r.ocelot Posted July 10, 2007 Report Share Posted July 10, 2007 Yes, no, yes. Link to post Share on other sites
Slug Pellets Posted July 10, 2007 Report Share Posted July 10, 2007 Almost everything should fit without a problem, however the recoil spring bushing may be a different shape and not fit the metal frame (this was the case when I tried to put Magna-Tech Series 70 internals in a SCW2 slide). Also I think the sights are molded to the slide on all Magna-Techs. This shouldn't matter as long as the kit comes with its own . Link to post Share on other sites
the cleaner Posted July 10, 2007 Report Share Posted July 10, 2007 FarEast. . please do tell more about the Dawson . .very unique! too bad it's a TM I know PGC use to make Dawson slides but not frames. . Link to post Share on other sites
FarEast Posted July 10, 2007 Report Share Posted July 10, 2007 I prefere the TM internals over Western Arms any day, Straight out of the box skirmishable (Is that even a word??) WA has a real bad rep here in Japan. Link to post Share on other sites
hkssr20det Posted July 10, 2007 Report Share Posted July 10, 2007 I prefere the TM internals over Western Arms any day, Straight out of the box skirmishable (Is that even a word??) WA has a real bad rep here in Japan. <{POST_SNAPBACK}> I am beggining to agree with you. WAs are proving almost more trouble than they are worth. They still shoot better (in terms of feel and power) than a TM. Once TM can figure that out fully, they will be finished. Link to post Share on other sites
FarEast Posted July 10, 2007 Report Share Posted July 10, 2007 The problem I have here is that I only really have access to HFC134a I'm currently working on a propane rig but it's proving to be a PITA to complete! Link to post Share on other sites
hardboiledcop Posted July 10, 2007 Report Share Posted July 10, 2007 I'd take a WA over TM any day of the week, even one as beautiful as that custom. For me, WA means better kick, power, realism, gas capacity.. Call me anal if you like, but a 1911 should be able to be decocked, and it shouldn't have screws, also, if there's an issue with my WA, chances are after stripping and reassembling I will know where the problem lies. TM's are a whole different ballgame for me.. Link to post Share on other sites
the cleaner Posted July 11, 2007 Report Share Posted July 11, 2007 I prefere the TM internals over Western Arms any day, Straight out of the box skirmishable (Is that even a word??) WA has a real bad rep here in Japan. <{POST_SNAPBACK}> probably because of the 1 joule rule. . and 134a. TMs cannot compare or even come close to WA Magna/R-type powered guns. I can see if you're comparing the TM to SCWs though. ( oooh. . I hate SCWs) Link to post Share on other sites
the cleaner Posted July 11, 2007 Report Share Posted July 11, 2007 I'd take a WA over TM any day of the week, even one as beautiful as that custom. For me, WA means better kick, power, realism, gas capacity.. Call me anal if you like, but a 1911 should be able to be decocked, and it shouldn't have screws, also, if there's an issue with my WA, chances are after stripping and reassembling I will know where the problem lies. TM's are a whole different ballgame for me.. <{POST_SNAPBACK}> and I will agree with HBC too. . also. . Marui M9 vs WA 92F. . no comparison in terms of realism, power, performance.. .WA only lacked in upgrades and the poorly made Sheriff kit. Link to post Share on other sites
hardboiledcop Posted July 11, 2007 Report Share Posted July 11, 2007 speaking of which.. Do you know anything of the SD M92f metal kit on Den? Link to post Share on other sites
FarEast Posted July 11, 2007 Report Share Posted July 11, 2007 and I will agree with HBC too. . also. . Marui M9 vs WA 92F. . no comparison in terms of realism, power, performance.. .WA only lacked in upgrades and the poorly made Sheriff kit. <{POST_SNAPBACK}> But look how old the Marui M9 is! It's one of thier first GBB, rather than rebuilding the internals they just threw on some other external kit. Link to post Share on other sites
ruchik Posted July 11, 2007 Report Share Posted July 11, 2007 i am seriously going insane over the lack of flat mainspring housings. someone replied over in my other thread that the TM 5.1 housing will swap over to a TM 1911, but i need one for my WA as well. is there anywhere that sells replacement mainspring housings for the WA? i really do NOT feel like shelling out 80 bucks for a prime/sheriff housing. Link to post Share on other sites
FarEast Posted July 11, 2007 Report Share Posted July 11, 2007 Here are my 1911's. Link to post Share on other sites
r.ocelot Posted July 11, 2007 Report Share Posted July 11, 2007 (edited) Far east, you gotta stop fondling that HiCapa...too many dirty fingerprints on that chromed frame Is that a NB back strap on it? Ruchik, incoming PM. Edited July 11, 2007 by r.ocelot Link to post Share on other sites
FarEast Posted July 11, 2007 Report Share Posted July 11, 2007 Far east, you gotta stop fondling that HiCapa...too many dirty fingerprints on that chromed frame <{POST_SNAPBACK}> Can't help it....she's my plinker Is that a NB back strap on it? <{POST_SNAPBACK}> Sorry not sure what you mean. Link to post Share on other sites
r.ocelot Posted July 11, 2007 Report Share Posted July 11, 2007 Nine balls main spring housing? Link to post Share on other sites
hkssr20det Posted July 11, 2007 Report Share Posted July 11, 2007 (edited) I should make myself clearer, I prefer the TM to the problematical SCW systems. In terms of M9s, there is no question the WA is far superior in every way. I do own more WAs than TMs. HBC - Did you see a SD kit in stock again? Runs to Den. Edited July 11, 2007 by hkssr20det Link to post Share on other sites
fal Posted July 11, 2007 Report Share Posted July 11, 2007 (edited) make sure to wash your hands after stroking it. Edited July 11, 2007 by fal Link to post Share on other sites
ruchik Posted July 11, 2007 Report Share Posted July 11, 2007 a while back i saw a picture of a bob chow v1 up here in this thread. does anyone know if that belt clip is removeable? Link to post Share on other sites
M14 Posted July 11, 2007 Report Share Posted July 11, 2007 My somewhat new KSC M1911A1 Full Metal. For some reason the slide looks all scratched up. Its not in real life and you can real the trades perfectly. Link to post Share on other sites
r.ocelot Posted July 11, 2007 Report Share Posted July 11, 2007 a while back i saw a picture of a bob chow v1 up here in this thread. does anyone know if that belt clip is removeable? <{POST_SNAPBACK}> remove the grips to get it off. Link to post Share on other sites
TunerGuy Posted July 11, 2007 Report Share Posted July 11, 2007 Nine balls main spring housing? <{POST_SNAPBACK}> 'Looks like the one I have, so I'd venture a 'yes'. Far East, those are great looking weapons you have there. The Dawson looks superb. I didn't catch who built it up ---you? Clarence? Link to post Share on other sites
Ingo_Sleeps Posted July 11, 2007 Report Share Posted July 11, 2007 (edited) sorry for scumming up the thread but i'm too dumb to be able to get the search to come back with any less than an entire boards worth of results. I'd like to know if the marui nineball threaded outer barrel will fit in the WE 1911, and if it doesn't is there a threaded barrel that will? Edited July 11, 2007 by Ingo_Sleeps Link to post Share on other sites
hardboiledcop Posted July 11, 2007 Report Share Posted July 11, 2007 I believe that was answered in the last couple of pages! Anyway, the answer is yes, the slide contents of the WE are the same as the TM. -- And when using the search button, make sure you "" your search, and search by thread titles only (or in specific threads). ta. Link to post Share on other sites
sturgis Posted July 11, 2007 Report Share Posted July 11, 2007 finally got a recoil rod that fits now only to fit some spacers so the silencer works with it.... Link to post Share on other sites
Recommended Posts