budawg Posted November 29, 2006 Report Share Posted November 29, 2006 i'm thoroughly confused...where'd you get that 19? Is it real steel? I'm seeing that glock logo on the grip as well as that second pin above the main trigger spring. And is that the marui 17 on the right? Link to post Share on other sites
RSP1 Posted November 29, 2006 Report Share Posted November 29, 2006 I thought that the early KSC Glocks had it, and it was only after some sort of legal confrontation that they had to take it off. The logo, that is. I could be way off, but that's my best guess. Or perhaps Tanaka? Link to post Share on other sites
Shao14 Posted November 29, 2006 Report Share Posted November 29, 2006 i'm thoroughly confused...where'd you get that 19? Is it real steel? I'm seeing that glock logo on the grip as well as that second pin above the main trigger spring. And is that the marui 17 on the right? <{POST_SNAPBACK}> From the left: KJW G32C http://www.arniesairsoft.co.uk/reviewpost/...2/cat/17/page/1 KSC G17 (early production with full trades) http://www.arniesairsoft.co.uk/reviewpost/...2/cat/17/page/1 and yes, the one on the right is the new TM G17. Link to post Share on other sites
budawg Posted November 29, 2006 Report Share Posted November 29, 2006 duh..kjw...i was thinking that in the back of my head...how do you like the marui? Link to post Share on other sites
Shao14 Posted November 29, 2006 Report Share Posted November 29, 2006 Haven't shot it much, but so far, it is everything one can expect from recent Marui GBBs. Link to post Share on other sites
davedawg123 Posted November 29, 2006 Report Share Posted November 29, 2006 So it kicks KSC's butt? Link to post Share on other sites
Shao14 Posted November 29, 2006 Report Share Posted November 29, 2006 So it kicks KSC's butt? <{POST_SNAPBACK}> The sights, yeah. The rest seems to be about the same. (of course my KSC has metal slide, and this one has stock plastic slide, so it's hard to say.) Link to post Share on other sites
jesTer Posted November 29, 2006 Report Share Posted November 29, 2006 (edited) Here's my pretty beaten up KSC Glock 17. I just replaced the G&G GM3 torch with the King Arms M3 replica... The only mod I have on in there is a Guarder recoil spring to replace the stock one that died... Edited November 29, 2006 by jesTer Link to post Share on other sites
Elliot Posted November 29, 2006 Report Share Posted November 29, 2006 You can never have too many Glocks. Here are a few of mine. http://www.photobox.co.uk/album/album_full..._photo=86033678 Elliot. Link to post Share on other sites
tomster Posted November 29, 2006 Report Share Posted November 29, 2006 You can never have too many Glocks. Here are a few of mine. http://www.photobox.co.uk/album/album_full..._photo=86033678 Elliot. <{POST_SNAPBACK}> You need to register and log in to see your album... just FYI. Link to post Share on other sites
Elliot Posted November 30, 2006 Report Share Posted November 30, 2006 You need to register and log in to see your album... just FYI. <{POST_SNAPBACK}> Ah........######. Thanks for letting me know. Elliot. Link to post Share on other sites
drums123 Posted November 30, 2006 Report Share Posted November 30, 2006 hello from israel! Well, here we dont have much airsoft as the uk because it's not completly legal. I have no gas pistol at the moment but in the next weeks i just might get one. here is my Cyma 0.30 glock 18C AEP+STTI Glock 17 Spring in some photo's: Cyma 0.30 Glock 18C: #2: Cyma+Stti: #2: Link to post Share on other sites
canizzle Posted December 7, 2006 Report Share Posted December 7, 2006 I just watched "A Man Apart" with Vin Diesel and Larenz Tate. At the end they were using Glock 17's with suppressors. Probably the only movie I've seen glocks with suppressors. Usually I see USPs and berettas with suppressors. Link to post Share on other sites
ViciousV10s Posted December 7, 2006 Report Share Posted December 7, 2006 There's suppressed Glock in "Ronin" Link to post Share on other sites
0nslaught Posted December 8, 2006 Report Share Posted December 8, 2006 bah, should have gotten the M6X great glocks btw, and love the pictures Link to post Share on other sites
s85sss Posted December 8, 2006 Report Share Posted December 8, 2006 after reading all 76 pages,i have a question!so is it possible to install a eagle 5.5 barrel in a g17,but there are any modification to make for a smooth cycle or is just a drop in operation?guarder outer threated barrel are ok?Hope some glockmeister can help me! Link to post Share on other sites
Epoque Posted December 9, 2006 Report Share Posted December 9, 2006 (edited) Edited December 9, 2006 by Epoque Link to post Share on other sites
Arghoslent93 Posted December 9, 2006 Report Share Posted December 9, 2006 I sanded the slide down earlier this week and it was an awful job I think I preferred it when it was black Link to post Share on other sites
ViciousV10s Posted December 10, 2006 Report Share Posted December 10, 2006 (edited) after reading all 76 pages,i have a question!so is it possible to install a eagle 5.5 barrel in a g17,but there are any modification to make for a smooth cycle or is just a drop in operation?guarder outer threated barrel are ok?Hope some glockmeister can help me! <{POST_SNAPBACK}> The KSC Eagle 5.5 (170mm) inner barrel is a direct drop in for any KSC Glock. The Guarder threaded outer barrels for the 17/18C work well. It will cycle fine. ^^Arghoslent, you sanded the G&G anodized finish..it's no wonder it didnt turn out as you planned, as sanding is not the way to try to remove that kind of finish. Sorry about your slide. Edited December 10, 2006 by ViciousV10s Link to post Share on other sites
s85sss Posted December 10, 2006 Report Share Posted December 10, 2006 now the problem is find that barrel,UNco doesn't have it any more.the silver version or the normal for the threaded barrel are the same,right?I saw the cqb standoff and looks very cool,does it need modification to fit a g17 or g19?Have you seen this? (http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=20944&title=GRIP+ADAPTER+%26+MAG+WELL+for+GLOCK%7e) Link to post Share on other sites
Wai Hoong Chan Posted December 12, 2006 Report Share Posted December 12, 2006 My KSC Glock 34, metal slide and King arms M3. Upgraded recoil spring and the mag bumper from a 50 clip Link to post Share on other sites
Frontsight Posted December 14, 2006 Report Share Posted December 14, 2006 Id like to join in also. I have 3 Glocks so far, the G17,G34 and G27. I love em, but im thinking of replacing my KSC G17 with Maruis. Here is my G27 MyG34 and laser Link to post Share on other sites
JustinHR Posted December 14, 2006 Report Share Posted December 14, 2006 Very nice Glock 27! I have a quick question and figured it didn't warrant it's own thread. Who makes the best Glock 26/27? I want a really small pistol and I like the Glock26/27s the best. I don't want the full-auto verisons. Also what is the range on these small pistols(not that range is a big deal, just wondering)? Link to post Share on other sites
Carbine Posted December 15, 2006 Report Share Posted December 15, 2006 Performance wise Marui is the best. KSC is the most accurate to the real-steel. KJW is a copy of the Marui, and a pretty decent gun for the money. Link to post Share on other sites
Recommended Posts