ArthurMachen Posted February 12, 2015 Report Share Posted February 12, 2015 Sad to hear someone else having the same experience with their support... Not good. We should try to make them understand that is not acceptable... Yes, its 100% unacceptable! Ive the Feeling they may answer on simple Product Questions or to sell something in ACE1 Online Store, but obviously not when youve serious Problems with their Products! We should write bad Reviews on some Shop Sites, (ofcourse fair and objective!), maybe some People wont buy it anymore and ACE1 tries to make them better with enhanced Quality Control Look to the Primary Arms Optics from USA! Their Micro Dot is under 100$ and fully made in China, but the Quality is awesome for the Money and so far away from any Airsoft Clone Optic....... so yes, its possible!! 1 Quote Link to post Share on other sites
Safeword Posted February 12, 2015 Report Share Posted February 12, 2015 Have you the ACE1 RMR ? How appears your Dot ? Im still very unlucky with mine and it seems like ACE1 does not give any Support...no reply from them! Not sure if I got the Ace1, bought mine from ebairsoft: http://www.ebairsoft.com/style-side-control-sensor-reflex-sight-p-6870.html Quote Link to post Share on other sites
Hanfritter Posted February 12, 2015 Report Share Posted February 12, 2015 Look to the Primary Arms Optics from USA! Their Micro Dot is under 100$ and fully made in China, but the Quality is awesome for the Money and so far away from any Airsoft Clone Optic....... so yes, its possible!! Does anyone happen to know, whether the Primary Arms Micro Dot would fit the FNX-mounts? Quote Link to post Share on other sites
Im going space Posted February 12, 2015 Report Share Posted February 12, 2015 (edited) Looks like it should do! (With the middle section) Edited February 12, 2015 by Im going space Quote Link to post Share on other sites
ArthurMachen Posted February 12, 2015 Report Share Posted February 12, 2015 (edited) Not sure if I got the Ace1, bought mine from ebairsoft: http://www.ebairsoft.com/style-side-control-sensor-reflex-sight-p-6870.html No this not the ACE1 Sorry to say it but the ebairsoft Clone is garbage wouldnt buy it !The ACE1 RMR is a lot better, even with all its Problems @Hanfritter No Real Docter Sight (so the PA too ) ,Burris or even a Trijicon RMR fits to any Cybergun FNX Mount available Edited February 12, 2015 by ArthurMachen Quote Link to post Share on other sites
Safeword Posted February 12, 2015 Report Share Posted February 12, 2015 No this not the ACE1 Sorry to say it but the ebairsoft Clone is garbage wouldnt buy it !The ACE1 RMR is a lot better, even with all its Problems @Hanfritter No Real Docter Sight (so the PA too ) ,Burris or even a Trijicon RMR fits to any Cybergun FNX Mount available Yeah I heard it suck but I mostly collect airsoft guns so its most for show anyhow Quote Link to post Share on other sites
Hanfritter Posted February 12, 2015 Report Share Posted February 12, 2015 @Hanfritter No Real Docter Sight (so the PA too ) ,Burris or even a Trijicon RMR fits to any Cybergun FNX Mount available Why did i suspect something like this would be the case.... I sure hope, someone comes up with a mount for the original doctor sights. But it's safe to assume, the PA-micro dot will fit on any mount, the original RMRs and Trijicons fit onto? Quote Link to post Share on other sites
ArthurMachen Posted February 12, 2015 Report Share Posted February 12, 2015 So far i know Docter SIght Mount is is not compatible with Trijicon Mounts (only with Adapter Plates) Im not sure about the Primary Arms Reflex Sight Mount 1 Quote Link to post Share on other sites
aznriptide859 Posted February 12, 2015 Report Share Posted February 12, 2015 PA one has the same mounting holes as Docter's. 1 Quote Link to post Share on other sites
Hanfritter Posted February 12, 2015 Report Share Posted February 12, 2015 Thanks for the info Quote Link to post Share on other sites
Zereck Posted February 12, 2015 Report Share Posted February 12, 2015 Not sure if I got the Ace1, bought mine from ebairsoft: http://www.ebairsoft.com/style-side-control-sensor-reflex-sight-p-6870.html I have this and as I mentioned before it works perfectly(bright and keeps the dot in place after 100s of rounds). There is another RMR on Samoon's site which it claims to be "shockproof". Quote Link to post Share on other sites
ArthurMachen Posted February 13, 2015 Report Share Posted February 13, 2015 I have this and as I mentioned before it works perfectly(bright and keeps the dot in place after 100s of rounds). There is another RMR on Samoon's site which it claims to be "shockproof". The one on the Samoon Site should be Clone with PTP Markings on the Package This clone ist shockproofed but the is Dot so gigantic and unusable Imho the ACE1 is the best of all RMR Clones. When youve a working one with more or less round Dot and working Battery Connector this is the Way to go. Quote Link to post Share on other sites
Im going space Posted February 19, 2015 Report Share Posted February 19, 2015 Well, fixed the leaky mag, blowtorch and a gluegun just about sorted it (well its holding black gas, so 200+ psi) Tidied up the holster, works well. And the gun cycles well with a tracer (emptied the mag and locked) So i will be fettling with the osprey to fit a tracer system into it, most likely a permanently on one (switch of course) 1 Quote Link to post Share on other sites
bankz5152 Posted February 20, 2015 Report Share Posted February 20, 2015 If its 16mm Lees Precision engineering on my phone, my spelling will suck Quote Link to post Share on other sites
Im going space Posted February 20, 2015 Report Share Posted February 20, 2015 LC's engineering outpost (on FB) can make you one relatively cheap.its 16mm +ve (16x1mm i think) Quote Link to post Share on other sites
NonEx Posted February 20, 2015 Report Share Posted February 20, 2015 There's also this: http://shop.ehobbyasia.com/tonic-airsoft-16mm-thread-protector.html#.VOcQiS5SXpo If it's CW. Quote Link to post Share on other sites
Zereck Posted February 20, 2015 Report Share Posted February 20, 2015 There's also this: http://shop.ehobbyasia.com/tonic-airsoft-16mm-thread-protector.html#.VOcQiS5SXpo If it's CW. It is CW. Is there even a CCW 16mm thread on any gun? Quote Link to post Share on other sites
tyguy94920 Posted February 22, 2015 Report Share Posted February 22, 2015 Why did i suspect something like this would be the case.... I sure hope, someone comes up with a mount for the original doctor sights. But it's safe to assume, the PA-micro dot will fit on any mount, the original RMRs and Trijicons fit onto? Except the Doctor style MRDS's don't need a mount to fit to the Cybergun, they'll screw right onto the BBU Quote Link to post Share on other sites
tyguy94920 Posted February 22, 2015 Report Share Posted February 22, 2015 It is CW. Is there even a CCW 16mm thread on any gun? Real Steel USP, Glock, Sig? For airsoft you can use a real Mk.23 one found on HKparts Quote Link to post Share on other sites
ArthurMachen Posted February 26, 2015 Report Share Posted February 26, 2015 (edited) Except the Doctor style MRDS's don't need a mount to fit to the Cybergun, they'll screw right onto the BBU But theres not even a Plain Surface to mount a Red Dot without Adapter Plate..so how can a Red Dot screw onto the BBU ? Its higher in the Middle so you need a Adapter Plate in any case imho Edited February 26, 2015 by ArthurMachen Quote Link to post Share on other sites
tyguy94920 Posted February 27, 2015 Report Share Posted February 27, 2015 Well, using the real FN-tac's doctor adapter plate as an example. There's holes in the BBU and holes in the MRDS and if you use two screws you can attach them together Quote Link to post Share on other sites
Habakure Posted February 27, 2015 Report Share Posted February 27, 2015 (edited) Just to clarify, tyguy94924, you've done this (mounting with a real FNX plate onto a Cybergun FNX) yourself or have seen someone do it? Maybe my memory is a bit hazy, but I seem to recall a user on here saying the holes are different and that the ridge gets in the way. . . Edited February 27, 2015 by Habakure 1 Quote Link to post Share on other sites
DeltaZero Posted February 27, 2015 Author Report Share Posted February 27, 2015 Pretty sure it was him who said it.. But I'm not really sure what's happening now. I know he has both RS and VFC FNX's though, so he would be the one to check it out. Quote Link to post Share on other sites
hitmanNo2 Posted February 27, 2015 Report Share Posted February 27, 2015 So the Doctor sight sits on the ridge on the BBU whilst the screws go either side on the lower flats? You should be able to see the screws right? Quote Link to post Share on other sites
Habakure Posted March 1, 2015 Report Share Posted March 1, 2015 That's my thinking too, HitmanNo2. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.