Jump to content

Recommended Posts

I offer software for the 2018 project for Airsoft, Paintball sports. In DOMINATOR, the project replaces pen and paper with a physical device that uses access cards (RFID) to initialize the team that took the point and then start the stopwatch for that team.
Description:
  • Device - DOMINATOR contains control microcontroller (Arduino Uno, Nano, or Mega 2560).
  • The display shows the time of each team (RED and GRE team.)
  • Each team member is equipped with a card or keypad that communicates at 13.56MHz. Keychains can be differentiated in color (blue, red ...)
  • If a team manages to score a point, any player on that team will place his card on the reader. The team's LED (red / blue) lights up at this station and the team's time is added.
  • If a second team occupies a point and puts a card on that team member's LED, the team's LED lights up, the second team's time is paused, and the team that occupied the point counts.
  • If the organizer (referee) puts the card / key, both times shall be discarded until one of the teams has placed the card.
  • The last possible card in the system is the use of so-called. eraser card that pauses and resets both times.
  • The maximum time range of the system is: 99 hours 59 minutes 59 seconds, also suitable for events and sports facilities.
  • The system is tested, functional, works smoothly, the ability to measure and display time even for tenths of a second.
 
The RC522 reader operates at a frequency of 13.56MHz, RFID tags registers at about 3 centimeters (almost physical contact with the reader is necessary), compatible tag format ISO / IEC 14443 A. There is a version equivalent for DOMINATOR with a button input that replaces the RFID reader. Therefore, in this version, there are four buttons instead of four types of cards. For the RFID version, there is a PCB design for production by photo path or from GERBER files. The PCB is double-sided with overlays.
u9Wz2zb.png
WaECtc7.png
 
Both versions are delivered free of charge to RFID DOMINATOR. PCB design is not available for the button version. Button version of DOMINATOR can be tried for free in the Shareware version. The version limitation is only in functionality, where it is possible to run DOMINATOR to measure a maximum time of 15 seconds for each team. During this time it is possible to verify the response of the system to the inputs, the behavior of the system. The shareware version is in machine code .hex, which must be uploaded via AVRDUDE software to Arduino. There are versions for I2C address converter 0x3F and 0x27. Contact by e-mail to request a machine code.
 
Used Hardware:
  • Arduino Uno / Nano / Mega (the scheme for each microcontroller is the same)
  • RFID RC522 running at 13.56MHz
  • 2x LED
  • LCD display 16x2 / 20x4 with I2C converter
  • compatible cards and key fobs
 
 
Price of software: 30 € RFID version / 20€ button version
Contact in ENGLISH language please.
Payment method: PayPal
 
Video of how it works - RFID:
https://www.youtube.com/watch?v=H7FHSLeyXVU
Video of how it works - Button:
https://www.youtube.com/watch?v=KN6RXZYUcI4
proxy.php?image=https%3A%2F%2Fi.imgur.co
Wiring - RFID DOMINATOR:
g5ufkBO.png
Wiring - Button DOMINATOR:
D9KcneX.png
Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.