christhesecond Report post Posted June 5, 2016 Not sure how much interest there will be for this here but a few people might appreciate it I guess. My current Tm m4 Gbbr build is an NSW "recce rifle" build 1 Share this post Link to post Share on other sites
CaptCalvin Report post Posted June 5, 2016 (edited) Modern consensus regarding burst modes expecially Colt's mechanism seems to lean on the unfavorable side anyway. Non self resetting as well as inconsistent trigger pull depending on which position the ratchet is in makes it very undesirable. Also, you didn't have to swap out the buffer for a rifle length one? Wouldn't you have to stick a massive amount of coins in there otherwise? Edited June 5, 2016 by CaptCalvin Share this post Link to post Share on other sites
Bada Bing Report post Posted June 6, 2016 Modern consensus regarding burst modes expecially Colt's mechanism seems to lean on the unfavorable side anyway. Non self resetting as well as inconsistent trigger pull depending on which position the ratchet is in makes it very undesirable. Also, you didn't have to swap out the buffer for a rifle length one? Wouldn't you have to stick a massive amount of coins in there otherwise? The screw on end cap of the stock tube is elongated and along with the rubber buffer piece making up almost the correct length for the recoil parts. Just the bolt lock wasn't quite catching, this may be because I'm using propane and the bolt carrier is moving too quickly for a positive catch. Manual charging on an empty magazine always has positive lock as well as firing when low on gas. Like very Recce rifle there mate, it's very hot! Share this post Link to post Share on other sites
christhesecond Report post Posted June 6, 2016 Cheers. Needs paint and a can. Waiting on vfc for the can. Share this post Link to post Share on other sites
christhesecond Report post Posted June 28, 2016 And thanks to VFC, here it is! Been having some trouble with mags jamming bbs in them. Using blaster Devils 0.3s. MWS Facebook group has recommended g&g, Tokyo Marui or madbull. Anyone here have any experience with this problem? 1 Share this post Link to post Share on other sites
Bada Bing Report post Posted June 28, 2016 That's pure filth Chris. Good job! I use the same bbs and my mags are fine with them. Are yours new magazines? I found with new TM mags, especially pistols mags, they tend to stick when feeding into the gun. But this passes over a short space of time with general use. Sometimes I'd leave a troubled loaded magazine over night and try again the following day. That's my experiences anyway, it could be as they say on the group page. Ammo related... And I love the night vis camo! Share this post Link to post Share on other sites
christhesecond Report post Posted June 29, 2016 Cheers man. Well I'm gonna get some different ammo just in case. Only seems to happen in the original mag that came with the gun. All he new mags bought last month seem fine so far.... Strangeeeee Share this post Link to post Share on other sites
Alias1983 Report post Posted June 29, 2016 Get them freshness things you find on food and put them in the package. Bbs do swell somehow Share this post Link to post Share on other sites
DeltaZero Report post Posted June 30, 2016 Just seen UAC have a CNCed bolt carrier en route for this. Unsure if its aluminium or steel (I'd place bets on ally). Doesn't look far out either.. Im tempted by a MWS even more now. Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
BioRage Report post Posted June 30, 2016 Just seen UAC have a CNCed bolt carrier en route for this. Unsure if its aluminium or steel (I'd place bets on ally). Doesn't look far out either.. Im tempted by a MWS even more now. Sent from my iPhone using Tapatalk >:| x2 Share this post Link to post Share on other sites
CALLAHAN_88 Report post Posted July 10, 2016 I tested an Magpul Moe Mil-spec stock on mine TM M4 MWS GBB and i fist like a charm! 1 Share this post Link to post Share on other sites
PureSilver Report post Posted July 11, 2016 i fist like a charm! 2 Share this post Link to post Share on other sites
uscmCorps Report post Posted July 11, 2016 Sounds painful. 1 Share this post Link to post Share on other sites
CALLAHAN_88 Report post Posted July 11, 2016 Anybody who has change the pistol grip yet? Share this post Link to post Share on other sites
christhesecond Report post Posted July 12, 2016 Check my pics from the last page dude. Ergo pistol grip fitted. Share this post Link to post Share on other sites
CALLAHAN_88 Report post Posted July 13, 2016 HAHAHA LOL i missed that i was looking at all the other goodies! What sight are that? Share this post Link to post Share on other sites
christhesecond Report post Posted July 13, 2016 Tac-one 12424ir..... It's a replica of a nightforce NXS scope Share this post Link to post Share on other sites
airsoftmatthias Report post Posted July 14, 2016 Very usual question, but what is the outer diameter of the TM MWS barrel? Specifically, the part of the barrel where the gas block sits on? Share this post Link to post Share on other sites
Bastel Report post Posted September 30, 2016 Does anybody knows if a rs or we upper will fit? Share this post Link to post Share on other sites
CaptCalvin Report post Posted September 30, 2016 Nope. Won't fit. Trouble is mainly with the hopup system. Share this post Link to post Share on other sites
Siavash Report post Posted September 30, 2016 We Upper is complete different shape..and few RS steel parts fit but not upper or lower Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Bastel Report post Posted October 11, 2016 Thanks for your answer guys. Can anybody make some pics from the Fire selector for me? Share this post Link to post Share on other sites
CALLAHAN_88 Report post Posted October 21, 2016 Can you change the buffer tube on this gun? I want Strike industries redline! Share this post Link to post Share on other sites
Supernanny Report post Posted October 26, 2016 No, buffer tube is TM spec thread. https://www.facebook.com/groups/954757591262527/ Share this post Link to post Share on other sites
Leshy Report post Posted October 27, 2016 Has anyone installed a wide bore inner, what brand and length? I need to drop my fps to sub 350 from 370. Share this post Link to post Share on other sites