Captain Hat Posted August 11, 2007 Report Share Posted August 11, 2007 (edited) LOL @ Balderik and Black Adder Nice guns, I too have problems with the single stacker grip. However I can't stand 5.1 ergos either... I should try those Para-Ordonance, they look damn sexy, and a good compromise. Very nice Mk IV TGR by the way! <{POST_SNAPBACK}> Yeah, the Hi-Capas are Baldrick and Blackadder because they're not real guns, so they look a mite comedic next to the Paras. And WA Paras are gorgeous guns. You might have some trouble getting ahold of an HRT Special because IIRC they're discontinued (though I've seen a few black ones for sale, the parkarised ones seem to be a bit rare). Not sure if they still make the P-14 .45 though, and the HRT Special is essentially one of those with an ambidextrous thumb safety. P-14 .45s are still great-looking guns. Edited August 11, 2007 by Captain Hat Link to post Share on other sites
Made Posted August 11, 2007 Report Share Posted August 11, 2007 Heya guys, I'm currently reading through the entire thread (only on page 140 so far ) and I decided to post a pic of my TM 1911. Only my second GBB (had a KJ Para before). I threw a couple of Delta Elite grips on it to see how it looked and it's atleast better to hold now imho . Love the guns in this thread! Link to post Share on other sites
ViciousV10s Posted August 12, 2007 Report Share Posted August 12, 2007 (edited) nice single stack Infinity GenT... Fit a RS CDP II trigger Edited August 12, 2007 by ViciousV10s Link to post Share on other sites
charliecloud Posted August 12, 2007 Report Share Posted August 12, 2007 Something Different - Full Metal M945 - Upgraded valves,tightbore barrel,150 recoil spring. Had this for a while and decided it needed blacked out trades, looks much better Link to post Share on other sites
hkssr20det Posted August 12, 2007 Report Share Posted August 12, 2007 Very nice, SD body? Link to post Share on other sites
charliecloud Posted August 12, 2007 Report Share Posted August 12, 2007 Very nice, SD body? <{POST_SNAPBACK}> Thanks - Yep SD kit inc outer barrel & chamber. Link to post Share on other sites
dannyboy Posted August 12, 2007 Report Share Posted August 12, 2007 And it's out of stock everywhere Link to post Share on other sites
Donut Posted August 12, 2007 Report Share Posted August 12, 2007 Last pics before I pack it Link to post Share on other sites
airwolfie Posted August 12, 2007 Report Share Posted August 12, 2007 my two lovelies...... Yin and Yang, both have a bit of good and bad in them!! Still need some Novak sights for the silver one, but i had this for so long i couldn't wait anymore!!! GSR sigarms slides prime TLE/RLII frames upgraded springs on the black one(silver to come when i get more money from sales!!) haven't tried the silver one out yet as the stock springs probably won't work too well, and the sights are missing, but if it shoots like the black one( ), i'll be as happy as a pig in s***!!! what do you think, with or without the tac lights(cheap clone thingy's BTW) enjoy!! Link to post Share on other sites
Gen.T Posted August 12, 2007 Report Share Posted August 12, 2007 Very sexy. Is that there a Shooter's Design MEU slide cut for Bo-mars? The Custom logo looks like it was etched in by someone. And I assume those are Alumagrips with Gungrips custom dragon logo?? If it is, you are one lucky son of a monkey cuz they don't do clear style Alumagrips anymore <{POST_SNAPBACK}> Yep they are indeed alumagrips w/ the gungrips dragon logo, and birchm's right, its a magna SD springfield slide. Nice guns airwolfie. The TLE/RLII frames seem a bit odd with GSR slides to me but still its a cool set you got there. Link to post Share on other sites
Mathub Posted August 12, 2007 Report Share Posted August 12, 2007 Shame the dust cover doesn't match the frame. Link to post Share on other sites
Donut Posted August 12, 2007 Report Share Posted August 12, 2007 Simply because I can And quick question, how come I can get the Hi capa slide on the 1911 frame, but not vise versa? Link to post Share on other sites
hkssr20det Posted August 12, 2007 Report Share Posted August 12, 2007 It might be because of the little bit of frame that you remove to get at the blowback unit of the 1911. But I have never tried that swap before. Link to post Share on other sites
Chris North Posted August 13, 2007 Report Share Posted August 13, 2007 What grips are those, Donut? What are they made of? Link to post Share on other sites
ruchik Posted August 13, 2007 Report Share Posted August 13, 2007 (edited) I thought you needed some kind of slide spacer to get a Hi-Capa slide to fit onto a 1911? *edit: I would imagine those are custom made wood grips. Edited August 13, 2007 by ruchik Link to post Share on other sites
Donut Posted August 13, 2007 Report Share Posted August 13, 2007 What grips are those, Donut? What are they made of? <{POST_SNAPBACK}> Donut Custom Works? I think someone gave my project that name a while back I think they're Oak, or maybe Ash. Those are the two types of wood I usually use. I thought you needed some kind of slide spacer to get a Hi-Capa slide to fit onto a 1911? <{POST_SNAPBACK}> No, it went on just fine, fired fine as well, though you have to use the 1911 slide catch, the Hi capa catch doesn't work Link to post Share on other sites
r.ocelot Posted August 13, 2007 Report Share Posted August 13, 2007 (edited) Donut Custom Works? I think someone gave my project that name a while back <{POST_SNAPBACK}> That would be yours truely Stole the idea from WA, Shibuya Custom Works. I call my stuff Ocelot Custom Works Edited August 13, 2007 by r.ocelot Link to post Share on other sites
Donut Posted August 13, 2007 Report Share Posted August 13, 2007 That would be yours truely Stole the idea from WA, Shibuya Custom Works. I call my stuff Ocelot Custom Works <{POST_SNAPBACK}> Ah, now I remember. Well, I think I'll take it, I'm going to stick that on to all my projects now Link to post Share on other sites
ruchik Posted August 13, 2007 Report Share Posted August 13, 2007 Does D.C.W do commisions? Link to post Share on other sites
Fin Posted August 13, 2007 Report Share Posted August 13, 2007 Looking at all these sexy guns is tempting me to make a beauty but i also fancy a worn, weather and used one. I had a pic of one before but lost it, anyone else got one (just a weathered standard 1911)? Link to post Share on other sites
the cleaner Posted August 13, 2007 Report Share Posted August 13, 2007 Thanks - Yep SD kit inc outer barrel & chamber. <{POST_SNAPBACK}> very very nice. . something you don't see very often . . .but it would've impressed me more if you had the full metal ZEKE M945 Compact kit in silver or gold! Link to post Share on other sites
Mathub Posted August 13, 2007 Report Share Posted August 13, 2007 charliecloud's 945 was mine. Unfortunately, KSC blowback performance is so *suitcasey*. If only I could find a zeke m945c brass kit. Link to post Share on other sites
the cleaner Posted August 14, 2007 Report Share Posted August 14, 2007 (edited) charliecloud's 945 was mine. Unfortunately, KSC blowback performance is so *suitcasey*. If only I could find a zeke m945c brass kit. <{POST_SNAPBACK}> ZEKE M945C silvers go for about $550 ZEKE M945C goldies go for about $750. . last I've seen. . .that was several years (at least 3 ) ago. . . btw. .there's a "gold"(brass) V10 kit too. .don't know if you've ever seen that one. . .not by Prime, I believe it was Sheriff. (other brass kits I've seen: ZEKE Maruzen PPK, ZEKE Maruzen P38, ZEKE Tanaka Luger 04-08, ZEKE DEagle, ZEKE Marushin M712 ) ------ I would've loved to have a full metal M945 and tinker with the power (or lack thereof). . .same goes for the Sig Pro series. .i just know I can do something to bring the power out. . at least to skirmishable grade. Edited August 14, 2007 by the cleaner Link to post Share on other sites
hitmanNo2 Posted August 14, 2007 Report Share Posted August 14, 2007 Theres a brass version of pretty much all the Prime kits. Link to post Share on other sites
realsteel Posted August 14, 2007 Report Share Posted August 14, 2007 No, it went on just fine, fired fine as well, though you have to use the 1911 slide catch, the Hi capa catch doesn't work <{POST_SNAPBACK}> I thought you need the Tanio Koba spacer to put a 5.1 slide on a 1911. Link to post Share on other sites
Recommended Posts