jim_dandy Posted December 30, 2006 Report Share Posted December 30, 2006 Updated my gun.. http://img.photobucket.com/albums/v102/Sparky2129/1.jpg http://img.photobucket.com/albums/v102/Sparky2129/2-1.jpg Got rid of that SRC stuff, in fact the entire gun has a new base. Base Gun: Classic Army M15 Carbine Externals: -Hurricane Blank Metal Body -G&P M4 CQBR Front Set (Carbine Version) -Knights Armament Vertical Foregrip -Tokyo Marui Rear Sight -VFC AN/PEQ2 with 9.6v 2000 MAH battery -EOTech 552 in LaRue EOTech Mount -LaRue Battlelight -VLTor Modstock with Butterfly Latch -VFC Battlegrip Replica -Guarder "Enhanced" Stock Pipe -G&P Rear Sling Mount Plate Internals: -G&P Reinforced Gearbox -M120 -KM TN Tightbore -Systema Red Polycarbonate Piston -Systema Pistonhead with bearing -Hummer Torque motor -Big-Out H-Hop <{POST_SNAPBACK}> Yeah! The CQBR front set is rock solid, innit? My lack of experience made me wonder why the front sight wouldn't sit still until I found that little grub screw underneath and tightened it with the appropriate allen wrench. Do you mind having a flip-up behind the regular front sight? I was going to use a sawed off A2 carry handle to match the front with an Aimpoint in the middle. Link to post Share on other sites
davedawg123 Posted December 30, 2006 Report Share Posted December 30, 2006 umm..its a sun project M4, so its powered by gas. thus no battery <{POST_SNAPBACK}> I guess I missed it where he posted that. That or your airsoft detectar is better than mine. Link to post Share on other sites
Souske Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) Fun to paint, and it didn't turn out too bad. Basic carbine SOPMOD with 6 pos. stock, AP, and suppressor. Edited December 30, 2006 by Souske Link to post Share on other sites
Cpt. Shadow Fox Posted December 30, 2006 Report Share Posted December 30, 2006 Looks very tropical. Link to post Share on other sites
judgeman Posted December 30, 2006 Report Share Posted December 30, 2006 My M4, sorry about the *beep* pic as I am still learning to use my new camera G&P Noveske metal body G&P Aimpoint TM Stock Real Steel M4 buttpad G&P One-peace front end G&G 900 round double mag modified rear sight AIM gearbox & Inner barrel G&P Metal hopup Link to post Share on other sites
Holmes Posted December 30, 2006 Report Share Posted December 30, 2006 My ICS with a new silencer: Link to post Share on other sites
no1rc3ur Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) judgeman, it is some crappy picture. can't see the front i'll wait for the next pic. Edited December 30, 2006 by no1rc3ur Link to post Share on other sites
demoncase Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) My collection.... Edited December 30, 2006 by demoncase Link to post Share on other sites
demoncase Posted December 30, 2006 Report Share Posted December 30, 2006 (edited) Some of my other work... XM177, with custom FNC flashhider metal front end. Battery re-routed to readymag system. Finished by me in Desert Krylon. M16 Patriot- cut down M16a2 with unknown Patriot kit fitted...sweet SMG SR16 RIS CA M15 metal body and M4 stock Guarder Aimpoint replica Woodland Paintjob in Tamiya TS sprays by me. Edited December 30, 2006 by demoncase Link to post Share on other sites
squeeky Posted December 30, 2006 Report Share Posted December 30, 2006 Updated my gun.. Got rid of that SRC stuff, in fact the entire gun has a new base. Base Gun: Classic Army M15 Carbine Externals: -Hurricane Blank Metal Body -G&P M4 CQBR Front Set (Carbine Version) -Knights Armament Vertical Foregrip -Tokyo Marui Rear Sight -VFC AN/PEQ2 with 9.6v 2000 MAH battery -EOTech 552 in LaRue EOTech Mount -LaRue Battlelight -VLTor Modstock with Butterfly Latch -VFC Battlegrip Replica -Guarder "Enhanced" Stock Pipe -G&P Rear Sling Mount Plate Internals: -G&P Reinforced Gearbox -M120 -KM TN Tightbore -Systema Red Polycarbonate Piston -Systema Pistonhead with bearing -Hummer Torque motor -Big-Out H-Hop <{POST_SNAPBACK}> Yay for real steal stuff!!! LOL Link to post Share on other sites
Victory Posted December 30, 2006 Report Share Posted December 30, 2006 Holmes...what suppressor is that? Lookin' good! -Vic Link to post Share on other sites
Holmes Posted December 31, 2006 Report Share Posted December 31, 2006 Tis the JBU one. Not a bad piece of kit. Solid, and plenty of real estate for some foam . Link to post Share on other sites
mremerica Posted December 31, 2006 Report Share Posted December 31, 2006 Right so Im all done with the painting, and Im very happy with the results! A couple of pics with some gear: And one of the gun on its own: I think Im just about done with the gun - the only change I really want now, is a 10.5in barrel, but for now its time for some new gear! Link to post Share on other sites
MDK_Marshal Posted December 31, 2006 Report Share Posted December 31, 2006 I've been meaning to do it for a while, and last night I got off my lazy *albartroth* and made myself a partiot type thingumy. After a bit of chopping and gluing, we have the finished product... Technically, though, It's a REALLY chopped-down M16 VN version with a mangled carry handle. Best of all is how i store the battery in this wee thing - I don't! It's based on a KAC springer, and has been, eh, tweaked a bit. It's of a rather nice internal design that takes AEG sized springs, so i frankenstined a TM piston head onto it, to give it pretty much perfect compression, and added some AEG spring I had lying around - a 1J one, I think. No hop-up, though, but this is just for humiliation kills, so i don't care With the tweaking, I'd hazard a guess at it firing at around 260fps with a 0.2g BB - without a chrono, though, I relay don't know! Can't wait to skirmish with this little beast! Link to post Share on other sites
fnfr3ger Posted December 31, 2006 Report Share Posted December 31, 2006 where does the battery go ? Link to post Share on other sites
NegativeCambre Posted December 31, 2006 Report Share Posted December 31, 2006 where does the battery go ? <{POST_SNAPBACK}> Its a springer, he mentioned that in the post. Link to post Share on other sites
No Mercy Posted December 31, 2006 Report Share Posted December 31, 2006 (edited) New Ptw Iraq Style PTW Edited December 31, 2006 by No Mercy Link to post Share on other sites
Jeza Posted December 31, 2006 Report Share Posted December 31, 2006 smexoi Link to post Share on other sites
BoB SoiL Posted December 31, 2006 Report Share Posted December 31, 2006 Another PTW? Sir, I envy you! Link to post Share on other sites
MDK_Marshal Posted December 31, 2006 Report Share Posted December 31, 2006 On a more serious note than my last post, here's my AIM M4 - It's going to be the only AEG I own soon ;_; But, yeah, here she is. nice and clean at the moment, nothing added externally. It's not stock though, Oh no, far from it. This girl's had pretty much everything upgraded, and the rest is gona be done son. Not a drop of original will be left Internaly, We've had: Madbull Shark hop bucking Element Steel gear set (apart from bevel gear) Area 1000 oilless bushings Re-shimmed Systema Magnum Motor CA Wiring loom for M4 External upgrades: Metal Outer barrel (Unknown brand - looks to be in two bits...) TM front sight and flash hider CA (I think) Stock Tube and stock TM Tracer unit (not shown) Got a few more bits coming for it, too. En route from HK we have: G&P Delta ring set (stock delta spring is WEAK!) King arms ARM type mag catch (Ambidextrous thing) G&P Polyacetal Piston Deep fire piston head Box of MAG Midcaps And, on my to buy list, when I can afford them (Or, as soon as possible ): G&P Fire Pig Metal Body 2ROy M203 Three-pack of madbull 'nades At the moment, I'm quite happy with it. I've taken a single tooth off the sector gear, and plan to swiss cheese this piston for more ROF, but at the moment it gives about 16rps on an 8.v and a squeak under 20rps on a 9.6, which I'm pleased with. I think the FPS is somewhere in the region of 300 with a 0.2, mainly because of the sector gear. Probably going to take another tooth off and add a stiffer spring, but I may leave it alone. metal body is a necessity, as the stock one has only one intact tab left. That includes the front tabs! They're currently held together with superglue and praying. Any suggestions of anything more that I could do to it? Link to post Share on other sites
jim_dandy Posted December 31, 2006 Report Share Posted December 31, 2006 http://img.photobucket.com/albums/v644/XNo...TW/DSCF1942.jpg New Ptw <{POST_SNAPBACK}> Did you remove the gas-block? Or is it just hidden? Link to post Share on other sites
No Mercy Posted December 31, 2006 Report Share Posted December 31, 2006 (edited) low profile, On its way, but there isnt one in there now and Mdk, Dont swiss cheese the G&P polycal Piston, It will snap in half. yesterday, i saw a regular one snapped from the 4th tooth back The magnum motor should be enough and with the 9.6v you should be getting more than 20 rps if your on a stock spring , your shimming is tight Edited December 31, 2006 by No Mercy Link to post Share on other sites
Milla Posted December 31, 2006 Report Share Posted December 31, 2006 milla i like that set up milspec to the bones <{POST_SNAPBACK}> haha, thanks man, i plan on maybe a Bushmaster or Colt body, and than some internal work (maybe) and its done. Link to post Share on other sites
SilentScope Posted December 31, 2006 Report Share Posted December 31, 2006 New Ptw <{POST_SNAPBACK}> I got a fever. And the only prescription... is moar LaRue!!! Link to post Share on other sites
ferretkiller Posted December 31, 2006 Report Share Posted December 31, 2006 I got a fever. And the only prescription... is moar LaRue!!! <{POST_SNAPBACK}> LOL..... Nice Link to post Share on other sites
Recommended Posts