PlasticMag Posted March 28, 2006 Report Share Posted March 28, 2006 The topic is missing, isn't it. The outer diameter changes, if that was your question. It stays at about 15-16mm. Link to post Share on other sites
thegunrunner Posted March 28, 2006 Report Share Posted March 28, 2006 Thanks, looks like the topic didn't get posted. I was wondering if the M70 barrel parts would at least slide onto the TM barrel. If this works, I plan to put holes into the TM barrel so I can use the pins to attach the Yugo barrel parts. If not, I may have to use one of my AKM as the base. Link to post Share on other sites
PlasticMag Posted March 28, 2006 Author Report Share Posted March 28, 2006 Nope, won't work. The outer barrel diameter changes too much. (By that, I mean it steps down after every pinned area). I'm doing it right now myself. Link to post Share on other sites
thegunrunner Posted March 28, 2006 Report Share Posted March 28, 2006 Are the parts too big or too small to fit on the TM barrel? I think if bondo or some other filler was used, it could help solve the problem of it being too big. (Parts fit loosely on the barrel) Thanks for the help. I am one of those really careful people and don't want to risk buying a parts kit and finding out firsthand that it won't work. Link to post Share on other sites
PlasticMag Posted March 28, 2006 Author Report Share Posted March 28, 2006 Too big. BTW, the problem with the parts kits is the pins. They're in TIGHT. I used a hydraulic press to get my pins out, and that was hard as hell to do. Almost ruined the parts kit. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.