Jump to content

Steel CAW HK69


blobface

Recommended Posts

So a while ago I put all of my airsoft stuff (and most of my belongings) into storage, many months later after the home renovation was done, this happened to my CAW HK69. 

MVIMG-20190103-093638-(1).jpg

Naturally the next thing to do was the 3D print a replacement: 

Parts.jpg

MVIMG-20190104-085509.jpg

Top: CAW version glued back together, bottom, sparkly blue test prints

MVIMG-20190108-090236.jpg

After the fitment was okay, it was time to get bits CNC'ed in steel 

WeChat-%E5%9C%96%E7%89%87-20190123140406

Having ordered a few correct diameter steel tubes, they were sent to @junglejim LCs Engineering to fit, machine and assemble.

MVIMG-20190801-145845.jpg

As always, Jim did an amazing job on the lathe machining and putting the parts together, fitted with real steel iron sights, here's a little preview of it unfinished next to a two tone stainless steel USP-9. 

MVIMG-20200317-154528.jpg

It was time to get the correct finish, after many places turned me down, finally a place was able to parkerise the parts for me, giving it a slight grey finish. 

MVIMG-20200317-160926.jpg

MVIMG-20200317-160953.jpg

MVIMG-20200317-161231.jpg

Very happy with the results, weighing in at 2.5kg+, it's very close to the real thing. The final steps to take are likely going to be engraving the lower with trades, and also making a rs stock fit somehow. 

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.