bobthebuilder Posted September 6, 2014 Report Share Posted September 6, 2014 Finally got myself a proper smart charger, spesifically an Imax B6. Only to discover that it has a bewildering number of settings that I don't understand, and a manual that might as well be written in Klingon for all the help it gives me. Can anyone talk me through the appropriate settings for charging and discharging my 1600mah and 1100mah 8.4v Ni-Mh batteries? Link to post Share on other sites
SteevoLS Posted September 6, 2014 Report Share Posted September 6, 2014 Select program NiMh batt, Press Start/EnterChoose NiMh charge using "Dec" and "Inc"Press Start/Enter, "0.1A" starts flashingPress BOTH "Dec" and "Inc" at the same time (while 0.1 or other current is flashing) to change between automatic and manual mode. Link to post Share on other sites
bobthebuilder Posted September 6, 2014 Author Report Share Posted September 6, 2014 Thanks! An automatic mode makes my life much easier! Link to post Share on other sites
Aod Posted September 7, 2014 Report Share Posted September 7, 2014 Select program NiMh batt, Press Start/Enter Choose NiMh charge using "Dec" and "Inc" Press Start/Enter, "0.1A" starts flashing Press BOTH "Dec" and "Inc" at the same time (while 0.1 or other current is flashing) to change between automatic and manual mode. Oh so that's how the imax/Turnigy chargers select Auto for NiMH batteries! Awesome Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.