Jump to content

Recommended Posts

The Box, not particularly stunning...

Airsoft474.jpg

 

Whats in the box, midcaps are stacked two on top of two

airsoft475.jpg

 

The MAG midcaps lacks the HK markings of the Marui mag

airsoft477.jpg

 

The MAG midcaps are also much more difficult to pull out as compared to the Marui mp7 mag which pops out and hangs once you pull down the mag release. With the MAG midcap you must hold down the mag release and use a little strength to pull the the midcap out, its definately not good for fast reloading because the part of the mag that catches on to the mag release is way too wide.

Here it is compared to the marui mag catch

airsoft478.jpg

This problem could be easily resolved by taking a dremel to it and simply peeling off the excess until it looks like the marui mag.

 

The MAG midcaps are best loaded with a speedloader as the spring is tense and you will find it difficult to load by hand, if you dont have a speedloader invest in one.

airsoft480.jpg

You may also want to spray a little silicone in the mag before you load the BBs or it might misfeed now and then. The last BB in the mag is not fired because the spring does not push out of the midcap like it does in the marui mp7 mag. But the last BB will be pushed out of the midcap and just sit on it. Ive heard that about 3 BBs get stuck in MAG midcaps in the M4 or MP5 versions of it, thats not the case here.

 

The midcap fits the look of the MP7 perfectly

airsoft487.jpg

airsoft488.jpg

airsoft489.jpg

airsoft490.jpg

airsoft492.jpg

 

Pros

-cheap/inexpensive (47.99 USD shipped from eHobbyAsia)

-feeds well

-doesnt rattle but still has decent capacity

-looks good on the MP7

Cons

-difficult to reload

-lack of HK markings

 

Conclusion

For those looking for some extra mags for a CQB game this is a great value, with a little dremel work, the major con of the mag can be fixed and you will have perfectly reliable spare mags for your MP7.

Edited by willnyc
Link to post
Share on other sites
  • 1 month later...
  • 1 month later...

I just received a pack of these mags and found that they fit nicely in the Well MP7 (R-4) without any modification to the mag catch bit. When I press the release they fall out easily so they've either changed the mold or the Well MP7 was designed with the MAG magazines in mind.

 

They also happen to fit 2 to an M4 mag pouch :)

Link to post
Share on other sites
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and the use of session cookies.