Wehrmacht54 Posted November 4, 2006 Report Share Posted November 4, 2006 Wait...WHAT THE *fruitcage*? Why the hell did you put a guarder kit on a VFC AK, and the guarder kit doesnt even have the correct handguards. Link to post Share on other sites
Yeager Posted November 4, 2006 Report Share Posted November 4, 2006 Wait...WHAT THE *fruitcage*? Why the hell did you put a guarder kit on a VFC AK, and the guarder kit doesnt even have the correct handguards. <{POST_SNAPBACK}> me thinks its because its Gucci? Link to post Share on other sites
1cem4n Posted November 5, 2006 Report Share Posted November 5, 2006 my gun is over 1k but my Bipod is REALLY ugly so i dont' know if i want to buy a new one. some *beep* spraypainted mine without my permission. will paint thinner get it off? Link to post Share on other sites
Victory Posted November 5, 2006 Report Share Posted November 5, 2006 Almost finished. Next step is to machine a RealSteel upper for it. Systema PTW MAX M16A4 w/M4 outer steel barrel Samurai SIR Samurai flipup RS PRI gasblokk RS Eotech 552 RS Surefire M951C RS vertical frontgrep RS Magwell RS Magpul stock with electronics inside 7.4v LI-PO batteri inside the sling. http://www.airsoft-tromso.com/albums/Vaape...horty.sized.jpg <{POST_SNAPBACK}> Wow...very impressive...very, very impressive. +1 -Vic Link to post Share on other sites
Yeager Posted November 5, 2006 Report Share Posted November 5, 2006 (edited) TOP M-60E3 Shorty (DX? its practically full metal) Real steel tray cover Custom milled feed tray (replaces worm screw thing) Custom feed system (M249 tube style) Custom Electric Box Magazine (6,400 or so rounds) Real M-60 ammo pouch Chrome inert 7.62s Piston setup 9.6v aug battery Edited November 5, 2006 by Yeager Link to post Share on other sites
scooberoo Posted November 6, 2006 Report Share Posted November 6, 2006 some of you may laugh. . but I have at least $1k worth of hours invested into my Custom H&K SP89. : I wouldn't actually pay 1K USD for a gun like that. Link to post Share on other sites
1cem4n Posted November 6, 2006 Report Share Posted November 6, 2006 (edited) my counter-sniper: +1s are welcome Edited November 6, 2006 by 1cem4n Link to post Share on other sites
SlvrDragon50 Posted November 6, 2006 Report Share Posted November 6, 2006 my counter-sniper: +1s are welcome <{POST_SNAPBACK}> Dude.. My gun looks just like that except i have an ICS receiver and a G&P AP and a different silencer.. poo Link to post Share on other sites
1cem4n Posted November 6, 2006 Report Share Posted November 6, 2006 whats a G&P AP? mine is a G&P SPR/A with all sorts of internal parts and external parts. Link to post Share on other sites
0nslaught Posted November 6, 2006 Report Share Posted November 6, 2006 G&P aimpoint Link to post Share on other sites
jordan2139 Posted November 6, 2006 Report Share Posted November 6, 2006 You have a G&P Aimpoint of a Sr-25?? Link to post Share on other sites
the cleaner Posted November 6, 2006 Report Share Posted November 6, 2006 I wouldn't actually pay 1K USD for a gun like that. <{POST_SNAPBACK}> probably not. .but you also probably have no appreciation or understanding of the amt of work required to make a realistic HK SP89 either. Many airsoft gunsmiths have tried it. . and all they come up with is a MP5k w/ SP89 forend. Not even close to what a real SP89 looks like. This is the ONLY airsoft version that is dead on to it's steel counterpart. Link to post Share on other sites
Batou-san Posted November 6, 2006 Report Share Posted November 6, 2006 I think your sp89 looks absolutely fabulous, nice work. Link to post Share on other sites
Kyrian_Zenda Posted November 6, 2006 Report Share Posted November 6, 2006 Same here, vod, don't listen to that burke. Nice work Link to post Share on other sites
Shard Posted November 6, 2006 Report Share Posted November 6, 2006 (edited) This is the ONLY airsoft version that is dead on to it's steel counterpart.Not quite, what you need to do is get rid of the "Made In Japan" now Just messing, it's still very nice Edited November 6, 2006 by Shard Link to post Share on other sites
the cleaner Posted November 6, 2006 Report Share Posted November 6, 2006 Not quite, what you need to do is get rid of the "Made In Japan" now Just messing, it's still very nice <{POST_SNAPBACK}> LOL. . that's possible. .if I can get ahold of what the real one says. .I can make a mold of the stamping. . .cast it and replace the "Made in Japan". (too much work) but hey. .I DID get rid of the ASGK on the MC51 lower receiver. . Link to post Share on other sites
TerranCmdr Posted November 6, 2006 Report Share Posted November 6, 2006 Dude.. My gun looks just like that except i have an ICS receiver and a G&P AP and a different silencer.. poo <{POST_SNAPBACK}> So, in other words, it doesn't look just like that. Link to post Share on other sites
n00bTard Posted November 7, 2006 Report Share Posted November 7, 2006 It's been posted before, but I've made some major updates/changes, so here it is again: Link to post Share on other sites
the cleaner Posted November 27, 2006 Report Share Posted November 27, 2006 here's my old Geneth WA2000. .sold it about 1.5 yrs ago. . still have the $450 scope package though. #196 of 300 made Link to post Share on other sites
the cleaner Posted November 27, 2006 Report Share Posted November 27, 2006 my baby. .. Shoei MG42. .I have a basket drum too. . fitting some M249 box mag guts into it. . (I borrowed the pics from Gregor aka SCAAR. . my digicam was stashed away during my move. .can't find it) Link to post Share on other sites
poorieuser Posted November 27, 2006 Report Share Posted November 27, 2006 What that set you back? Link to post Share on other sites
Skarclaw Posted November 27, 2006 Report Share Posted November 27, 2006 I wouldn't actually pay 1K USD for a gun like that. <{POST_SNAPBACK}> How much did your aimpoint mount cost for a generic m4? Link to post Share on other sites
Crandall Posted November 27, 2006 Report Share Posted November 27, 2006 How much did your aimpoint mount cost for a generic m4? <{POST_SNAPBACK}> Doesn't he have a stupidly expensive Wilcox mount? Link to post Share on other sites
Thorbard Posted November 27, 2006 Report Share Posted November 27, 2006 I wouldn't actually pay 1K USD for a gun like that. <{POST_SNAPBACK}> Neither would I, but that doesn't mean I dont appreciate the ammount of effort it took. There are certainly a few in this thread that I would. I may be joining this club myself if I can find the money to do what I want with the M15 that I just bought. Link to post Share on other sites
aclark79 Posted November 28, 2006 Report Share Posted November 28, 2006 Link to post Share on other sites
Recommended Posts