VLTORfan78 Posted January 31, 2018 Report Share Posted January 31, 2018 I've had it since Jan 8th and I can't get it to work. I feel up the mag, rack the bolt and pull the trigger and nothing happens.[/size] I've been told that it might be the rocker valve or firing pin but I need to know who to fix it.Here's a short video (hope it works) that I did for a FB group but nobody seemed to help me.https://www.facebook.com/elliott.cosper/videos/1668837056506925/?comment_id=1921342121339244&reply_comment_id=1921348628005260¬if_id=1517086028316889¬if_t=group_comment Link to post Share on other sites
renegadecow Posted January 31, 2018 Report Share Posted January 31, 2018 Right, so continuing over from the other thread: It's hard to visually check if the knocker is aligned with the mag valve but to start, check if the knocker is functioning properly. With a mag out and hammer up, the knocker should protrude into the magwell. If you try to push the knocker up it should spring back down. Then try cocking the gun slowly. The knocker should stay forward for a while until the hammer is pulled down far enough to engage the valve knocker lock. Link to post Share on other sites
VLTORfan78 Posted January 31, 2018 Author Report Share Posted January 31, 2018 Here's a few pics to show what the lower looks like. Link to post Share on other sites
Got Wood? Posted January 31, 2018 Report Share Posted January 31, 2018 Return to sender as faulty? Also, dumb point, but you did check that the empty mag switch was pushed down, right? If you leave it in the up position, with a loaded mag, it will just click... Link to post Share on other sites
wildething Posted January 31, 2018 Report Share Posted January 31, 2018 Have to say if it's brand new it's under warranty stop taking it a part and take it back to shop get them to sort it. Link to post Share on other sites
NonEx Posted January 31, 2018 Report Share Posted January 31, 2018 You are aware that there is a dry firing switch on the magazine that has to be in the correct position for it to fire? EDIT: Ah, Got Wood? already mentioned this Link to post Share on other sites
Got Wood? Posted January 31, 2018 Report Share Posted January 31, 2018 It got me when I first tried my Kurtz. Was raging at my bad luck at first! Link to post Share on other sites
VLTORfan78 Posted January 31, 2018 Author Report Share Posted January 31, 2018 Yeah I've been asked this several times so that's not it I got it off of EhobbAsia.com and I live in the US it might be to expensive to send back. I did email them a few days after I got it but never heard from them. Oh and btw it worked for like 3 shots and stopped firing after that and kept just clicking after pulling the trigger. I'm aware this is a U.K. forum but if anyone is the US owns this gun I can send just the lower that way you can test it out on your upper to see what's wrong with it. That way I can save a bit on shipping too. Thanks. Link to post Share on other sites
VLTORfan78 Posted February 1, 2018 Author Report Share Posted February 1, 2018 I just figured it out. I thought you pull the lever towards you but it's the opposite so now I feel dumb lol The extra I bought (the lighter one) screw was loose on the lever so I tighten it and now it works like the other one. When it was loose as soon as I put it in the magwell it would switch off lol. Thanks for the help though guys Link to post Share on other sites
NonEx Posted February 1, 2018 Report Share Posted February 1, 2018 Thumbs up for coming back and letting us know what the problem was and admitting your stupidity I was really curious what this was about since the dry firing lever had been covered already. If things don't work flipped one way, flip it the over. But yah, I guess the loose screw screwed you over, see what I did there, hehe Link to post Share on other sites
VLTORfan78 Posted February 1, 2018 Author Report Share Posted February 1, 2018 Haha no problem I kept using the mag with the loose screw so as soon as I used the included mag it worked Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.