Rubi-Tong Posted April 24, 2020 Report Share Posted April 24, 2020 It’s basically a G17 Gen5 frame without the crescent cut out as you’ve previously mentioned but a short rail to fit the G19 slide. Or in other words a G19x but with the flared magwell as the 17 gen5. Link to post Share on other sites
Rubi-Tong Posted April 24, 2020 Report Share Posted April 24, 2020 Easier to show a picture lol Link to post Share on other sites
NonEx Posted April 29, 2020 Report Share Posted April 29, 2020 Well, go see for yourself as KY just posted that those two models are next to be released 😛 No pics of the G45 MOS yet though. And the 19X MOS is not "correct". Wait... As per your reference and RS pics, their 19X MOS is basically the Glock 45 MOS Don't forget they usually release these with custom markings shortly after WE OEM release if you want to hold out for that. You can also talk to KY Airsoft directly on FB Messenger for further customization and Cerakote etc. https://www.kyairsoft.com/guns/we-pistols-gbbp/we-g-series/g19/we-g19x-gen5-mos-bk.html?fbclid=IwAR0xDqIeEMVDV40bfonjzkznokSev_oMiyuK2rjjAmLNXUtCcIcn69rOwqU https://www.kyairsoft.com/guns/we-pistols-gbbp/we-g-series/g19/ky-custom-g45-gbb-pistol-we-g19x-mos-modify-version.html?fbclid=IwAR3iwtoNmJ8mm0-ss2qNTUNKw8Pj0S8YYWeJ47BJsx6FA7hfKy01i6zqapk If nothing else I would think you can custom build one by asking KY Airsoft to mix and match upper/lower parts for you to get a correct G45 MOS. Link to post Share on other sites
NonEx Posted May 6, 2020 Report Share Posted May 6, 2020 WE and KY Airsoft posted updates today. All models should be out and available now. I will start discussions with KY Airsoft for a custom Glock 19 GEN5 MOS for myself! Link to post Share on other sites
Rubi-Tong Posted May 11, 2020 Report Share Posted May 11, 2020 The 19X is hopefully due later this week (fingers crossed) Bought the Gen5 17 MOS too, that'll be another 2-3week wait😭 Really hope the plates are real steel compatible, I want to mount the Shield MOS plate and an RMS dot. So low, even co-witnesses with standard sights😁 Link to post Share on other sites
johny_blaze Posted May 27, 2020 Report Share Posted May 27, 2020 I just ordered a 19 gen5 mos from KY and than I noticed that they sell mos specific magazines with a different router. How compatible do you think normal mags will be?Sent from my ANE-LX1 using Tapatalk Link to post Share on other sites
NonEx Posted May 27, 2020 Report Share Posted May 27, 2020 From what I have been told only the gas route rubber is different. KY Airsoft sell them separately. https://www.kyairsoft.com/magazine-bbs/armorer-works-magazine/vx-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html Install that on any WE Glock compatible mag and it should be good to go in a WE Glock MOS pistol. I do wonder though if the feed lip part is different as well but I don't think so. Let me see if I can double check with KY on that. Link to post Share on other sites
NonEx Posted June 2, 2020 Report Share Posted June 2, 2020 I got confirmation from KY that you only need to replace the gas route rubber with the above item to make normal Glock magazines work in the MOS series. Link to post Share on other sites
johny_blaze Posted June 2, 2020 Report Share Posted June 2, 2020 Thanks. And I'll have more time to get them as KY has messed up my order and shipped it off to Belgium and now I'm waiting for them to resend it...Sent from my ANE-LX1 using Tapatalk Link to post Share on other sites
Dj_komodo Posted September 17, 2020 Report Share Posted September 17, 2020 Got this from KYAirosft today Link to post Share on other sites
Mike_West Posted September 17, 2020 Report Share Posted September 17, 2020 Oooh, pretty! What's the light/laser thing in the front? Link to post Share on other sites
Dj_komodo Posted September 17, 2020 Report Share Posted September 17, 2020 Its a inforce APLc clone:) Link to post Share on other sites
blobface Posted September 17, 2020 Report Share Posted September 17, 2020 On 5/11/2020 at 7:43 PM, Rubi-Tong said: The 19X is hopefully due later this week (fingers crossed) Bought the Gen5 17 MOS too, that'll be another 2-3week wait😭 Really hope the plates are real steel compatible, I want to mount the Shield MOS plate and an RMS dot. So low, even co-witnesses with standard sights😁 Like this..? This is the VFC x ALC steel slide version, but using Shield SMS instead of RMS or SMS2.0, but same mounting footprint. Had to copy ALC's RMR plate and get my own plate CNC'd as there's no aftermarket options 😕 FWIW though the SMS / RMS aren't actually co-witness so to speak, but more similar to 1/3 you'd find on rifle optics. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.