Jett Posted November 11, 2006 Report Share Posted November 11, 2006 Or are the stock arms too long to enable it to close? Has anyone got an MP5k with a sliding stock fitted that can help me? Cheers! Jett Link to post Share on other sites
machgo Posted November 11, 2006 Report Share Posted November 11, 2006 I have both guns, and while I wouldn't say it's impossible, I would say it's not worth the tremendous effort it will require. The end plates are different for one.... Link to post Share on other sites
Ghost_Rider Posted November 11, 2006 Report Share Posted November 11, 2006 Short answer - No. Long answer - Yes, but it takes a LOT of effort. Link to post Share on other sites
Stealthbomber Posted November 11, 2006 Report Share Posted November 11, 2006 This is another one that comes up pretty regularly. The MP5 receiver is about an inch longer than the K one. To fit an MP5 stock on a K you need to make a plug to extend the receiver by an inch which secures via the K pin holes. You then need to grind away the molded plates in the sides of the K receiver. When you've done that, you'll get an MP5 stock on. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.