HamletV Posted June 4, 2019 Report Share Posted June 4, 2019 Yes, it is stainless steel Quote Link to post Share on other sites
LJ.NL Posted June 4, 2019 Report Share Posted June 4, 2019 Want!$2000+, pass Quote Link to post Share on other sites
HamletV Posted June 5, 2019 Report Share Posted June 5, 2019 2000????? I pass to they are usurers!!...2000 meehh! Quote Link to post Share on other sites
3vi1-D4n Posted September 18, 2019 Report Share Posted September 18, 2019 (edited) The Original .50 Desert Eagle scope mounts are not 20mm weavers. https://www.tapatalk.com/groups/thedeserteagle/scope-mounting-woes-t4592.html Marui sells specific Desert Eagle scope mounts back in the day... But yeah I got mine. Chrome plated hammer+trigger w/silver ceramic finish on the slide. - Its heavy, clunky, but still a little bit lighter than the .44 Desert Eagle I fired, but overall its fun. Feels on par with Guarder DE kit. - Accuracy is good stock, with modified hop rubber it is even better. - FPS is pretty standard for a 6" barrel on propane @ 360fps on 0.2g or 330fps on 0.25g . - Kick is nice, "slow" but heavy. Its not really a double-tapping type of deal, more a long range huntin' pistol. - Gas efficiency isn't great, but will finish a mag and a half or so. Chopping recoil springs by 20% will increase that to 2 and a half mags per charge, increase kick and decrease impact on the outer barrel. Fun gun, if I do go tactical with it then it would be Vest mounted w/SAPI plate, possibly in a Cmdr or TL loadout so I don't have to carry an MP7/MP9/Mini UZI or P90. Edited September 18, 2019 by 3vi1-D4n 1 1 Quote Link to post Share on other sites
renegadecow Posted September 20, 2019 Report Share Posted September 20, 2019 Decided to finally deepen the grooves on mine and while waiting for the touch up paint to dry I find out pretty much nothing will fit anyway unless I cut a 3rd groove in the middle. Quote Link to post Share on other sites
3vi1-D4n Posted September 21, 2019 Report Share Posted September 21, 2019 https://www.airsoftguns-europe.com/mount-rings-30mm-desert-eagle-tokyo-marui Quote Link to post Share on other sites
renegadecow Posted September 21, 2019 Report Share Posted September 21, 2019 My NCStar handgun scope will probably go in with its rings but that stays on my XP-100. Ended up getting these: https://www.aliexpress.com/item/33024191796.html?spm=a2g0s.9042311.0.0.3c3c4c4dtLO2Zs Quote Link to post Share on other sites
3vi1-D4n Posted September 23, 2019 Report Share Posted September 23, 2019 Why is that you don't trim the scope mount depth instead? Better than modifying something thats replaceable than something that is hard to source. Quote Link to post Share on other sites
renegadecow Posted September 23, 2019 Report Share Posted September 23, 2019 I guess I could but just don't like the idea of modifying the optic base in case I end up deciding to sell it. At this point I think I'd just wait for KYA to stock L6 barrels. Quote Link to post Share on other sites
HamletV Posted September 27, 2019 Report Share Posted September 27, 2019 On 9/17/2019 at 6:05 PM, 3vi1-D4n said: The Original .50 Desert Eagle scope mounts are not 20mm weavers. https://www.tapatalk.com/groups/thedeserteagle/scope-mounting-woes-t4592.html Marui sells specific Desert Eagle scope mounts back in the day... But yeah I got mine. Chrome plated hammer+trigger w/silver ceramic finish on the slide. - Its heavy, clunky, but still a little bit lighter than the .44 Desert Eagle I fired, but overall its fun. Feels on par with Guarder DE kit. - Accuracy is good stock, with modified hop rubber it is even better. - FPS is pretty standard for a 6" barrel on propane @ 360fps on 0.2g or 330fps on 0.25g . - Kick is nice, "slow" but heavy. Its not really a double-tapping type of deal, more a long range huntin' pistol. - Gas efficiency isn't great, but will finish a mag and a half or so. Chopping recoil springs by 20% will increase that to 2 and a half mags per charge, increase kick and decrease impact on the outer barrel. Fun gun, if I do go tactical with it then it would be Vest mounted w/SAPI plate, possibly in a Cmdr or TL loadout so I don't have to carry an MP7/MP9/Mini UZI or P90. Chopping the recoil springs by 20%? Maybe will help to protect the outer barrel from breaking, in my deagle happen that!. Did you find any issue with that mode so far? Quote Link to post Share on other sites
HamletV Posted September 30, 2019 Report Share Posted September 30, 2019 Omg look: pre-order soon Quote Link to post Share on other sites
NonEx Posted September 30, 2019 Report Share Posted September 30, 2019 Already up for pre-order on KY Airsoft. Check the news thread. Quote Link to post Share on other sites
HamletV Posted October 1, 2019 Report Share Posted October 1, 2019 Maybe I only will purchase the l6 outer barrel for my weegle, hoping that wont broke again Quote Link to post Share on other sites
HamletV Posted April 20, 2020 Report Share Posted April 20, 2020 Any one has any issue with the outer barrel? I'm trying to some company make a steel outer barrel or something Quote Link to post Share on other sites
Cesare Posted August 1, 2020 Report Share Posted August 1, 2020 Can anyone tell me the diameter of the muzzle on the WE desert eagle? Quote Link to post Share on other sites
NonEx Posted August 1, 2020 Report Share Posted August 1, 2020 (edited) Kind of difficult to get a good reading since it has a faint fake rifling path inside the muzzle and it is also beveled and flared at the end. It does not have any inside threading for adapters/suppressors like most other WE pistols. But inside with the fake rifling I got 10.4mm - 10.7mm and at the very end of the muzzle it's 10.85mm - 11.25mm 😛 Edited August 1, 2020 by NonEx 1 Quote Link to post Share on other sites
HamletV Posted August 3, 2020 Report Share Posted August 3, 2020 Guys, there's two new upgrades for the we deagle: A 10 inch barrel kit (biohazard) http://www.armorerworks.com/airsoft/kits/pistol-kits/10-de-conversion-kit-aluminium.html And a co2 magazine: http://www.armorerworks.com/airsoft/magazines/cybergun-desert-eagle-50ae-co2-magazine-black.html Quote Link to post Share on other sites
Cesare Posted August 5, 2020 Report Share Posted August 5, 2020 Thanx Nonex! I knew I could rely on a ultra correct answer from you : )So basically the muzzle indicates that the caliber should be closest to .44MagI wonder if one could file down and repunch .44 instead of .50 ....(I know this is a lot of work for little reward with high risk of poor result, but still) Quote Link to post Share on other sites
renegadecow Posted August 5, 2020 Report Share Posted August 5, 2020 (edited) FWIW Desert Eagle uses polygonal rifling and has a small crown. What WE did is the bore at the crown is closer to .50AE at 12mm (using calipers so a proper bore gauge may read 12.5mm) then it tapers down to the undersized fake conventional rifling. Would be easier to ream out the fake rifling smooth as polygonal rifling is hard to perceive anyway. Edited August 5, 2020 by renegadecow 1 Quote Link to post Share on other sites
HamletV Posted August 5, 2020 Report Share Posted August 5, 2020 11 hours ago, Cesare said: Thanx Nonex! I knew I could rely on a ultra correct answer from you : ) So basically the muzzle indicates that the caliber should be closest to .44Mag I wonder if one could file down and repunch .44 instead of .50 .... (I know this is a lot of work for little reward with high risk of poor result, but still) It doesn't worth it if you have the black one, it will exposed the silver... For my part, I have been trying to contact the manufacturers to create another outer/inner and hp chamber with a more efficient design and improve that great defect that ends up breaking, but nobody is interested apparently ... Quote Link to post Share on other sites
HamletV Posted August 5, 2020 Report Share Posted August 5, 2020 The WE DESERT EAGLE 10" barrel Quote Link to post Share on other sites
renegadecow Posted August 6, 2020 Report Share Posted August 6, 2020 12 hours ago, HamletV said: For my part, I have been trying to contact the manufacturers to create another outer/inner and hp chamber with a more efficient design and improve that great defect that ends up breaking, but nobody is interested apparently ... Given the number of rounds needed for it to break and the few instances it's at least been reported, they probably don't think it necessary to redesign. Quote Link to post Share on other sites
HamletV Posted August 6, 2020 Report Share Posted August 6, 2020 5 hours ago, renegadecow said: Given the number of rounds needed for it to break and the few instances it's at least been reported, they probably don't think it necessary to redesign. They should know that the design with the materials used are not strong enough!, and with the new co2 magazine?...it will blow up! Quote Link to post Share on other sites
Cesare Posted August 6, 2020 Report Share Posted August 6, 2020 But what a recoil : ) Almost worth itIs it the hopup house that blows up? Quote Link to post Share on other sites
HamletV Posted August 6, 2020 Report Share Posted August 6, 2020 It could blow the bb nozzle or maybe the slide,...But surely the outer barrel will get be damage Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.