Raygis LasVegas Posted November 2, 2005 Report Share Posted November 2, 2005 I recently bought a G&P conversion kit for the Maruzen CA870 shotgun. How do I remove the stock Maruzen pump and install the G&P one? Link to post Share on other sites
flint Posted November 2, 2005 Report Share Posted November 2, 2005 http://honolulu888.com/ca870cqb.html This link breaks it down really well. It's not bad but watch for the little spring from the hopup. Link to post Share on other sites
Raygis LasVegas Posted November 2, 2005 Author Report Share Posted November 2, 2005 http://honolulu888.com/ca870cqb.html This link breaks it down really well. It's not bad but watch for the little spring from the hopup. <{POST_SNAPBACK}> The stock handguard pump is connected to the cocking arm. I want to change the pump to a G&P pump. I still need to use the stock cocking arm. How do I remove the plastic pump from the metal cocking arm inorder for me to install a G&P pump? Link to post Share on other sites
flint Posted November 2, 2005 Report Share Posted November 2, 2005 I was stumped at that point too. Guess I am not much help there. I was afraid I would break it so I didn't force it. Link to post Share on other sites
sp00n Posted November 2, 2005 Report Share Posted November 2, 2005 Take off the shell tube, then hold the cocking-rods with one hand (its best to leave the barrel on for this part, and hold the barrel with the rods for some support), and force the grip straight down with the other. It takes alot of force, but it'll come off. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.