BioRage 1 Quote Link to post Share on other sites
Alias1983 Posted January 29, 2016 Report Share Posted January 29, 2016 I hate mags that have pins, pins deform, holes deform, orings can only expand so much. Why do manufactures do this? Quote Link to post Share on other sites
Richard Y Posted January 30, 2016 Report Share Posted January 30, 2016 I hate mags that have pins, pins deform, holes deform, orings can only expand so much. Why do manufactures do this? They probably figure a screw going through the middle affects the gas fill in some way. Or that it's the only way to actually make it. Also the manual shows the direction to hammer the pins out, I've seen a lot of you tube vids that don't observe this, which will make the holes loose. The pins and housing parts are replaceable. If you get to the point when these issues are happening you would assume your mags are 1 to 2 years old. In witch case you can't really begrudge your mag a new o ring, Bb lip, housing and pins if it needs it. 1 Quote Link to post Share on other sites
Inspector Posted February 2, 2016 Report Share Posted February 2, 2016 Will other upgraded recoil springs work with the M&P besides the one made for the M&P? I'm having a difficult time finding them in stock. Quote Link to post Share on other sites
BioRage Posted February 12, 2016 Report Share Posted February 12, 2016 ^I would suspect 1911 or hi-crapa ones would work with some cutting. Don't quote me on it, it worked for my other pistols though, haha. Took mine apart, for the second time now, (First time I slid the slide off, and my thumb got caught in the middle area of the lower... and sliced off a chunk of my thumb, healing took 2.5 weeks.) Now for the second time, I removed it slowly with gloves... and it's finally upgraded to the max.. put in a UAC piston head, air seals seems to be tighter.. (atleast when I rack it, bit stiffer then I recall). Noticed a ton of screws were coming loose - the one on the UAC aluminium nozzle.. loctited that, my rear sight screws both came loose, so those had to be loctited aswell.. added some into the UAC piston head screw too... and everywhere I deemed necessary. Game tomorrow indoors, will see how it performs. Picked up 2 more mags, so now I'm at 1+5 paired with my APS AOW .. 3+1 (22 shells).. should be great for indoor domination. Else comes to worse, VFC CQB AEG as backup. I should really mount my camera back on my helmet... M&P performed like a beast the last CQB game I was, really saw no need for my GHK M4.. which is why I parted it. 1 Quote Link to post Share on other sites
DeltaZero Posted February 12, 2016 Author Report Share Posted February 12, 2016 TM Glock 17 springs work pretty well.. I think there is something about it previously in this thread. I had one in there at the beginning before the dedicated upgrade springs were released. Quote Link to post Share on other sites
Zereck Posted February 13, 2016 Report Share Posted February 13, 2016 My experience with the UAC nozzle and piston head wasn't so good. The latter is ok but I lose around 20 FPS, while the nozzle makes the gun less snappy(don't know if it needs a break in). Also Boomarms still owes me a Detonator VTAC sight. :/ Quote Link to post Share on other sites
DeltaZero Posted February 13, 2016 Author Report Share Posted February 13, 2016 (edited) I love the UAC nozzle i have in mine (has had roughly 15k rounds through it so maybe more worn in than yours).. makes it awesome IMO and means I can put whatever gas I want through it. I havent used the piston head though, I'm currently using a nineball one. Edited February 13, 2016 by DeltaZero Quote Link to post Share on other sites
BioRage Posted February 15, 2016 Report Share Posted February 15, 2016 Hmm my shots curve left and right I've noticed when I game, the f? Need to verify.. Odd Think it's the rubber paired with nine ball inner. "Maple Leaf Monster Hop Up Rubber 70 Degree for Tokyo Marui / WE GBB & VSR" Quote Link to post Share on other sites
gogojuice Posted February 15, 2016 Report Share Posted February 15, 2016 Anyone having there slide not come all the way back after shooting. Mine seems very weak. Played an indoor game this am and my M&P9 was spastic at best. Is there anything I can do to make it come back snapper? The gun has no problem firing.... it's just that the last couple of mm. Thanks Quote Link to post Share on other sites
BioRage Posted February 15, 2016 Report Share Posted February 15, 2016 Anyone having there slide not come all the way back after shooting. Mine seems very weak. Played an indoor game this am and my M&P9 was spastic at best. Is there anything I can do to make it come back snapper? The gun has no problem firing.... it's just that the last couple of mm. Thanks Recoil spring. 1 Quote Link to post Share on other sites
gogojuice Posted February 15, 2016 Report Share Posted February 15, 2016 Any recommendations on which one or where to get one up here? Quote Link to post Share on other sites
BioRage Posted February 15, 2016 Report Share Posted February 15, 2016 Any recommendations on which one or where to get one up here? http://shop.ehobbyasia.com/sa-150-enhanced-recoil-spring-for-marui-m-p9-gbb.html:) Might aswell get other stuff while you're at it! 1 Quote Link to post Share on other sites
DeltaZero Posted February 15, 2016 Author Report Share Posted February 15, 2016 Get all the things!! Quote Link to post Share on other sites
mike735 Posted February 22, 2016 Report Share Posted February 22, 2016 I ordered the Nova 4.5 Performance Center Slide kit ( I want to practice using a red dot) for my TM M&P and have a problem. The BBU does not have slot/space for the nozzle return spring like the stock unit. I install it without the spring and it work somewhat if the piston was lubricated heavily. But then it started to fail to go into battery or would not load BBs from the magazine. I tried placing the spring on the right side of the BBU and this kind of worked but the spring became dislodge and the pistol stopped working. Am I missing something is there some way to install the spring or use another method to make the pistol function. I have been using a Nova standard metal slide with propane and it has worked with no problems for thousands of rounds. Any help is appreciated. 1 Quote Link to post Share on other sites
Squad 701 Posted February 24, 2016 Report Share Posted February 24, 2016 Hey Mike 735, The nozzle Spring needs a G18/P226 Spring-pin attached to it to extend the length.... Unless you can find a longer spring or improvise to make the stock Spring longer.. No idea why this wasn't included or mentioned with the kit Cheers. 1 Quote Link to post Share on other sites
mike735 Posted February 24, 2016 Report Share Posted February 24, 2016 Squad 701 Thanks for the info I will look into sourcing one or fabbing something up. Quote Link to post Share on other sites
viking252200 Posted February 28, 2016 Report Share Posted February 28, 2016 I just thought I would show you a little modification i did to my ready fighter trigger... Adjustable trigger with shortened and lightened pull With a little filing of the trigger bar this is the result...a trigger travel of less than 3mm. 2 Quote Link to post Share on other sites
L2E Posted March 2, 2016 Report Share Posted March 2, 2016 Hey Mike 735, The nozzle Spring needs a G18/P226 Spring-pin attached to it to extend the length.... Unless you can find a longer spring or improvise to make the stock Spring longer.. No idea why this wasn't included or mentioned with the kit Cheers. This is very good information! 1 Quote Link to post Share on other sites
uscmCorps Posted March 5, 2016 Report Share Posted March 5, 2016 Thought you guys might find this interesting. I had some spare Tango Down / Vickers M&P base pads (RS) laying around. I figured I'd give them another try on my TM M&P. They are a very tight fit ... but they do fit. You'd need to use a rubber mallet to get them on, and would have to drill a hole for the fill valve, however, once fitted they should work fine with the Marui M&P. YMMV and I still have to drill the holes but I thought this was a cool way to add another interesting accessory to these guns that was somewhat inexpensive to achieve. 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.