TheFull9 Posted February 16, 2018 Author Report Share Posted February 16, 2018 Finally got around to picking up one of these after picking up a different TMC mask a while back which had mesh/fabric on the sides but still had the bloody wire mesh in there too (though you couldn't tell that from the thumbnail). Nothing amazing quality wise, it's mass produced chinese gear, but probably the best option on the market right now. Also this set, but I'll put it in to a great big new-gear layout picture in a few weeks. Link to post Share on other sites
VLTORfan78 Posted February 24, 2018 Report Share Posted February 24, 2018 This is what I got from Evike Thursday 1x Umarex Legends Smoke Wagon Shells - Set of 61x Evike.com 12"x14" Padded Double Pistol Handgun Carrying Case (Color: OD Green)1x Spare KWA KP45 / USP Full Size Airsoft Gas blowback magazine (NS2 System)1x NcStar / VISM 28" Deluxe Dual Compartment Subgun / SBR Padded Carrying Bag / Case - OD Green Link to post Share on other sites
TheFull9 Posted March 4, 2018 Author Report Share Posted March 4, 2018 Went around begging after SHOT, got some bits and pieces in for reviews and some swag to give out for the lads in work. Link to post Share on other sites
Katotaka Posted March 9, 2018 Report Share Posted March 9, 2018 got this baby from china spring powered, impact release hand grenade the 3 shovel shaped things swing out in a release, throwing BBs everywhere filling port on the bottom NOTE: airsoft is practically banned in PRC, this thing is marketed as a water polymer sphere toy always wanted a pair, more like fashion in the field than they have actual use for me, couldn't justify the dollars but these are on sale in a local store, BAM! got this: for this: Link to post Share on other sites
Wingmann Posted March 9, 2018 Report Share Posted March 9, 2018 A friend liked my G&G RK74-E, so I sold it to him. Then I bought the RK74 CQB Link to post Share on other sites
TheFull9 Posted March 11, 2018 Author Report Share Posted March 11, 2018 Remember folks, posts should have pics as stipulated in the OP: Around the middle of last year I decided in my own head that Crye would have to come out with the G4 uniforms soon so I started saving for all the G3s I wanted in case they stopped production. Then later in the year I had it confirmed the G4 was coming, so I made an investment. Link to post Share on other sites
Wingmann Posted March 12, 2018 Report Share Posted March 12, 2018 A friend liked my G&G RK74-E, so I sold it to him. Then I bought the RK74 CQB Link to post Share on other sites
Ivan le Fou Posted March 12, 2018 Report Share Posted March 12, 2018 Some FMA stuff for mah buhckit'. Link to post Share on other sites
hardboiledcop Posted April 3, 2018 Report Share Posted April 3, 2018 How is the RK74 line? friend of mine has the ARP9 and it's a great little shooter, lovely trigger response etc (obv has a mosfet which helps) but I'm looking for an ak platform really. Link to post Share on other sites
Wingmann Posted April 3, 2018 Report Share Posted April 3, 2018 How is the RK74 line? friend of mine has the ARP9 and it's a great little shooter, lovely trigger response etc (obv has a mosfet which helps) but I'm looking for an ak platform really. I like them. They have several things I was looking for in a modern AK platform: - Lightweight. - Piccatiny and Keymod space. - Hinged cover. - Adjustable M4 tube stock. - Modern selector with the index lip in the middle. - Good space for batteries. - Excellent G&G Ifrit 25k motor. You have to check if they indeed have these motors in. One of them came with a 18k and Powair6 offered me an SHS torque at discount. - Rubberized magwell spacer for easy insertion of the mags that also keeps them very tight. - Ambi charging handle. Useful for hop adjustment. - Extended mag release. - Compatible with Guarder Blue Box AK magazines. They insert beautifully, don't rattle and they have 155rd capacity. They are also lighter than the originals (of which I have six). - Micro switch trigger and basic electronics. I haven't had any problem with this, but some brutes have managed to break them. If you know how to squeeze a trigger they are no problem. LiPo ready. I could have gone E&L and modify it in the same way, but why? It would end up being heavier, but not better. There are some things that require little modifications though: - The selector is not very positive in semi. It can be solved by taking it off and bending it a little so it really goes into the indentations. - Cover button might rattle in when shooting, making the cover to pop open. I took the button out and dremeled a thin tunnel so it locks on the cover. - The screw for the stock tube was loose on both guns. Torque. Link to post Share on other sites
renegadecow Posted April 5, 2018 Report Share Posted April 5, 2018 Russian canned goods Link to post Share on other sites
Wingman Posted April 13, 2018 Report Share Posted April 13, 2018 WE ISSC M22 CO2 Version. I've always wanted a more modern model of a supressed .22 and I finally picked this up and I'm very pleased with the purchase. About a half inch shorter than the G18's I've built but it also takes the KJW G23/18 magazines perfectly. Surprisingly, the WE hop-up was was actually effective right out of the box and after a minor adjustment, was throwing .23's down range quite well. Very well made and very solid. Barely any rattle. Trigger is a bit heavier than my other G models, but not too bad. Has a nice short re-set that is both tactile and audible. Now to find a proper supressor. Link to post Share on other sites
Cannonfodder80 Posted April 20, 2018 Report Share Posted April 20, 2018 JG SL8 + 3 mags arrived today from Taiwangun.com just in time for Sunday. Me happy, the Mrs not so much https://i.imgur.com/aR5s9ez.jpg Link to post Share on other sites
TheFull9 Posted May 20, 2018 Author Report Share Posted May 20, 2018 Couple more things and I think I'll be done buying AOR... Link to post Share on other sites
icolater Posted May 21, 2018 Report Share Posted May 21, 2018 Just got four new kjw co2 mags for my mafioso 1911s, probably the best airsoft 1911s ever made IMO. Also just finished building my nova lapd's (two identical builds) the new version with "advanced inner frame". So I'm s happy camper ATM. Got five top of the line kimbers to drool over. Link to post Share on other sites
renegadecow Posted May 31, 2018 Report Share Posted May 31, 2018 Got me this and my first ever set of multicam ACU off AliExpress which looks so bad I don't even want to show it. Link to post Share on other sites
DrAlexanderTobacco Posted June 3, 2018 Report Share Posted June 3, 2018 LCT RPK74M! First AK. Cleaning rod rattles a lot which is annoying, I'll probably keep it off the gun. Link to post Share on other sites
TheFull9 Posted June 3, 2018 Author Report Share Posted June 3, 2018 Few layers of tape in the right places, usually sorts that kinda thing. Link to post Share on other sites
TheFull9 Posted June 4, 2018 Author Report Share Posted June 4, 2018 Had to wait bloody ages for this one. Probably the longest wait I've had on a new purchase (though lazy people who take money for custom work then don't do said work have been worse). Link to post Share on other sites
Gunmane Posted June 6, 2018 Report Share Posted June 6, 2018 Having a LCT RPK, I can say that the rod is too short for it to stay normally. I attached bits of something from another replica to get it to stay on mine, but yeah, it isn't proper length. Make sure the bloody two screws holding the receiver are not stripped already, as I found out one of mine was sadly. Anyways, from a box sitting outside my door today. Tightbores for my Bizon and one of my ak74 models, with soft matching buckings, along with some .2 for chronoing and for some of my replicas that seem to like .2 more than .25. Not expecting much to change since I don't do all the popular upgrades these days, but figured it was better than trying to find room for yet another kalash. Going to see about installing it all in, might not be able to test them till gameday Sunday though. Link to post Share on other sites
scorch Posted June 7, 2018 Report Share Posted June 7, 2018 Its my little brother's birthday just after the next game day, so of course he needs some kit. Can't have him running about with mags in his pockets any more. Link to post Share on other sites
icolater Posted June 7, 2018 Report Share Posted June 7, 2018 Just bought a surefire x300u for my new VFC fns. It's only a replica version, bought it on eBay for £45 including shipping. Should take a month to come like everything I get on eBay. Link to post Share on other sites
Skarclaw Posted June 18, 2018 Report Share Posted June 18, 2018 this week's haul: - issue gpmg sling - 5x TM aa12 standard mags - miltec jungle boots - impact bfg (cheers svman!) - lipo and bb's Link to post Share on other sites
TheFull9 Posted September 28, 2018 Author Report Share Posted September 28, 2018 Last 5 months or so of stuff. Though not pictured is a new pad set for the ops-core, KAC rail panels and a bag full o' patches. Link to post Share on other sites
Huxley Posted October 3, 2018 Report Share Posted October 3, 2018 Got fed up with fogging. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.