Glock Picture Thread

[i_is_oli]

Here's mine, sorry about quality

 

[xRAZERx]

Here's half a Glock

[Butter18c]

that gun makes me want to hit my head on something very hard

[trdsupragt]

[Django]

Nice stainless slide..looks like you sanded it, right?

[rallymad_nad]

Thought I would post this up although still waiting for a Hogue grip and a Glock extended mag and slide release:

 

KWA Glock 19

Streamlight M6

Magloc Thumb Recoil Controller

Magloc Magwell

 

 

Nad

[Soloman]

Sweet!

 

Gives it a whole new look.

[Crandall]

<{POST_SNAPBACK}>

Beautiful! Nice and simple, I love polished slides on glocks!

[Yuri]

Bought a new silencer for my Glock and thought I'd post a picture

 

[Vicks]

thats what i cool a sexy silencer, and on taht glock, my god it looks good, what silencer is it exactly?

[Yuri]

Thanks a lot for the compliment! The silencet is G&G SS-100, very cheap and small.

[Chris P]

My KWA G19, the one with the metal slide. I won this one at Arniegeddon 05 for being a fugetive and holding onto my sash for 2 hours. For the majority of that 2 hours me and my brother were sat under a bush, picking off anyone who came too close

[ViciousV10s]

Base:

KSC Glock 19

 

Upgrades:

G&G metal slide

Shooter's Design CCW threaded outer barrel

KM SEALS 169mm silencer

**178mm 9Ball 6.03mm tightbore barrel**

Zenith recoil spring

Firefly rocket floating valve

Hidakaya floating valve spring

Custom floating valve retaining pin

Firefly impact hammer block (touch breech)

Hidakaya 150% hammer spring

Custom high flow mag valve (ported stock)

Custom blowback chamber springs

Hop-Up ball removed for ultimate power, accuracy, and consistancy

Guarder metal mag catch

Glock mag base plate

Hogue grip

**Tasco Optima 2000 Red Dot sight**

**FOBUS TAC telescoping Glock stock**

** Weaver Bipod**

Custom brace to allow cycling with any size/weight silencer and inner barrel

 

Power: INSANE

 

 

inner barrel

Edited July 22, 2005 by ViciousV10s

[SgtBojangles]

I suggest editting the FPS... nothing higher than 328FPS here. Sorry.

 

EDIT: PIMP Glock, BTW.

Edited July 22, 2005 by SgtBojangles

[ViciousV10s]

Thanks for the heads up Bojangles,. and thanks for the compliment

[Dervish]

Vicious oh my that pistol is simply sex on legs.

[Hero]

Bought a new silencer for my Glock and thought I'd post a picture

 

<{POST_SNAPBACK}>

 

is this easy to install? what else do i need to get other than the glock and the silencer?

[Hero]

hey guys, i am about to get either the KWA G18 or G19, and that I have a Socom silencer, 32mm Diameter, 105mm long, they have a 16mm x 1mm pitch CW thread and it can fit on a TM socom.

 

Just wondering what i need to get in order for my silencer to work on my new glock 18/19? is it possible?

 

cheers

[ViciousV10s]

Hero, you need a threaded outer barrel for your Glock.

 

The outer barrels for the 18 and 19 are not the same design on the chamber end.

 

Guarder makes CW and CCW 14mm threaded barrels for the 18, and G&G also makes a 14mm CW threaded barrel for the 18.

 

G&G makes a 14mm CW barrel for the 19

DENtrinity used to have Shooter's Design CW and CCW 14mm barrels but have not been in stock for a while now

 

I have only seen 14mm threaded barrels that are either CW or CCW, if you want to use that silencer you have you would most likely need a custom made 16mm threaded barrel made.

 

Good luck.

 

PS> G&G barrels do not cycle well, even with plastic slides. You are best off getting a Guarder threaded barrel for the 18 and buy that G&G SS100 silencer. The barrel is about 40 USD and the G&GSS100 is about 25 USD.

 

THe G&G SS100 and SS80 silencers are very good quality especially for the low cost. They even have foam inserts, I own a few.

 

 

 

 

Edited July 26, 2005 by ViciousV10s

[Hero]

i've put my silencer onto my m92f springer, and even those it doesn't have any threaded barrel, i still managed to put it on, LOL (i put the silencer on slowly and turn clockwise and its now stay)

 

anyway, do u know if the m92f has a 16 or 14mm barrel? just a normal m92f i mean. thx

[Hero]

also, where in the uk can i get a 14mm threaded barrel?

[ViciousV10s]

Im not from the UK Hero so I dont know where you can get the barrels, I order all my parts from HK stores like uncompany.com dentrinity.com and wgcshop.com

 

I dont know anything about the M92s.

[Hero]

are they easy to install? i mean the threaded barrel onto a glock18

[ViciousV10s]

are they easy to install? i mean the threaded barrel onto a glock18

<{POST_SNAPBACK}>

 

 

All you do is take off the slide, take out the recoil spring, take out the inner/outer barrels, and replace the outer barrel, probably takes about 10 seconds to do.

[LeMongelo]

PS> G&G barrels do not cycle well, even with plastic slides. You are best off getting a Guarder threaded barrel for the 18 and buy that G&G SS100 silencer. The barrel is about 40 USD and the G&GSS100 is about 25 USD.

 

Just to note...the problem with the cycling of G&G barrels is because of the way the inner barrel engages the outer. It has nothing to do with how the shape of the barrel or the material of the slide.

 

If you notice when the slide is back, the outer barrel moves backward slightly. The inner barrel gets caught against the front edge of the outer barrel. At least this was the case for my G26C.

 

Hope this helps.