ejovrh Posted February 23, 2016 Report Share Posted February 23, 2016 hi folks i would like to hear your opinion on the various kac nt4 replicas out there, please. - which one (brand/model) do you consider the best? why so? - what do you miss in these replicas? thanks a lot in advance hrvoje Link to post Share on other sites
Beeingmyself Posted February 23, 2016 Report Share Posted February 23, 2016 Get the G&P model. The cheap ACM rip offs are okay the first 5-8 times you remove it but after that it just getting really bad Good thing is that flash hider are videly avaible for use on several guns. It sits firmly and can take som abuse in term of being banged into things as long as it is the G&P one Mine do well on my GHK M4 GBBR as well I'm only using it for gameplays where there is a minimum of length on the guns so don't really have any negative about it. Link to post Share on other sites
christhesecond Posted February 23, 2016 Report Share Posted February 23, 2016 G&p or vfc or nothing Link to post Share on other sites
ejovrh Posted February 23, 2016 Author Report Share Posted February 23, 2016 ok, g&p and vfc, then, for example. if you look at those two - what in your opinion is wrong (as in not correct) with these? e. g. lack of realistic locking mechanism and such... looks? weight? material? again, i'm interested what _you_ think of the existing ones. [ i have a vfc myself and for me i know what i don't like with it.i am not looking for advice to buy one. i want to hear 2nd/3rd opinions... ] Link to post Share on other sites
Mr.Schnabel Posted February 23, 2016 Report Share Posted February 23, 2016 Locking mechanism on G&P and their clones is fruitcage if you ask me, VFC did a better job but still not the best .... As what i am personally missing .... Material / Weight Stamped markings on Heatshield Correct welding Correct locking mechanism Would pay almost any $$$ if someone would finally mak an to RS spec´s NT4 but oh well ... wishfull thinking Link to post Share on other sites
PureSilver Posted February 23, 2016 Report Share Posted February 23, 2016 I've had both the G&P and the VFC and found them very nearly indistinguishable. They have slightly different flash hiders (the VFC one is nicer than the G&P) and as a result they're not compatible, though I think it would only take a file to get them to be compatible. Having not handled a real one my major complaint is the crappy system (one s***y little machine screw) for retaining the heatshield. They're always loose and it's virtually impossible to get them to stop being loose short of JB-welding them in place. After that, it's the usual not-made-of-the-right-materials, not-correctly-engraved, not-welded etc. as usual with airsoft suppressors. Link to post Share on other sites
ejovrh Posted February 23, 2016 Author Report Share Posted February 23, 2016 ok, many thanks so far and keep it coming, please... if anyone is able, please measure me the g&p kac flash hider diameter. diameter as in the widest part - the dimension which corresponds to the inner diameter of the nt4 (the muzzle end). presision to one tenth of a mm, metric, please. the vfc kac flash hider, for instance, has 19.95mm Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.