Im going space Posted January 29, 2015 Report Share Posted January 29, 2015 oh i see the pic now. missed that post!Looks like one of two things: 1) the arm is bent (its thin metal) 2) rubber is not sat straight. Quote Link to post Share on other sites
hiawatha Posted January 29, 2015 Report Share Posted January 29, 2015 (edited) haha It looks to me thats the arm is slightly bent. Any instructions on how to disassemble the hop ? Edited January 29, 2015 by hiawatha Quote Link to post Share on other sites
Im going space Posted January 29, 2015 Report Share Posted January 29, 2015 two screw on the wheel side, whole unit splits in half. it has a wheel, the arm and a spring (in the front) 1 Quote Link to post Share on other sites
hiawatha Posted January 29, 2015 Report Share Posted January 29, 2015 Thank you sir! I will take a look on it. Quote Link to post Share on other sites
Im going space Posted January 29, 2015 Report Share Posted January 29, 2015 Well im one mag down. Never going to find a replacement for that o ring Quote Link to post Share on other sites
Im going space Posted January 29, 2015 Report Share Posted January 29, 2015 However, in absence of my APL, ive "improvised" 3 Quote Link to post Share on other sites
hiawatha Posted January 29, 2015 Report Share Posted January 29, 2015 Seems like the metal arm was slightly bent. Its hard getting it to press even on the rubber Thanks! Quote Link to post Share on other sites
Im going space Posted January 30, 2015 Report Share Posted January 30, 2015 Well the ace1 rmr arrived. The rail mount is neat. The rmr is definately not as clean as the one from ehobby. Hopefully its a nice performer Quote Link to post Share on other sites
Habakure Posted January 30, 2015 Report Share Posted January 30, 2015 That's interesting about the ace1 arms RMR. Any chance of a picture (I'm a sucker for visual representation of a written description)? Quote Link to post Share on other sites
Im going space Posted January 30, 2015 Report Share Posted January 30, 2015 Ill do a side by side in a second! Quote Link to post Share on other sites
Im going space Posted January 30, 2015 Report Share Posted January 30, 2015 (edited) Ace1 on the left. (Ignore the white stuff in the Right one. Its superglue.) EDIT: it would appear that the ACE 1 is DOA... EDIT2: battery connector bent slightly. Working. Edited January 30, 2015 by Im going space Quote Link to post Share on other sites
Im going space Posted January 30, 2015 Report Share Posted January 30, 2015 On a better note, 15 mins with a dremel and i have my holster. Quote Link to post Share on other sites
AG1212 Posted January 30, 2015 Report Share Posted January 30, 2015 What did you use for the holster? For that matter, what holsters can you mash a FNX into with a bit of work? Quote Link to post Share on other sites
Im going space Posted January 30, 2015 Report Share Posted January 30, 2015 (edited) Fobus EMG 20/21 (the last is alongside another emg 20/21) Edited January 30, 2015 by Im going space 1 Quote Link to post Share on other sites
ArthurMachen Posted February 9, 2015 Report Share Posted February 9, 2015 Hi Today i got my ACE1 RMR Sight. Im very dissapointed! Biggest Problem is the Dot which is not nearly Round. Its a "half Moon shape" , blurry and pixelated! Also the Glass has a very blueish Tint and the Paint Comes off easily How performs your Dot ? Is the Dot round ? Greetings Quote Link to post Share on other sites
Im going space Posted February 9, 2015 Report Share Posted February 9, 2015 my dot is round, and the glass is tinted correctly. key thing is that it's holding zero. but i have no screws that are the right length, if you put pressure onto the battery it cuts out.so i need to trim the longer screws down, and ill have to live with the gap from the o-ring Quote Link to post Share on other sites
ArthurMachen Posted February 9, 2015 Report Share Posted February 9, 2015 (edited) my dot is round, and the glass is tinted correctly. key thing is that it's holding zero. but i have no screws that are the right length, if you put pressure onto the battery it cuts out. so i need to trim the longer screws down, and ill have to live with the gap from the o-ring The Screws from my Azimuth Mount are a bit too short for the ACE1 RMR, But i had longer m3x8 Screws which fits fine I sent a Email to ACE1, the distorted Dot is unacceptable, i hope they send a Replacement I will buy a real Trijicon RMR this Year Edited February 9, 2015 by ArthurMachen Quote Link to post Share on other sites
Im going space Posted February 9, 2015 Report Share Posted February 9, 2015 i was looking at real ones, but they're a little out of my price range!the azimuth ones are about 2mm too short and the others i have are just a tad too long, and push the plate off the gun Quote Link to post Share on other sites
ArthurMachen Posted February 9, 2015 Report Share Posted February 9, 2015 (edited) i was looking at real ones, but they're a little out of my price range! the azimuth ones are about 2mm too short and the others i have are just a tad too long, and push the plate off the gun I think M3x9mm Screws should be perfect Samoon Airsoft offers a RMR Clone too http://samoon.com.tw/conversion-kit/c-scope/mini-owl-sight "This product has test by real gun, and have warranty 6 months. - Shockproof, metal made red dot sight.- With mini appearance." Does somebody knows this Clone ? Edited February 9, 2015 by ArthurMachen Quote Link to post Share on other sites
Im going space Posted February 9, 2015 Report Share Posted February 9, 2015 probably, i'm going to trim these two down, if i don't even try to use them, they'll just get lost Quote Link to post Share on other sites
Safeword Posted February 12, 2015 Report Share Posted February 12, 2015 Just got my RMR in the mail and as others have said, the screws for the azimuth mount are to short, going out to buy m3x8 and hoping they are just the right size Quote Link to post Share on other sites
ArthurMachen Posted February 12, 2015 Report Share Posted February 12, 2015 Just got my RMR in the mail and as others have said, the screws for the azimuth mount are to short, going out to buy m3x8 and hoping they are just the right size Have you the ACE1 RMR ? How appears your Dot ? Im still very unlucky with mine and it seems like ACE1 does not give any Support...no reply from them! 1 Quote Link to post Share on other sites
Im going space Posted February 12, 2015 Report Share Posted February 12, 2015 have fun getting it set right so that there's no pressure on the battery, because its hell. the slightest push on it, and dead. Quote Link to post Share on other sites
NonEx Posted February 12, 2015 Report Share Posted February 12, 2015 (edited) Have you the ACE1 RMR ? How appears your Dot ? Im still very unlucky with mine and it seems like ACE1 does not give any Support...no reply from them! Sad to hear someone else having the same experience with their support... Not good. We should try to make them understand that is not acceptable... Edited February 12, 2015 by NonEx Quote Link to post Share on other sites
Im going space Posted February 12, 2015 Report Share Posted February 12, 2015 (edited) i got a quick response when asking how to turn the bloody thing on, turns out it was what i mentioned above as to why it wouldn't power on. i suppose they dont mind the questions, but avoid the problems. Edited February 12, 2015 by Im going space Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.