Jump to content
fnc

WE G series MOS full house

Recommended Posts

It’s basically a G17 Gen5 frame without the  crescent cut out as you’ve previously mentioned but a short rail to fit the G19 slide. Or in other words a G19x but with the flared magwell as the 17 gen5.

Share this post


Link to post
Share on other sites

Well, go see for yourself as KY just posted that those two models are next to be released 😛

No pics of the G45 MOS yet though.

And the 19X MOS is not "correct".

Wait... As per your reference and RS pics, their 19X MOS is basically the Glock 45 MOS :o

Don't forget they usually release these with custom markings shortly after WE OEM release if you want to hold out for that. You can also talk to KY Airsoft directly on FB Messenger for further customization and Cerakote etc.

 

https://www.kyairsoft.com/guns/we-pistols-gbbp/we-g-series/g19/we-g19x-gen5-mos-bk.html?fbclid=IwAR0xDqIeEMVDV40bfonjzkznokSev_oMiyuK2rjjAmLNXUtCcIcn69rOwqU

 

https://www.kyairsoft.com/guns/we-pistols-gbbp/we-g-series/g19/ky-custom-g45-gbb-pistol-we-g19x-mos-modify-version.html?fbclid=IwAR3iwtoNmJ8mm0-ss2qNTUNKw8Pj0S8YYWeJ47BJsx6FA7hfKy01i6zqapk

If nothing else I would think you can custom build one by asking KY Airsoft to mix and match upper/lower parts for you to get a correct G45 MOS.

 

  • Like 1

Share this post


Link to post
Share on other sites

WE and KY Airsoft posted updates today. All models should be out and available now.

I will start discussions with KY Airsoft for a custom Glock 19 GEN5 MOS for myself! :)

 

Edited by NonEx
  • Like 1

Share this post


Link to post
Share on other sites

The 19X is hopefully due later this week (fingers crossed) 

Bought the Gen5 17 MOS too, that'll be another 2-3week wait😭

Really hope the plates are real steel compatible, I want to mount the Shield MOS plate and an RMS dot. So low, even co-witnesses with standard sights😁

Screenshot_20200430_183239.jpg

Share this post


Link to post
Share on other sites

I just ordered a 19 gen5 mos from KY and than I noticed that they sell mos specific magazines with a different router. How compatible do you think normal mags will be?

Sent from my ANE-LX1 using Tapatalk

Share this post


Link to post
Share on other sites

From what I have been told only the gas route rubber is different. KY Airsoft sell them separately.

https://www.kyairsoft.com/magazine-bbs/armorer-works-magazine/vx-series/aw-custom-vx7-vx9-rmr-slide-gase-magazine-rubber-gas-route.html

Install that on any WE Glock compatible mag and it should be good to go in a WE Glock MOS pistol. I do wonder though if the feed lip part is different as well but I don't think so.

Let me see if I can double check with KY on that.

  • Like 1

Share this post


Link to post
Share on other sites

I got confirmation from KY that you only need to replace the gas route rubber with the above item to make normal Glock magazines work in the MOS series.

  • Like 1

Share this post


Link to post
Share on other sites

Thanks. And I'll have more time to get them as KY has messed up my order and shipped it off to Belgium and now I'm waiting for them to resend it...

Sent from my ANE-LX1 using Tapatalk

Share this post


Link to post
Share on other sites
On 5/11/2020 at 7:43 PM, Rubi-Tong said:

The 19X is hopefully due later this week (fingers crossed) 

Bought the Gen5 17 MOS too, that'll be another 2-3week wait😭

Really hope the plates are real steel compatible, I want to mount the Shield MOS plate and an RMS dot. So low, even co-witnesses with standard sights😁

 

Like this..? ;)

MVIMG-20200917-154457.jpg

This is the VFC x ALC steel slide version, but using Shield SMS instead of RMS or SMS2.0, but same mounting footprint. Had to copy ALC's RMR plate and get my own plate CNC'd as there's no aftermarket options 😕 FWIW though the SMS / RMS aren't actually co-witness so to speak, but more similar to 1/3 you'd find on rifle optics. 

Edited by blobface

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.