SlvrDragon50 Posted July 13, 2007 Report Share Posted July 13, 2007 Link to post Share on other sites
ChrisWPA Posted July 13, 2007 Report Share Posted July 13, 2007 Yea on my resolution there pretty big but nothing huge. Sorry, Learn from your mistakes i guess. Does anyone got any ideas on which sight i should go with? I was going to go troys but i got a good deal on the rear so i got it. Link to post Share on other sites
ghost_x3 Posted July 13, 2007 Report Share Posted July 13, 2007 <{POST_SNAPBACK}> That is one sick gun, but it would be much better with a bigger scope! Link to post Share on other sites
davedawg123 Posted July 13, 2007 Report Share Posted July 13, 2007 Yea on my resolution there pretty big but nothing huge. Sorry, Learn from your mistakes i guess. Does anyone got any ideas on which sight i should go with? I was going to go troys but i got a good deal on the rear so i got it. <{POST_SNAPBACK}> I'd dump it and go with Troy's. Or, get a triangle front for rail like on one of those CA CQB compacts. Not sure a flip front would go well with that. Link to post Share on other sites
SlvrDragon50 Posted July 13, 2007 Report Share Posted July 13, 2007 I find the uber big scopes to be useless in game so I dont have one.. And I dont want to buy one just for pictures.. Link to post Share on other sites
mean_marine Posted July 13, 2007 Report Share Posted July 13, 2007 Hey, mean_marine, I had the same problem with the pin on my G&P, and it was with a G&P Box! It went in most of the way but didn't line up the other side, this was solved by taking it all apart and inserting the pin at the start, rather than the end of the build. If you've tried that, then obviously scratch this. Tried that unfortunately I have installed other g&p bodies, with different gearboxes CA/g&p etc although havent really had this problem . I will fix it eventually though Nice pics guys.. Link to post Share on other sites
icedragon62001 Posted July 13, 2007 Report Share Posted July 13, 2007 damn chris everytime i see your gun, it just looks better and better Link to post Share on other sites
Tommygunn Posted July 13, 2007 Report Share Posted July 13, 2007 XxChRiSxX, Have you replaced the upper receiver of your CA to enable the rail to line up with the front RAS rail? Link to post Share on other sites
Hispeed1 Posted July 13, 2007 Report Share Posted July 13, 2007 Here's the rest of the pics. What external stuff do you guys think I should get for it. One of those SIR systems or a lighted forearm similar to a Swat loadout? <{POST_SNAPBACK}> Nice-as for your question on external acces., try a 7 inch free floating RAS handguard, replica ARMS SIR's are okay, they make your AEG so heavy-had a TM S-System before. Try not to get a replica Surefire lighted forearm-it looks so 80's. I think you can get more creative with a railed handguard. Also try to find a rail mounted tactical light, G&P, King Arms, etc makes good affordable ones. Good luck! Link to post Share on other sites
MERCILESSPIT Posted July 13, 2007 Report Share Posted July 13, 2007 Very nice CQBR Hispeed. Clean and functional. Link to post Share on other sites
ViciousV10s Posted July 13, 2007 Report Share Posted July 13, 2007 Very nice HiSpeed, clean and mean! Link to post Share on other sites
Hispeed1 Posted July 13, 2007 Report Share Posted July 13, 2007 Very nice HiSpeed, clean and mean! <{POST_SNAPBACK}> Thanks Vicious. Link to post Share on other sites
ChrisWPA Posted July 13, 2007 Report Share Posted July 13, 2007 WOW paul thats amazing Thanks guys I cant wait to get this gun completed so I can start a CASV project!!!! But yea, A flip up would look like ###### but i think the CQB front sights are not made for the RAS, but a rail block thats lower. The madbull talon comes with a little spacer that you put under the top rail to make it line up perfectly with CA top receivers, Pretty nice madbull did that. I also dont really think you need a madbull ras fix as they said on the websites, Its just another way to get you to buy another madbull product. Mines more sturdy then I imagined, There is 0% wobble. Thanks again Link to post Share on other sites
ViciousV10s Posted July 13, 2007 Report Share Posted July 13, 2007 <{POST_SNAPBACK}> Paulc I think you should put the sniper style trigger guard on the longer more sniper-ish rifle...just my opinion tho. nice weapons Link to post Share on other sites
SgtBojangles Posted July 13, 2007 Report Share Posted July 13, 2007 Oy, but that pistol grip is so darn comfortable! I've the one made by CAA on my real steel and it's AMAZING. Link to post Share on other sites
Fuser Posted July 13, 2007 Report Share Posted July 13, 2007 Current rifle setup, and all the gear that I own. CA M15A4 R.I.S. Carbine AP Clone Magpul 5.56 Magpul XT Rail Panels Pro-tec ESS Profile NVG Mechanix gloves Satellite 3-Point Battery Sling Link to post Share on other sites
AllInBlack Posted July 13, 2007 Report Share Posted July 13, 2007 CQB Seal .. I guess I like to keep things simple. Link to post Share on other sites
ChrisWPA Posted July 13, 2007 Report Share Posted July 13, 2007 Very nice, See what i mean though the front sight is not made for going on the RAS. It would be to high. Link to post Share on other sites
Fuser Posted July 13, 2007 Report Share Posted July 13, 2007 (edited) Slightly better pic, lighting is still *beep*. Edited July 13, 2007 by Render Link to post Share on other sites
1cem4n Posted July 13, 2007 Report Share Posted July 13, 2007 does anybody know of a good short armalite RAS? something like the JBU one except regular looking. I'd like it to be like the Classic Army shorty m15 ones. Link to post Share on other sites
paulc Posted July 13, 2007 Report Share Posted July 13, 2007 (edited) Chris: Thanks man Vicious: hhehe, i would've but it's my nephew's aeg. I just changed his front end from the CA Quad fiber to this Here's the rest of the M4s. I hope to stop from here...yeah right! lol (I know the picture sucks ) Edited July 13, 2007 by paulc Link to post Share on other sites
Jagdraben Posted July 14, 2007 Report Share Posted July 14, 2007 Then the ancestor of the SCAR was also the AR-15, because they are so damn similar. The 416 is really just H&K's version of the AR-15 platform with the added piston system of the G36. <{POST_SNAPBACK}> The SCAR actually uses a completely different and unique operating system. The only similarities between the two are the lower receiver on the Light. The operating system of the SCAR has much more in common with the M1 and M2 Carbines then with the AR-15. So it's unacceptable to post SCARs here, because it's a completely different weapon. The HK416 is simply an AR-18 (an Armalite) with the shell of an AR-15. Link to post Share on other sites
evansy Posted July 14, 2007 Report Share Posted July 14, 2007 does anybody know of a good short armalite RAS? something like the JBU one except regular looking. I'd like it to be like the Classic Army shorty m15 ones. <{POST_SNAPBACK}> Something like this? http://www.classicarmy.com/product-popup.jsp?productid=885 If you've got a CA dealer near you ask if they can get them in stock for you. Link to post Share on other sites
Recommended Posts