Jump to content

Recommended Posts

23006a85.jpg

 

9977482c.jpg

 

d12ee9f6.jpg

 

Maruzen APS-2 SV, bought from a guy on another forum, who bought it from flint here on Arnie's, who got it on eBay from another guy who got it somewhere else. I think I'm owner #4, but 2 of the 4 only used it once or twice, and I ended up getting it a lot cheaper than 1K since it's used. But this was probably around $1000 total new...

 

Maruzen APS-2 SV $265

Mojji Hornet II scope $238

Zero trigger $130

First Factory PSS2 reciever $135

Maruzen Bipod $61

 

That's not even factoring in internal upgrades, and that's up to $830, so I'm sure this is worth over 1k.

Link to post
Share on other sites
  • Replies 645
  • Created
  • Last Reply

Top Posters In This Topic

Sorry I accidently post while making the post

 

Thats my M4, worth over 2k, lots of upgrade, everything that should be metal on the real deal, is metal on this baby.

Oustide

-TM M4A1

-Systema M4 metal body

-G&P steel accesories kit

-G&P Ready mag system

-Systema one piece outter barrel

-TH ops silencer

-Km tight bore Barrel

-Guarder Anpeq2

-Guarder Aimpoint

-Guarder I aimpoint mount

-Blackhawk Tactical sling

-Surefire 6P Tactical flashlight

-KAC vertical grip

-Modified Marui RIS

-Custom Low resistance wiring

-Gaurder reinforced Pistol grip

-Systema high speed motor

-Custom cut down carry handle sight

-12 marui lowcap mags modified to hold 33 rounds each

-1 Marui high cap mag

Inside

-Systema reinforced gearbox shell

-Systema High speed gear

-Top Power 190 spring

-Systema oiless bushing

-Systema anti reversal latch

-Top power piston

- Custom made vented piston Head

 

Thats about what I can think of right now....

To come probably the Ace Socom stock or sell to whole thing and buy the systema PTW M4 and start over again....

post-12051-1133036540_thumb.jpg

Edited by SEALsone
Link to post
Share on other sites

Sniper config

 

DSC00702.JPG

DSC00703.JPG

DSC00708.jpg

DSC00716.JPG

 

Gunner config

 

DSC00322.JPG

DSC00295.JPG

 

Lets start at the beginning

 

Tokyo Marui m4-s

G&P short midcaps

Prometheus max torque gear set

Area 1000 full cylinder (psg1+ length barrel to come)

Systema High Grade motor

Classic Army full stock

Wiring has been run to the back

9.6v large type battery with deans/ and matched cells (will be upgraded to 12v or 10.8 soon)

Polished bolt cover (no purpose except aesthetics)

King Arms 3.5-10x40 m3 scope w/ 90mm extender

King arms bipod w/ spring retract legs (bipod mount was drilled into the SIR by using just the nub from an m14 bipod mount kit)

King Arms pistol grip

Front ris grip (gunner config)

Guarder aimpoint w/ high mount (gunner config)

Hero Arms electric wind drum mag (gunner config)

Prometheus m120 (gunner config)

KM lightweight 245 silencer (will run longer barrel through this)

 

I probably missed a few things but you get the point.

Edited by dyeinbreed
Link to post
Share on other sites
I followed this thread right from the beginning... So I read page 1 ages ago, hence forgetting wht's there.. ;) . I mean you are replying to a post 6 pages before this one, a quote would be nice.. :rolleyes:

 

oh and I love Mongelo's E2 so I will protect them from you with my M1a scout....even thou that it hasn't got a pistol grip....

 

Also, LeMongelo: Is the stock walnut or birch? how is the UnCo M14? Does it perform well?accurate? How many shots can you get with one gas charge? and where is the gas stored?

 

Well I personally prefer shooting with a pistol grip. I know in airsoft it seems to make no difference, but it's just a personal preference. I just can't shoot correctly with a rifle stock. If you notice more and more sharp shooter are ditching rifle stocks for pistol grips.

 

The stock is walnut. It seemed like an intact birch, although cheaper in price, was harder to find. Most were split right down the receiver down toward the stock since I was told it could not withstand the force of full automatic fire. An intact brich seems just as rare as an intact walnut set. I really like the fact that it has a "USMC" cartouche in the right face along with the "DOD" on the left.

 

The UnCo 14 is nice. I've had it for about exactly one year now and put well above a 1000 rounds through it (although I do put much more attention to it than my other gbbs). No sign of leaks and the valve seems to be tight. The mechanism in the rifle itself is very simple and suprisingly does not have that many parts (even simpler than gbb pistols since there's just so much room in the reciever). The blowback action very nice and it makes a rather distinct sound when the bolt hits the reciever. The gas is in the magazine; one chrage fires about maybe 50 bbs (the mag only holds 20). I would personally never take it to a game since it is 1) very heavy (about the same as my E4) 2) no extra mags and 3) I'm too out of shape to play war. I'm sure this will ###### many people off but I just enjoy shooting targets in the back yard.

 

I don't like the fact that the bolt catch was fake. I'm trying to get it so the bolt will catch when the last shot is fired. Also a hop-up would be nice; I would think one can easily put one in. I also noticed the selector swtich is reversed. On semi it goes auto and on auto it goes semi. The dimensions are not quite real steel as advertised. There are small parts that I had to modify to put it together. Also, the outer barrel is kinda crappy and looks very fake compared to an M1A. Extra mags will be nice...

 

Hope this helps.

Link to post
Share on other sites
thanks,

I too prefer a pistol grip rifle...but there isn't one yet for my marui m14 and finding/importing/modding a real E2 would be really hard...

 

So the UnCo M14 seem like a really good collector item.. too bad I couldn't afford one....

 

Yeah, it's just a collector's item...fun to shoot though.

 

I too bought a Marui M14 with the hopes of fitting it with an M2A (my M1A is currently sporting one). Unfortunately, the way the motor angles into the gearbox needs to be changed drastically. If someone does come out with a DMR conversion kit, or manages to fit one to the Marui, it will be really interesting to see how they deal with the motor. Maybe the Star SWS is a better base for the mod? You have both right, are the two gear boxes very different? Can an M2A be fitted on the Star?

 

Also, there is a heavy metal rod passing right through the pistol grip on the E2.

 

Anyhow, just a few observations...

Link to post
Share on other sites
  • 2 months later...

Wow, a lot of really nice guns. Imo, spending over $500 is kinda a waste on an airgun that shoots plastic bbs, when for that price you could buy a real gun similar to the airsoft replica, but it sure does make for some very nice pieces. It's cool that you can make something that refined and special, even if a large part of it is throwing money at it :rolleyes:

 

That said, I am guilty of spending over $500, but not up to $1000 yet. I have about $700 in my Sun Project M40A1, it might make it up to $1000 after a few more mods and a better scope, then I'll post it all up on here and show off. lol. But that's a while coming though still, spending a lot on school and cars right now...

 

In the future I plan to build a totally custom aeg and a nice gas AR if I can ever get/afford them.

 

Keep up the good work on the cool guns!

Link to post
Share on other sites
  • 1 month later...

Might as well put this puppy up in the "right" spot, though it's up in the armalite thread as well.

 

dscf00047pf.th.jpg

dscf00087ga.th.jpg

 

ANGS-Impulse Asahi AR15A2 Sporter Carbine, G&P M500 (soon to have 120lumen Surefire lamp assembly), Botach AG43 grip (copy of the Fobus G27). Supposedly 1 of 500 ever done up in this fashion by ANGS

Edited by Whitedingo
Link to post
Share on other sites

Nice gun, the body looks like cast steel? I have now developed an obession that all my toys need to be made of steel if realistic. I've been after a steel armalite for some time. Too bad the country where I'm from won't let me own anything real.

 

Here's my contribution:

 

ak3rd2.jpg

 

The AKS-74

 

TM AK47

Guarder AKS-74 all steel kit

Systema M120 FTK

Prometheus barrel

G&G metal hopup

Guarder steel bolt

G&G steel trigger guard

Real Bulgarian rear sight

Bulgarian sling

STAR GP-30

 

The AKM

 

TM AKS-47 (I can't find a battery that fits in the full stock that wont wiggle around)

Guarder AKM all steel kit 2004 version

M120 upgrade (M120 bushings gears)

Systema tightbore

G&G metal hopup

Real Romanian rear sight

Romanian sling

Link to post
Share on other sites

Not this thread again :o

 

gr300ml.jpg

 

GR300

Prime LR300 ML stock

EOTech 512

Rico Tactical Flashlight

 

 

cqbr.jpg

 

Custom M4-SWAT

9mm Conversion

Systema Gears & Piston Head

Prometheus M90 Spring

G&P Aimpoint Replica

G&P Rear Sight Riser

G&G GP-6 Flashlight

SPR Grip

TDI Arms Crane Stock

 

spr.jpg

 

G&P SPR

G&P 4x32 ACOG Replica

Edited by teetee
Link to post
Share on other sites

My 3 additions to this thread :D

 

Bottom to top

 

TM M4A1 Base gun

CA KAC RAS

CA Outerbarrel

KM TN TB barrel

ICS working ANPEQ2

Quick Detach Supressor

Smokeys M4 Pistolgrip

Smokeys Recoil pad

US made Cheek pad

Systema Bushmaster Metal kit

KAC rail armor

Sun project M203 chopped

Systema metal acessory parts for M4/M16 series

Guarder M16 Trigger pin

Systema M4a1 complete gearbox

Systema High torque motor

Promethous Gold motor connectors + battery connectors

BIG OUT BOS Ver 2 SECTOR chip

NC star riser mount

Replaced the systema spring :waggle: with a lowerpowered Guarder SP90 Tuneup spring approx 300 fps

Systema black locking bodypins

Not shown:

4 AE Hi-caps

10 STAR 30 rounders

2 G&P midcaps

 

TM AK/S Base gun

Real steel Romanian sidefolder

DTP Fullstock metal body modified to replicate AK74 stamped reciver

CAW beta woodkit

Smokies super short AK front set

Guarder bell flashhider

BIG OUT BOS CHIP

G&P Selector lever

SOON to have Guarder silver non recoiling bolt

DTP frontset modified to work with a beta

classified internals

16 AWG wiring

Systema high torque motor

KM TN TB barrel

Not Shown: Tascabe Ind. PBS-5, Hero Arms drum mag, SD team Waffel 500 round hicap, Beta hicap

 

 

TM AK F/S Basegun

Guarder AKM 05 kit

Guarder AKM plastic fruniture or Modern kit

Guarder Recoiling bolt and gearbox

RPK rearsight

Guarder front sight

Promethous soft bucking

KM TN TB barrel

Tascabe Ind. PBS-5 Thin

Internals include guarder cylender, cylenderhead piston pistonhead SP90 Spring tappet plate selector plate Systema metal bushings and std helical gearset

motor is TM EG1000

 

 

dcp19498jg.jpg

Edited by M635C
Link to post
Share on other sites

b2.JPG

 

b3.JPG

 

My SV-98 russian sniper rifle, aka the "Boomstick" project, based upon a VSR G-spec

 

Don't know how much it has cost me, but i'm damn sure its more than 1k

 

Still have to replace the outer and inner barrel and buy/make a custom flashhider

Edited by WildCard
Link to post
Share on other sites
  • 3 weeks later...
  • 2 months later...

Most of the money sits in accessories...

Base G&G M4

Odd bits and ends internally

Harris 9-13 with Adapter

Trijicon ACOG TA01 with ARMS QD mount

ICS QD Silencer

GG&G M.A.D. BUIS

[i think this barely breaks the $1,000 mark if we are talking MSRP]

DSC01082.jpg

DSC01105.jpg

 

Base Marui AK

Smokeys Grip/Rail

Odd bits and ends internally

Surefire M900 with Blue Filter

EOTech 551

[This also barely breaks the $1,000 mark]

DSC02426.jpg

DSC02425.jpg

 

Base Marui M4

Hurricane Metal Body

Hogue Wraparound Grip

Real Steel Vltor Stock

Surefire M962SU with Red Filter

Dieter CQD Vertical Foregrip

G&P AN/PEQ2

Odd bits and ends internally

EOTech 551

[i miss this gun...]

Greg3.jpg

 

My current gun barely makes $900.00 <_<

Edited by Sparky2129
Link to post
Share on other sites

6ffa0c05.jpg

 

all of them cost over a grand except the bottom gun.

top m249 (crappiest 1k gun ive ever bought)

Sun project m16 with mods (close to 1k, i miss this badboy)

TM SPR (over 1k, more like 1400, not many existed in 2004, sold in 05).

GnG (ok not 1k, it was just in the photo).

 

My latest project, that went way over budget.

019040fb.jpg

Edited by mrblah
Link to post
Share on other sites
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.