renegadecow Report post Posted October 31, 2017 I guess. Looking more into it I'm also seeing some by Century Arms (C308) followed by complaints about how easy the tube gets bent which seizes the charging handle. Share this post Link to post Share on other sites
3vi1-D4n Report post Posted November 1, 2017 (edited) I can attest to how easy it is to bend the WE MP5 cocking tube. Also, their welding for the cocking handle isn't straight. But hey then again, my friend's 1970 G3 fell over from leaning against a chair onto concrete and the bolt seized up against the deformed receiver. It was just a millimetre but it was enough to seize the action. I took a screw driver and forced the receiver apart. I do hope that with the G3 the front sight is brazed onto the barrel like the real one since that would make it free float. And hell I also do hope that its brazed on properly and zeroed correctly unlike the HK G3s, which was often brazed on at an angle. Those drum dial sights are so bad the windage zero changes as you adjust it. Just a terrible design. Edited November 1, 2017 by 3vi1-D4n Share this post Link to post Share on other sites
NonEx Report post Posted November 1, 2017 (edited) KY Airsoft just posted preliminary shipping dates of stock to them/distributers/stores as mid-late December for the WE G3 Mid - Late December 2017 --- WE G3 (To be confirmed) Edited November 1, 2017 by NonEx Share this post Link to post Share on other sites
renegadecow Report post Posted November 1, 2017 Meanwhile, that M1A1... Share this post Link to post Share on other sites
danr Report post Posted November 1, 2017 I think that same Facebook post mentioned the same time frame for the Thompson Share this post Link to post Share on other sites
shmook Report post Posted November 1, 2017 I do hope that with the G3 the front sight is brazed onto the barrel like the real one since that would make it free float. Completely off topic, for which I apologise, but I was under the impression that while a free-floating barrel was great for RS, it's bad for accuracy in airsoft? Share this post Link to post Share on other sites
blobface Report post Posted November 1, 2017 Trying to figure out how it could be worse for airsoft in my head... the only reason it'd be bad would be if it's loose? Then again if it's loose it wouldn't matter if it was free floating, if everything was tightly fitted, I can't imagine it affecting accuracy in any meaningful way for airsoft, it's not like we have barrel harmonics. Share this post Link to post Share on other sites
shmook Report post Posted November 1, 2017 I can't remember the physics, but maybe barrel harmonics are all over the place? I remember from sniping the more barrel spacers the better Share this post Link to post Share on other sites
blobface Report post Posted November 1, 2017 Oh right in relation to the inner barrel, I was thinking the outer barrel but yeah, since the inner barrel so super thin you wouldn't want it dangling on its own the whole way. Share this post Link to post Share on other sites
shmook Report post Posted November 1, 2017 Oh right in relation to the inner barrel, I was thinking the outer barrel but yeah, since the inner barrel so super thin you wouldn't want it dangling on its own the whole way. Yeah. I may have enough misunderstood and assumed about the inner barrel! Anyway, I shall now shut up Share this post Link to post Share on other sites
NonEx Report post Posted November 1, 2017 Forgot to post this in here. 1 Share this post Link to post Share on other sites
3vi1-D4n Report post Posted November 1, 2017 Completely off topic, for which I apologise, but I was under the impression that while a free-floating barrel was great for RS, it's bad for accuracy in airsoft? It depends. Barrel whip exists for both airsoft and real steel. The harmonics and whip is dependent on length of barrel, density of material, calibre, and support. Any vibration would affect how the barrel whips during the firing cycle. The thicker the barrel, the less whipping you would have. For airsoft, you also have the added problem of having a separate inner barrel to outer barrel, which, depending on how well it is in contact with the outer barrel, can also "whip". So in airsoft you have potentially 2 harmonics in action. If the inner barrel is fully in contact with the outer barrel, then there is no inner barrel whip. However then depending on how its mounted on the receiver, or the barrel material is soft you may still get barrel whip there. (e.g. ICS M4 DMRs, great first round hit, but terrible for full auto fire). If you have a platform where the barrel is rigid and is mounted on the receiver with no undue pressures (e.g. CA SA58s), then accuracy will be fantastic. However then comes hollow outer barrels. which is a totally different story. The inner barrel has to sit in perfect alignment to the outer barrel alignment with no pressures directing the barrel off alignment. If there is pressure, the inner barrel often warped which causes a LRB effect on the projectile (off to one side). This pressure often comes from: - The hop unit being mounted in a certain way, pushing the barrel to one side (Most bolt actions: BAR, KJW, Tanaka, and most AEGs etc) - Barrel end cap fixing to the barrel and pushing it off the alignment with bore axis (Most bolt actions with bull barrels). - The spacers, as they are often spongy and not regular in size. While spacers do prevent barrel whip, the pressure it puts on the inner barrel makes accuracy consistently inconsistent. Best way to allevate inner barrel whip without spacers is either to use a really light and/or rigid inner barrel, hardened aluminium, or titanium nitride, or stainless steel. 1 Share this post Link to post Share on other sites
shmook Report post Posted November 2, 2017 Marvellous, thanks! Share this post Link to post Share on other sites
Gigueand Report post Posted November 3, 2017 As a side note, has anyone else noticed that these previews invariably take place in an office that is completely trashed? How could someone even work in that mess? G3 FTW though... Wonder how it will stack up to the LCT construction-wise. Share this post Link to post Share on other sites
renegadecow Report post Posted November 3, 2017 They do say creative minds have messy work places and WE likes to make things nobody cares to make. 3 Share this post Link to post Share on other sites
tquilha Report post Posted November 3, 2017 (edited) Kudos to WE for doing just that. Otherwise, the GBB market would be a very dull place... Also, I've been checking out zib militaria... Wood stock and handguard for G3, 69.90 euros, black, green and OD ones even cheaper. Tasty. Edited November 3, 2017 by tquilha 1 Share this post Link to post Share on other sites
Bada Bing Report post Posted November 3, 2017 Kudos to WE for doing just that. Otherwise, the GBB market would be a very dull place... Also, I've been checking out zib militaria... Wood stock and handguard for G3, 69.90 euros, black, green and OD ones even cheaper. Tasty. Hah! Me too. Share this post Link to post Share on other sites
1st Commando Report post Posted November 3, 2017 I've already ordered more parts Share this post Link to post Share on other sites
hitmanNo2 Report post Posted November 3, 2017 Been on there too. Looking at all the stuff that would definitely be illegal over here Share this post Link to post Share on other sites
Brigg Report post Posted November 3, 2017 As a side note, has anyone else noticed that these previews invariably take place in an office that is completely trashed? How could someone even work in that mess? G3 FTW though... Wonder how it will stack up to the LCT construction-wise. A clean desk is a sign of someone who doesn't do any work. 2 Share this post Link to post Share on other sites
Cannonfodder80 Report post Posted November 3, 2017 "If a cluttered desk signs a cluttered mind, of what, then, is an empty desk a sign?" - Albert Eintein 1 Share this post Link to post Share on other sites
Gunnman Report post Posted November 5, 2017 "If a cluttered desk signs a cluttered mind, of what, then, is an empty desk a sign?" - Albert Eintein A clean desk is a sign of someone who doesn't do any work. Lol I feel validated for not cleaning my workbench, thank you. Share this post Link to post Share on other sites
renegadecow Report post Posted March 28, 2018 MOTHER*fruitcage*ING RECOIL BITCHEShttps://www.facebook.com/kyairsoftgun/videos/1641857065892853/ Share this post Link to post Share on other sites
Got Wood? Report post Posted March 28, 2018 Oh it looks so good Share this post Link to post Share on other sites
DarkLite Report post Posted March 28, 2018 Another video which shows it shooting more clearly with a full magazine: https://www.facebook.com/1277925859000627/videos/1458183304308214/ Share this post Link to post Share on other sites
