PlasticMag Posted August 2, 2007 Report Share Posted August 2, 2007 So the RS gas tube and slant fit on the ICS barrel perfectly? And everything mounted on the CYMA reciever perfectly? Will RS gas block parts fit on a TM barrrel? <{POST_SNAPBACK}> Nope. I had to do a LOT of work on the parts to make them fit. And I'm using a G&P metal rear sight block modified to accommodate real AK foregrips, so it had to be modified slightly to fit the receiver. Trust me, there's a LOT of work there that you can't see. RS gas parts will fit a TM barrel, but need to be bored out a bit to slide down the barrel. Link to post Share on other sites
dookieboy Posted August 2, 2007 Report Share Posted August 2, 2007 How much boring is required? Like just get a thick drill bit and drill a bit? And then could I just use a RS handguard with RS gas block switch? How much modded in time/hours/work do you think? Thanks for helping Plastic Mag! Link to post Share on other sites
PlasticMag Posted August 2, 2007 Report Share Posted August 2, 2007 (edited) How much boring is required? Like just get a thick drill bit and drill a bit? And then could I just use a RS handguard with RS gas block switch? How much modded in time/hours/work do you think? Thanks for helping Plastic Mag! <{POST_SNAPBACK}> I used a Dremel grinding drum, a sanding drum, and two reinforced cutting wheels and it took around 4 hours of constant work and measuring to get the gas block/gas tube fitted. Even then, you need to modify the airsoft rear sight block to fit the real parts. It's not exactly the easiest thing to do, and it WILL test your patience and your trust in a god. That's 4 hours of hand work. For the rear sight block mods I took a drill press for part of it, but most of it was good old fashioned Dremel fun. Edited August 2, 2007 by PlasticMag Link to post Share on other sites
dookieboy Posted August 2, 2007 Report Share Posted August 2, 2007 Hmm.. I don't know if I am capable...I have a dremel, not sure how good. Do you think I could do this wiyh regular tools? What RS parts will fit with less than 1 hour of hard modding Link to post Share on other sites
PlasticMag Posted August 2, 2007 Report Share Posted August 2, 2007 Ummm... Wooden grips on their own, and that's about it. Link to post Share on other sites
dookieboy Posted August 2, 2007 Report Share Posted August 2, 2007 Well that sucks... I wanted to put moar RS stuff on it but can you screw up bad? I mean wooden grips were easy for me. But what can you fit on everything? Or could I some how modify parts, like the gas block hinge to fuction like RS? Link to post Share on other sites
Laxplayer19x93 Posted August 2, 2007 Report Share Posted August 2, 2007 Well, I am thinking about getting an AK, and I would want to upgrade the externals, but only a little bit of the internals. So instead of making a new topic, I am just gonna ask here. What is the best base gun for someone of really doesn't want to touch the internals to much, but wants to upgrade the externals? Also, for those awesome folding stocks in some of the pictures, where do you put the battery? I am assuming a battery pouch, but might as well get a straight-forward answer. Thanks for the help, and now to make this not off topic: (Not mine, found it off google lol) Link to post Share on other sites
Skarclaw Posted August 2, 2007 Report Share Posted August 2, 2007 TM Ak. Link to post Share on other sites
evilliboba Posted August 2, 2007 Report Share Posted August 2, 2007 The battery goes under the top cover of the receiver and sometimes into the front set. Stick type. Link to post Share on other sites
Laxplayer19x93 Posted August 2, 2007 Report Share Posted August 2, 2007 Is it also possible to convert the TM AK 47 to anything, using the conversion kits from Russian Mania Workshop? Link to post Share on other sites
my_plague_666 Posted August 2, 2007 Report Share Posted August 2, 2007 well, anything that's made in an inokatsu kit at least or you could buy the parts separately from cheaper chinese manufacturers, they wont be as nice as the inokatsu stuff you;ve seen on RMW but it does the job Link to post Share on other sites
appslapp Posted August 2, 2007 Report Share Posted August 2, 2007 (edited) On your own risk..you ak47fundametalist I wanted too join the cloneclub.... c.m 028U+ and a small kit. 250$ for all, with shippment.....and thats for two different shops My PMCrpk pdi190% km m16 barrel lipo 11v2500 in the drum(wating for the VFC lipo stick;) All will be painted Edited August 2, 2007 by appslapp Link to post Share on other sites
Blingmaster$$ Posted August 2, 2007 Report Share Posted August 2, 2007 i really like that RPKish weapon Link to post Share on other sites
Hatman Posted August 2, 2007 Report Share Posted August 2, 2007 A sopmod RPK? That has to be one of the unholiest ideas to grace this forum! You actually made a freaking sopmod RPK?! Ah well, let me see how awful it is... Wait, that's pretty good actually. Link to post Share on other sites
MagicalNinjaBuddy Posted August 2, 2007 Report Share Posted August 2, 2007 That PMCrpk is AWESOME. Link to post Share on other sites
iloveics Posted August 2, 2007 Report Share Posted August 2, 2007 That actualy isn't bad. Link to post Share on other sites
my_plague_666 Posted August 2, 2007 Report Share Posted August 2, 2007 ditch the aimpoint and it might be the best 'raped' AK ive seen. and im not usually a fan. makes me want to see a skeleton folding stock polymer furnature RPK74. Link to post Share on other sites
Gigueand Posted August 2, 2007 Report Share Posted August 2, 2007 Is it me or does that AK RPK just look enormous? Or maybe appslapp isn't a big guy... I tried envisioning it even without the RPK kit on, and in those photos it still seems massive. Anyway, nice gun, appslapp. Can you give some feedback about the stock. How it feels, operates, etc? As well as pics of the gun with the stock folded? Link to post Share on other sites
appslapp Posted August 2, 2007 Report Share Posted August 2, 2007 170cm;) the stock is solid, its operate like the fnc stock...push it down and fould it. Link to post Share on other sites
MDK_Marshal Posted August 2, 2007 Report Share Posted August 2, 2007 That is an awesome looking gun, I gota say. It just looks... Right! Link to post Share on other sites
Jaager Posted August 2, 2007 Report Share Posted August 2, 2007 that gun is so, wrong, kool but wrong, if that makes sense. but, it looks huge when you hold it, but it doesnt look as big on the floor. Link to post Share on other sites
appslapp Posted August 2, 2007 Report Share Posted August 2, 2007 (edited) If you are going to make a PMCrpk the same way i did, have in mind that the barrel on the cyma 028U is to wide to use the rpkkit from scr. I had to take an old TM ak47 barrel and even then I had to do some metall work to get the SCR kit to fit. Edited August 2, 2007 by appslapp Link to post Share on other sites
MagicalNinjaBuddy Posted August 3, 2007 Report Share Posted August 3, 2007 It's not very pleasant on my eye's but I appluad your originality. <{POST_SNAPBACK}> You're not very pleasant on any body's eyes. Link to post Share on other sites
O_RLY?.YA_RLY! Posted August 3, 2007 Report Share Posted August 3, 2007 http://i105.photobucket.com/albums/m202/dr...pmcrpkwebb9.jpg http://i105.photobucket.com/albums/m202/dr...mcrpkwebb10.jpg That looks freaking awesome. Link to post Share on other sites
lineman66 Posted August 3, 2007 Report Share Posted August 3, 2007 good lord, I just had a play with the Inokatsu Galil ARM... so hawt I could barely contain the big grin on my face when I held it! If I decide to not eat for 2 months and buy it I'll be sure to take pictures... Link to post Share on other sites
Recommended Posts