fnc Posted September 20, 2018 Report Share Posted September 20, 2018 Nothing can say , just look it.... .... Want more? Visit WE's facebook site... https://www.facebook.com/WE.Taitan/?fref=pb&hc_location=profile_browser Link to post Share on other sites
Got Wood? Posted September 20, 2018 Report Share Posted September 20, 2018 We need a release date stat. I want that 19x Link to post Share on other sites
Dj_komodo Posted September 20, 2018 Report Share Posted September 20, 2018 We need a HK3P version pronto. The tan version looks a bit off though Link to post Share on other sites
NonEx Posted September 20, 2018 Report Share Posted September 20, 2018 Yay But a GEN4 MOS would have been nicer 😐 Link to post Share on other sites
Got Wood? Posted September 20, 2018 Report Share Posted September 20, 2018 Surely we won’t get an HK3P version anynore? Link to post Share on other sites
NonEx Posted September 20, 2018 Report Share Posted September 20, 2018 But what about the Cybergun/Umarex official Glock license cocking this up? 😐 Or, being covered in one of them. Link to post Share on other sites
hitmanNo2 Posted September 20, 2018 Report Share Posted September 20, 2018 Well I hope they have something in the works because those trades... Link to post Share on other sites
BigAl Posted September 21, 2018 Report Share Posted September 21, 2018 At least the slides are blank and can be engraved. As for the frames time to reach for the stippling iron I reckon, at least until some enterprising soles do traded frames. ;) Link to post Share on other sites
renegadecow Posted September 21, 2018 Report Share Posted September 21, 2018 For the trades, I've noticed they're actually raised so maybe cut them off flush then have new ones laser engraved? Link to post Share on other sites
BigAl Posted September 22, 2018 Report Share Posted September 22, 2018 Yeah thats another solution though less than perfect as the proper trades should be raised too. Unless you engrave it as a negative. ie remove the material around the trades leaving the trades behind in high relief. Link to post Share on other sites
NonEx Posted September 22, 2018 Report Share Posted September 22, 2018 Let's hope this pushes Guarder over the edge to actually make aftermarket parts aimed at these and specifically the WE Glock 19 series which is completely ignored because it's not TM product based Link to post Share on other sites
Mike_West Posted September 24, 2018 Report Share Posted September 24, 2018 Hey, cool, I just found a pretty cool Syfy greeble to bolt on this thing: https://www.aliexpress.com/item/Tactical-Airsoft-air-guns-the-glock-water-cannon-is-fitted-with-CS-G17-G18-G19/32882654759.html I have no idea why someone would design such a thing, but it's interesting. Link to post Share on other sites
BigAl Posted September 25, 2018 Report Share Posted September 25, 2018 Its intended to give it the locker a Kiss Vector. Why you would want to though is another matter. Link to post Share on other sites
fnc Posted September 27, 2018 Author Report Share Posted September 27, 2018 Test firing video... Link to post Share on other sites
Wingman Posted September 27, 2018 Report Share Posted September 27, 2018 These pistols look pretty good. Wont be available in the US though (and I'd buy one or two if they were). The shooters manual of arms blows though. Who inserts a loaded magazine into a pistol and then draws the slide back to load a round/BB with their finger on the trigger!? (lol) Link to post Share on other sites
Got Wood? Posted September 27, 2018 Report Share Posted September 27, 2018 I’ve just realised there’s the potential that these frames aren’t going to work with Marui and KJW due to the ambiance slide release, which is a little gutting Link to post Share on other sites
NonEx Posted September 27, 2018 Report Share Posted September 27, 2018 And that is why, GUARDER, MUST make aftermarket parts for these, dog dangit! 😛 Link to post Share on other sites
Got Wood? Posted September 27, 2018 Report Share Posted September 27, 2018 I mean you could probably remove the new slide release and use the old style. Or metal slides just cut out a 2nd notch. But still, I’m in it for the finger grooves, or lack of Link to post Share on other sites
Zereck Posted September 27, 2018 Report Share Posted September 27, 2018 Im pretty sure the sizes are also different seeing how he shows off holstering the pistols easily(Maruis are wider and can't go into most Glock holsters). Link to post Share on other sites
Got Wood? Posted September 27, 2018 Report Share Posted September 27, 2018 I doubt they’ll differ from current sizes. Would be an awful lot more work. Marui and KJW parts will all fit and work on WE frames. It’s the blowback units and nozzles that don’t transfer Link to post Share on other sites
icolater Posted September 28, 2018 Report Share Posted September 28, 2018 On 9/27/2018 at 4:53 PM, Got Wood? said: I mean you could probably remove the new slide release and use the old style. Or metal slides just cut out a 2nd notch. But still, I’m in it for the finger grooves, or lack of Should still be ok, the gen 4 had mag release that was ambi, only differance is the mag have an extra cut out on the right side Link to post Share on other sites
Katotaka Posted October 8, 2018 Report Share Posted October 8, 2018 AFAIK all gen 5 models have take down position (maybe also some pins) like previous gen G19's these... are not for the holster issue, dude showed using a safariland 5199 hoslter (for 17/22) which is not very picky about sizes IMO if he used a weapon light model ALS holster, locked and removed the gun WITHOUT a light I would be impressed Link to post Share on other sites
NonEx Posted October 8, 2018 Report Share Posted October 8, 2018 15 hours ago, Katotaka said: AFAIK all gen 5 models have take down position (maybe also some pins) like previous gen G19's these... are not ... What? Link to post Share on other sites
Katotaka Posted October 9, 2018 Report Share Posted October 9, 2018 8 hours ago, NonEx said: What? What? Link to post Share on other sites
Got Wood? Posted October 9, 2018 Report Share Posted October 9, 2018 All the pins and takedown lever look to be in the same place as all the previous models? Maintain think they’re located differently on the genuine article, and makes little sense to do so as I believe Gen5 is more aesthetic than function design changes. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.