Jump to content

Star's New M14 SOPMOD AEG reviewed


Recommended Posts

I was interested in this gun as soon as the word was out that Star/Guarder were developing one, so when they became available (albeit in very limited numbers, only in Japan) I jumped at the chance to get hold of one. The only place I could find that had them in stock was Echigoya International over in Japan; hence that was my port of call. I sold my Minimi, placed an order and after some phone calls and faxes to sort it out, the postman delivered my parcel, eager to know himself what was inside…

The Sopmod is now available from Zero one airsoft in the UK (cheaper than what I paid for mine, but what you gonna do…)

 

First impressions…

 

DSCF2551.jpg

 

Upon opening the cardboard box, I realised why shipping was so expensive, included with the gun is a rather large aluminium effect rifle case. (Now swapped to a plain black plastic one in the current release)

It seems that Star have now started shipping all there AEG’s with case of similar design. I had no need for the case, as I already own several other storage cases and bags but never the less it is a nice storage solution and completes the package nicely. Be warned though the case weighs about 4.5kg and so really bumps up the postage costs when shipping from Japan etc.

 

There is no manual included in the box, which is annoying, instead the complete set of instructions and the take down diagram is available from www.starairsoft.com on the Sopmod M14 page.

 

Upon opening the case I took my first look at the rifle itself. It’s very nicely finished and looks the part. Externally it is neat and clean, no sign of unsightly seam lines etc. and the whole thing looks good.

It lacks the correct Troy Industries logo or text, which on the real steel rifle are engraved on the cocking handle plate, but does have US RIFLE, 7.62mm M14, SA 56756 laser engraved behind the rear sight.

 

DSCF2553.jpg

 

The rifle itself…

 

Picking up the rifle, you realise it’s heavy… roughly weighing in at 4.6kg it weighs less than a Minimi, but more than most off the shelve rifles. It is not something you’ll want to carry round all day without a break.

 

• The main stock is made from what appears to be a heavy weight nylon fibre reinforced ABS, the surface is an even satin dark grey (almost black) colour with a dimpling texture very similar to the look of the real Sopmod. The pistol grip is very similar and has a nice firm rubbery texture to it, allowing for a good hold.

 

• The folding stock is mainly steel, with a rubber butt pad and fake leather effect adjustable cheek pad. The joint between body and stock appears to be made from cast aluminium with the catch smoothly locking the stock firmly in position. There is some wobble to the stock, about that of the sliding stock on the Marui MP5 series. The cheek pad can be raised and lowered by undoing a screw wheel located on the front of the butt plate, allowing the cheek pad to be adjusted to suit the user, and utilise either the iron sights or a mounted scope.

 

Note: the cheek pad must be raised quite high to clear the back of the main receiver when folding the stock in.

 

• The main receiver, complete outer barrel, cocking handle, trigger guard, mag release section, expansion chamber, flashider and gas block are all metal. I think there aluminium but I can’t say for certain. They are neatly cast with a smooth even dark grey (look a like parkerised finish) colour to them. One point of discussion is whether the cocking handle was fixed or not… it is fixed and thus non moveable, as is the ejection port cover. This may bother those who aim for realistic M14 replica, like those from G&G or Marui.

 

• The flashider is threaded in two places, the gas expansion block (on the real thing) can be unscrewed and the flashider itself is also removable from the gas block. Both are 14mm negative threads and so those who want to fit a silencer can easily do so. With the gas expansion block removed and the inner barrel sticks out slightly from the outer barrel by about 1.5 inch.

The inner barrel fitted for those who want to know is 420mm long, and finishes about 2 inch short of the end of the flashider, so you can fit a slightly longer barrel if required.

 

• The upper heat shield is supposedly made from carbon fibre. I have yet to establish whether this is true, it feels more flexible than normal ABS plastic, but does not look anything special.

 

The Sopmod has RIS rails, lot’s to be precise. All rails are metal and firmly attached. The top rail is a whacking 380mm long, the bottom 210mm and the two side rails both 110mm. There’s easily enough room for anything you can imagine (within reason).

I chose to mount a reflex sight on top, a vertical grip below and possibly a torch on the side. Mounting too much though will raise the weight on an already heavy rifle…

The Sopmod only has a rear iron sight, no front sight so I would say an optic of some sort is a good idea, I went with the Guarder Red Dot Reflex sight, a good easy to sight with, choice. I believe the lack of a proper front sight is true to the real steel rifle though as well.

 

Gearbox wise, it’s a new design, supposedly compatible with marui gears and pistons, should you need to do repairs or go for higher FPS. The motor is different to most standard ones, in that the shaft of the motor is far longer that of say the AK, G36C or similar so finding a replacement may prove very difficult should the motor fail.

 

DSCF2555.jpg

 

The safety is on the trigger guard, in front of the trigger as on all M14 rifles, forward to fire, and back to engage the safety.

For those who wondered whether or not the Sopmod was select fire… it is Not, there is no selector switch. The rifle is SAFE and AUTOMATIC only…

 

The real world M14 Sopmod is based around the semi auto variants of the M14 and so has no external selector switch, so equally the Star version does not.

 

Trigger pull is light but long, especially long for an AEG. Some have said the trigger is much like that of the AUG or P90, in that half pull is semi and full back is auto, I have not found this to be the case. You can quickly pull and release the trigger to fire a single round quite easily, but really it is just full auto only.

If you had intents of making a sharp shooter out of this rifle, you will be disappointed.

 

Rate of fire with a 9.6v battery (recommended) is pretty high, higher than a stock G36C or CA M15 series with the same 9.6 battery. The magazine does not last long at all.

 

DSCF2554.jpg

 

The mags are folded steel and nicely finished, they each hold 90 rounds standard and are not the same as the G&G or Marui ones, and are definitely not compatible. They are however the same (exactly the same) as the previous Airsoft Club Custom M14 AEG rifles mags. Therefore those with a AC m14 will be able to use there own mags and those who need spare mags can purchase the AC ones from Den Trinity or Tokyo Model Company still (until Star releases new mags).

Zero One in the UK now have the high cap mags (470rnds) listed at £24.99 each.

 

Locking the mag in also take some practice as it has to be tilted forward to clear the magwell and then angled back (straight) to lock in place. I imagine this to be the same with the G&G and Marui M14’s also, as it is the way the real steel mags are fitted.

 

Firing the gun…

 

The first time loading and firing the gun, the mag did not feed smoothly, and dry fired several times. That said a good squirt of silicon oil and a good working through has loosened the mag follower and from there on, it has fed flawlessly.

 

Power wise I have had not had a chance to chrono it, nor test it with the coke can FPS test, but it fires harder than a stock Marui rifle, I would guess at a push around 350fps give or take. Zero One have the stock FPS quoted as high as 400fps but I do not believe mine is firing that “hot”.

 

Hop up is adjusted via a grub screw through a gap within the top RIS rail and is based off the APS style hop up unit, whatever that means (I have not had it apart that far to examine as of yet). The hop was easy to set though and seems to hold position well.

 

There is no fuse on this gun either, despite the fact there is plenty of room to have included one. Perhaps as the Sopmod is designed to utilise a more powerful battery ideally (9.6v is suitable) they chose to forego the fuse system.

 

DSCF2552.jpg

 

The biggest problem encountered is the battery placement. There is plenty of room for a battery (the whole front section of the fibre stock part is hollow enough to fit a largish battery, easily one of the newer G&P 1100mah 9.6v batteries) but getting the battery in and out is tiresome.

To insert the battery the way you are supposed to (according to the manual) you undo the hex screw below the gas fake gas regulator, this then swings out the way and allows you to slot in a battery. This is ok in theory but in practice, especially in the field this would prove to be difficult, and would most likely end in you loosing the hex screw.

If the screw is not replaced (tightly holding the fake gas regulator in place) the whole outer barrel can wobble and could throw off your aim.

 

There are two alternatives, you can use a PEQ2 battery box, which I do when I need a larger capacity battery, or you can permanently fix the battery into the battery space and just leave the connector sticking out, meaning you have to charge the battery in place. This works when, like me you fire small amount each game, but not for those who like to spray away.

 

Summation…

 

I love the look of the Sopmod M14, whether you agree or not, is personal taste. Those who like the clean look of the original M14 rifle will probably not like the new Sopmod, those who like tactical looking modern weapons will probably love it.

 

The price is still higher than most AEG’s (around £400 with the case and battery), but you get a lot for your money, full fibre reinforced plastic and metal construction.

 

If you want select fire and quick change batteries, this is not for you. The difficulty in battery changes (for those spray and pray fans) and lack of presently available locap mags (for those realistic gamers) limits the appeal of the Sopmod, while having no semi setting means no casual sniping…

 

If you want a heavy weight, full metal and fibre rifle, that feels strong and has no body flex, something that will set you apart from the other M4A1 Sopmod and special forces rifles, then the M14 Sopmod is for you.

 

Pros…

• Unique rifle, will set you apart from the crowd

• Full metal and fibre plastic, with practically no flex or creaking

• Plenty of rails to mount accessories

• Large battery space for custom batteries

• High rate of fire and approx 330 fps out of the box.

 

Cons…

• Battery is difficult to change

• No semi auto setting

• Mags are limited to high caps at present

• Lack of replacement motor etc.

• Lack of correct trademarks

• Higher up front cost

Edited by matt bond
Link to post
Share on other sites
  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

That is one of the most beautiful rifles I have ever seen. Looks nothing like an m14, though. Too bad its auto only... I mean its a rifle! Why have all that barrel length if you can't take sniper-esque single shots? :)

 

Do they actually make RS versions of that rifle?

Link to post
Share on other sites

do they make real steel versions?

 

yes they do.

that is essentially why the STAR/SOPMOD M14 got delayed - STAR/Guarder ran into trouble with TROY, who make the real steel mod for M-14's over copyright infringements.

i dont know how it was sorted, but it looks like the hurdle got cleared..

if it hadnt been for the copyright issues, the gun wouldve been out a while back..well before the Marui anyway.

 

other popular mods of the M14 in us military use is the Sage EBR version of the M14, which retains the long length of the original barrel.

 

relevant links:

 

http://www.troyind.com/gallery.htm

http://www.troyind.com/sopmod_m14.htm

 

sopmods_sm.jpg

closed.jpg

 

'in use' photos:

http://securityarms.com/sale/newfirearms/s...cture%20001.jpg

http://securityarms.com/sale/newfirearms/s...cture%20006.jpg

http://securityarms.com/sale/newfirearms/s...cture%20035.jpg

http://www.defensereview.com/1_31_2004/Picture%20027.jpg

 

Sage EBR:

http://www.defensereview.com/modules.php?n...article&sid=712

m1a_scout_ebrb.JPG

 

http://www.25idl.army.mil/articles/bigphot...3182005_032.jpg

http://www.fulton-armory.com/Mark14RightSide-1000_50.jpg

http://cache.gettyimages.com/comp/52240562...757C85AE85A779B

http://media.militaryphotos.net/photos/alb...4/aaa.sized.jpg

 

sorry for the Sage EBR overload..!

 

and hijack.. :o

Edited by oikoik
Link to post
Share on other sites
Very informative review, +1 for you.

Do you know if there are any other changes to the SOPMOD with the current release?

 

 

Thanks for the positive comments, I'm gonna take some more close up pics of the battery area, etc. as soon as i can.

 

As far as i know there are no other changes in the current release that differ from mine.

They were originally release back on 22nd June at Echigoya (don't know about anywhere else) but after some use and feedback from the staff there, they were apparently recalled by Star for fine tuning etc. So i'm guessing the one i got (a 2nd release one) is exactly the same as the ones now coming out at Zero one etc.

 

*This information came from phone calls with Shane at Echigoya.*

 

 

One thing i did forgot to mention though, is there are no sling points on this gun... so you'll have to rig something up for yourself to carry it.

 

Too bad its auto only... I mean its a rifle! Why have all that barrel length if you can't take sniper-esque single shots?

 

Rumour had it there were going to be semi auto only and full auto only Sopmod's released but to date there has been no sign of the semi auto one, so i guess we'll have to see on that one.

Link to post
Share on other sites
Very good review matey, just got my today, but hasnt had the chance to try it out yet, cant wait thus, as it look very nice indeed... :)  :)  :)  :)

 

 

Agreed it's one of the best looking and most solid guns i have handled in quite a while. I have still to use it for a proper game, but test firing etc. i have had no probs so far.

 

Post your views on it when you've had a chance to try it out properly... the more the merrier.

Link to post
Share on other sites
i found adjusting the hop a bit odd - i cant tell if i have grip on it or not..

 

and its 'fookin' 'eavy... [eg. not a lightweight weapon..]

 

atm i cant tell if the gun is shredding bbs or whatever im shootin at is...

 

 

Agreed on the heavy comment, the only thing rifle i've had that was heavier in weight was a para minimi... the Sopmod is rather front heavy though, especially with the stock retracted.

 

I found that the hop up is very easy to turn, although once set, i haven't noticed any slipping from where it was set.

Link to post
Share on other sites

hmmm i cant tell if i'm engaging it or not..

 

yeah, reminds me weight-wise of my top m60...

 

its pretty heavy to shoulder for long periods [i know, i'm a pen[or mouse]-pushing wimp..]..

 

incidentally, zero one provide a printed hardcopy version of the Star online manual..

 

other points:

the rear sight appears to be a dummy, and the screw was loose on it as well.

 

the outer barrel can sometimes work itself loose - you can just twist it back, and then *probably* tighten the grub screw under the heatshield to secure it again.

 

the heat shield appears to be normal abs its certainly flimsy, but has metal nuts for the top rail to secure into which is nice.

 

ASC M14 mags, as matt bond said, fit - both hi-caps and lo-caps.

the whole issue of inserting mags, and keeping them inserted, is a bit annoying - you really have to spend time in making sure the mags are in properly - no quick changes here.. unless you don't mind the mag dropping out at an inopportune moment..

mag insertion is actually easier for all the mags on the ASC M14..

 

occasionally a slap helped the SOPMOD M14, and you're rewarded with a tiny 'click' sound, but other times you just have to fiddle with the mag to see if its in securely or not..

Edited by oikoik
Link to post
Share on other sites
other points:

the rear sight appears to be a dummy, and the screw was loose on it as well.

 

the outer barrel can sometimes work itself loose - you can just twist it back, and then *probably* tighten the grub screw under the heatshield to secure it again.

 

the heat shield appears to be normal abs  its certainly flimsy, but has metal nuts for the top rail to secure into which is nice.

 

 

Oikoik is correct the rear sight is pretty much there for show. This is not a gun on which iron sights are really a useful option, a scope (red dot works best) is really needed.

 

I have not had a problem with my outer barrel working loose, although mine appeared to have thread lock or something similiar also securing it around the grub screw/joint when it arrived.

As i no longer use the normal battery compartment (use a PEQ) i have now put a dab of superglue where the fake gas regulator meets the outer barrel. Barrel wobble is now zero, as long as the gas regulator part is screwed in tightly.

 

Agreed on the heatshield, as said above it does not look like Carbon fibre as was described in the posters etc.

Although it has a slight flex to the plastic, it seems to hold up quite well, especially as the long top rail reinforces it.

 

Placed the order - your review pushed me over the edge! 8D

 

another has given in to the Sopmod temptation :D

Edited by matt bond
Link to post
Share on other sites

ok had a chance to try the gun out proper, and here my view...

 

for the look of the gun 10/10, FPS alots better than all my other guns, build quality very good.

 

now the things i didnt like, Fixed cocking handle, ejection port cover, battery compartment ( why :angry: why :angry: why make it so difficult to change battery???? :angry::angry: ), no sling point, folding stock catch button very hard on my, i though it was jam, when i couldnt release the catch to adjust the stock.

 

still i love it as much as the TM M14, now which one should i use more.....hehe :D:D:D:D

Link to post
Share on other sites

was yours stock spring, or taken down to 1j or the m100? - if from zero one that is - i dont know who else stocks this.

 

production was supposed to have stopped sometime ago..

 

for the look of the gun 10/10, build quality very good.

amen - star/guarder have done a good job here.

 

now the things i didnt like, Fixed cocking handle, ejection port cover, battery compartment, no sling point, folding stock catch button very hard on my, i though it was jam, when i couldnt release the catch to adjust the stock.

agreed - i like working parts on my replicas - even better if theyre functional in some way [like on gbb's]..

no sling point is indeed a neg - ive seen a fair amount of different ways of doing it.

i dont have the right sling right now, but i'm looping mine around the strongest parts of the gun[and not just using RIS sling points as i couldve easily done]

 

the sliding stock catch is very tough.

the best position i found was right hand on grip, thumb up, weapon pointing muzzle down, left hand to bring out the stock.

to retract i find it easier with same position above, weapon muzzle down, depress catch and the stock slides down smoothly under its own weight.

 

i have the wood M14 and i'm more inclined to use the SOPMOD as a general all-rounder..

 

in addition, unlike the M4, with the stock in its retracted position i find the SOPMOD uncomfortable to hold in the firing position [because of the bulky stock/pad/screw assembly] - pull it out a little and its better..

Edited by oikoik
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.