clmwrx Posted June 27, 2005 Report Share Posted June 27, 2005 does it creak when you cock the shotgun/m203? lol you love tm shotguns dont you Link to post Share on other sites
rhino Posted June 27, 2005 Report Share Posted June 27, 2005 It creaks a bit, but then again, i don't have the barrels aimed at me do i? And yup, i like my shotguns (Marui or otherwise) Only reason i got the TM M203 instead of the SP launcher was mainly due to lack of funds (what with ArnieGeddon looming on the horizon) Not bad though considering the whole package only set me back £125 posted Link to post Share on other sites
clmwrx Posted June 27, 2005 Report Share Posted June 27, 2005 i was thinking about getting one but im going to wait till my b-day and get the sp and a metal body it would stink if you cocked the m203 and it snapped the gun Link to post Share on other sites
rhino Posted June 27, 2005 Report Share Posted June 27, 2005 Well i've test fired 16 shells in it so far and the rifle's holding up fine. Just wanted one for those "He's using der trees!" moments. Link to post Share on other sites
FartSnatcher Posted June 27, 2005 Report Share Posted June 27, 2005 Well i've test fired 16 shells in it so far and the rifle's holding up fine. Just wanted one for those "He's using der trees!" moments. <{POST_SNAPBACK}> You got yourself a nice M16A1+M203 combo right there rhino. Mods are cool. Link to post Share on other sites
rhino Posted June 27, 2005 Report Share Posted June 27, 2005 You got yourself a nice M16A1+M203 combo right there rhino. Mods are cool. <{POST_SNAPBACK}> Cheers Best thing was, i wasn't planning on buying another AEG. It just happened to be a good deal. Link to post Share on other sites
clmwrx Posted June 27, 2005 Report Share Posted June 27, 2005 i was seriously going to buy a tm launcher but im going to be patient Link to post Share on other sites
FartSnatcher Posted June 27, 2005 Report Share Posted June 27, 2005 Do you guys know if you can put a Tokyo Marui M203 for M16 can go on a Classic Army M15A4 Rifle? Because it would look hella tight with it on there. Link to post Share on other sites
clmwrx Posted June 27, 2005 Report Share Posted June 27, 2005 hey someone with a sp m203 can you shoot a paper target and take a pic for me plz and tell what shell you used Link to post Share on other sites
oRb Posted June 28, 2005 Report Share Posted June 28, 2005 (edited) One Picture of my M727! Nearly everything G&P only + Real Tube, Stock & Quadrant Sight! 1700mah 9,6V Battery is stored inside the upper handguard. Best oRb Edited June 28, 2005 by oRb Link to post Share on other sites
project_jam Posted June 28, 2005 Report Share Posted June 28, 2005 with the m4a1 do you need a specialised hand grip for the m203? or do you hang it from the barrel? thnx in advance JAM Link to post Share on other sites
jkool725 Posted June 28, 2005 Report Share Posted June 28, 2005 You just remove the bottom handguard and attatch it to the barrel. Link to post Share on other sites
project_jam Posted June 28, 2005 Report Share Posted June 28, 2005 You just remove the bottom handguard and attatch it to the barrel. <{POST_SNAPBACK}> cool thnx wen i get one i shall post here lol would i need to reinforce the barrel? JAM Link to post Share on other sites
Terror Of Heaven Posted June 29, 2005 Report Share Posted June 29, 2005 You will probably get away with it if it is the TM one, I have used a TM one on a standard TM barrel and it was nasty. Overall it will probably be better to. Link to post Share on other sites
Marshmallow Monster Posted July 25, 2005 Report Share Posted July 25, 2005 I'm thinking about getting a Classic Army M15A4 Rifle basic package from Airsoft GI. But before I do (Wednesday or Thursday whenever I hear from PayPal about the AK47 rip off deal) I want to see what it looks like with an M203 kit on it. Only M16's thought please, no M4's. Thanks guys! By the way, I searched and found the other M203 picture thread, but there were only 2 M16203's in there, and one was open so I couldn't see it's real look, and the other was a TM, was up againts a wall, and was in a really bad quality pic lol. Link to post Share on other sites
davedawg123 Posted July 25, 2005 Report Share Posted July 25, 2005 Look through the armalite picture thread and your weapon picture thread (a little bit longer to look through), I believe they have some there. I am also in a similiar position like yourself, I own the m15a4 rifle and would love to add an m203 to worsen my back condition. The m203 kits I've seen seem to be of three types (most of the pictures I've seen were on m4's, fewer on m16's): 1. RIS mount 2. Barrel mount 3. RIS mount with heat shield Personally, I think the barrel mount option looks a little odd, being that the only upper handguard remains and there is a gap between it and the m203 exposing the barrel. http://www.airsplat.com/Items/AC-UPE-CA-A103M.htm The RIS mount with heat shield looks badass but I'm guessing it would cost an arm and leg and I am sure they fit m16 models. I'm not sure if anyone else beside SP sells them. http://www.airsoft-guide.com/default.asp?view=69&ad=2 The option I am considering is attaching some cheapo rails to the barrel and possibly getting a CA m203 long RIS version. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...gory=31681&rd=1 Still a little pricey, but a bit cheaper than barrel mount version, at least from what I've seen. Still, it might look funny with the rails I'm considering buying as they would slope down on the barrel: http://thehuntersmall.com/arm16haweras.html This is the cheapest set of rails I could find. It is said to be a standard weaver rail set and not a picattiny set like what RIS is supposed to be, but I've heard that picattiny accessories (like the RIS m203) will work on the weaver set but not the other way around. And if you want a more expensive handguard replacement RIS set: http://www.airsplat.com/Items/AC-UPE-CA-AO60M.htm And if you can spare that much cash, then surely you can send me some too. Dave Link to post Share on other sites
18X-ray Posted July 25, 2005 Author Report Share Posted July 25, 2005 you obviously didnt search cause i made a thread about a month ago Link to post Share on other sites
skyler8158 Posted July 25, 2005 Report Share Posted July 25, 2005 Just a heads up: The heat sheild version attaches via a barrel mount, NOT RIS. Link to post Share on other sites
Marshmallow Monster Posted July 25, 2005 Report Share Posted July 25, 2005 you obviously didnt search cause i made a thread about a month ago <{POST_SNAPBACK}> if you would have read the original post then you would have found out why I made this There were only 2 pics of the heatshield version in there, one was open, so it didn't look right, and the other was on a TM and was a very poor quality pic. Link to post Share on other sites
davedawg123 Posted July 25, 2005 Report Share Posted July 25, 2005 (edited) Just a heads up: The heat sheild version attaches via a barrel mount, NOT RIS. <{POST_SNAPBACK}> Oops Silly me. I meant barrel mount set, not RIS. Don't know why I put RIS. Maybe because I want one. Ah well. Edited July 25, 2005 by davedawg123 Link to post Share on other sites
Bert Posted July 25, 2005 Report Share Posted July 25, 2005 you should specify the heat shield in the topic description or something. i too would like to see more heatshielded M203 pics. Link to post Share on other sites
Marshmallow Monster Posted July 25, 2005 Report Share Posted July 25, 2005 I didn't know there were others you could put on an M16 other than the heat shield version. So I just put M16 M203, hoping people would know the difference between an M16 and M4 lol. I can't edit the post now though, thats the one thing I don't care for about the way this forum is set up, after about 2 hours you can no longer edit your post. But anyway, different topic for a different time. Link to post Share on other sites
Major_Payne Posted July 25, 2005 Report Share Posted July 25, 2005 btw G&P release the heat shield handguard for their m203 series Link to post Share on other sites
clmwrx Posted July 25, 2005 Report Share Posted July 25, 2005 he said m16 m203....and there is like only 2 launchers meant for the m16 its not that hard to find out Link to post Share on other sites
Bert Posted July 25, 2005 Report Share Posted July 25, 2005 he said m16 m203....and there is like only 2 launchers meant for the m16 its not that hard to find out <{POST_SNAPBACK}> apparently it is, because i can see a few guys suddenly talking about RIS and such. Link to post Share on other sites
Recommended Posts