sandstorm Posted July 11, 2021 Report Share Posted July 11, 2021 5 hours ago, perunanuija said: I wanted to make a Payday 2 kit some years back, go to a convention with some buddies. That idea never took off. Now I'm back, interested in airsoft, looking through heist movie guns. I did find a Tokyo Marui 733, but I was told TM guns have old internals that don't work as well. Well, it'd depend on what version of TM. They have the old AEGS, they have Recoil Shocks which are newer, and they even have their own GBBr system now, but for 733, I think they don't offer it in newer internals yet. 733 is a bit harder to find, anyway, most offer 933, the flattop body with railed front-end, you'd end up hunting for parts... Quote Link to post Share on other sites
perunanuija Posted July 12, 2021 Report Share Posted July 12, 2021 10 hours ago, sandstorm said: Well, it'd depend on what version of TM. They have the old AEGS, they have Recoil Shocks which are newer, and they even have their own GBBr system now, but for 733, I think they don't offer it in newer internals yet. 733 is a bit harder to find, anyway, most offer 933, the flattop body with railed front-end, you'd end up hunting for parts... Yep I did find an Edge -model 733 from Specna Arms too. It has Rock river arms trademarks on it, looks good. I just hate the SA -stamp on the right side of the gun. 1 Quote Link to post Share on other sites
blobface Posted August 25, 2021 Author Report Share Posted August 25, 2021 MGS2 Beretta, cover art version, cheapo trigger guard laser with a 3D printed shroud to make it look more like the cover art one, probably still too small. 5 1 Quote Link to post Share on other sites
CatgutViolin Posted August 27, 2021 Report Share Posted August 27, 2021 Come in, Cooper, do you copy? Cooper, do you read me? Forget about Freeman, we are abandoning the base. If you have any last bomb targets, mark them on the tactical map. Otherwise, get the hell out of there. Repeat, we are pulling out and commencing air strikes. Give us targets, or get below. 11 1 Quote Link to post Share on other sites
PureSilver Posted August 27, 2021 Report Share Posted August 27, 2021 (edited) 10 hours ago, CatgutViolin said: Come in, Cooper, do you copy? Honestly this is so good it's unreal. Edited August 27, 2021 by PureSilver Quote Link to post Share on other sites
CatgutViolin Posted August 27, 2021 Report Share Posted August 27, 2021 (edited) 1 hour ago, PureSilver said: Honestly this is so good it's unreal. I actually have a G&P M203 coming to replace this crappy S&T launcher, which will have the proper U-shaped barrel lug rather than the M4-style QD, and then the gun should be spot-on. This kit was my whole reason for buying 727 parts for my Vipertech (including significantly modifying a real A2 upper to fit), so I definitely wanted to get the gun right. I also want to see if I can rig the backpack directly to the suspenders to replicate the lack of double straps they have going on-game. And, if I can ever find them, get a set of the green laser ballistic outserts. And maybe adapt my Smalltalk voice amplifier to work with the M40. That'd pretty much do it. It was a pretty easy kit to put together considering basically all of it is common surplus or readily available civilian gear. The M40 is by far the hardest part to get, and even that's optional. Edited August 27, 2021 by CatgutViolin Quote Link to post Share on other sites
PureSilver Posted August 27, 2021 Report Share Posted August 27, 2021 59 minutes ago, CatgutViolin said: This kit was my whole reason for buying 727 parts for my Vipertech (including significantly modifying a real A2 upper to fit), so I definitely wanted to get the gun right. Interesting. What mods did the upper need to work with the VT? Quote Link to post Share on other sites
CatgutViolin Posted August 27, 2021 Report Share Posted August 27, 2021 4 minutes ago, PureSilver said: Interesting. What mods did the upper need to work with the VT? Carving out channels for the gas firing pin (valve knocker), which protrudes slightly into the upper. Filing down the barrel nut threading to allow the barrel extension to sit farther into the receiver. Filing out a shallow channel on the side of the receiver for the bolt catch. Filing down the detent housing on the dust cover door (the bolt is a touch wider than a real one in the recessed area so it can't fully close otherwise). Filing out the rear takedown pin to align with the VT lower (rear pin on the VT is very slightly lower than the real thing). So not a drop-in fit by any means, but overall nothing too involved either. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.