curlyboy Posted January 24, 2012 Report Share Posted January 24, 2012 Depending on the mood and loadout it is either TM P226 + 5 mags TM M.E.U + 3 mags KSC Glock 17 + 3 mags TM M92F + 3 mags All have serpa holsters so i can tailor as needed with the changing of 3 screws. curlyboy Link to post Share on other sites
Kee-Rov Posted August 27, 2012 Report Share Posted August 27, 2012 KJW Sig P226 + 3 mags Link to post Share on other sites
DrAlexanderTobacco Posted August 27, 2012 Report Share Posted August 27, 2012 KJW P226 and 2 mags. Although the holster I've got for it is a little too small, so I have trouble pulling it out. I'll be sanding the inside down a bit though. Link to post Share on other sites
original poster Posted August 28, 2012 Report Share Posted August 28, 2012 TM M92F Tactical Master with 2 mags. Although I want to add a Glock 17 as well! Link to post Share on other sites
starburst Posted August 29, 2012 Report Share Posted August 29, 2012 I have a (now broken) TM P226R and a relatively new TM PX4, looking at getting the P226 fixed at the moment and then replace or add a P226E2. Wouldnt mind a Glock 17 myself but its that question of TM or KSC/KWA. Link to post Share on other sites
FireKnife Posted August 29, 2012 Report Share Posted August 29, 2012 A Harrier jump jet stationed at an undisclosed airfield with a special bb based payload. Still it never turns up at the right site, stupid pilot In reality can't go wrong with my Detonics on my belt. 'FireKnife' Link to post Share on other sites
Shardik Posted August 30, 2012 Report Share Posted August 30, 2012 KSC Glock 17 with opitronics laser. 4x mags. TM M3 Super 90 custom, with 11 shells. WE XDM 40.. Just bought it so will be buying new mags ASAP if I decide to keep it. Link to post Share on other sites
bobthebuilder Posted August 31, 2012 Report Share Posted August 31, 2012 KJW G23 on or about my hip. used more for building entry and clearing than anything, but it's there as a backup if I need it. Link to post Share on other sites
WestyIII Posted August 31, 2012 Report Share Posted August 31, 2012 10 year old mac10 Link to post Share on other sites
Deinhardt Posted October 30, 2012 Report Share Posted October 30, 2012 Main backup is my marui hicapa 4.3, after that my WA beretta m1934, then finally my Marushin saa =! Link to post Share on other sites
Baddbaz Posted October 30, 2012 Report Share Posted October 30, 2012 Kwa m93 r awkward to carry but more than makes up for it when it gets used . Tri burst makes sure everyone takes their hits ! Also has pretty good range as well so makes a pretty good primary with 38 round mags Link to post Share on other sites
Piston Head Posted March 22, 2013 Report Share Posted March 22, 2013 KWA Glock 17 "the workhorse" KSC Glock 19 ..mabye getting a TM Glock or a TM Sig P226 Link to post Share on other sites
tquilha Posted March 23, 2013 Report Share Posted March 23, 2013 My new backup piece: Link to post Share on other sites
Piston Head Posted March 23, 2013 Report Share Posted March 23, 2013 could be usefull in POW situations Link to post Share on other sites
T3CH Posted March 23, 2013 Report Share Posted March 23, 2013 MK23 SOCOM. Link to post Share on other sites
Wingman Posted March 24, 2013 Report Share Posted March 24, 2013 1.) TM PX4 Storm w/ 4 spare magazines 2.) KJW KP07 MEU w/5 spare magazines 3.) KJW G23 w/ 4 spare magazines Will be trying out latest purchase: KJW P229. Need a few more spare magazines. I have been able to use my older TM P226 magazine but the new E2 mags will not lock up due to a change in the back of the magazine where its cut out for the flow valve. Shoots nice though. Using my P226 Blackhawk Serpa holster for now. Fits perfect. Link to post Share on other sites
northernairsofter Posted March 25, 2013 Report Share Posted March 25, 2013 TM MEU with a shed load of extended mags Link to post Share on other sites
Imperator Posted March 27, 2013 Report Share Posted March 27, 2013 Flame me all you want!5yo WE M1911, doesn´t skip a beat! Link to post Share on other sites
Shardik Posted March 27, 2013 Report Share Posted March 27, 2013 Watch you don't step in no Link to post Share on other sites
Imperator Posted March 27, 2013 Report Share Posted March 27, 2013 And with little to no maintenance. Can't recall the last time I lubbed the bogger... Link to post Share on other sites
Simba4793 Posted May 2, 2013 Report Share Posted May 2, 2013 A kinfe (ive actualy used it more then any of my guns) Link to post Share on other sites
gisburn20 Posted May 12, 2013 Report Share Posted May 12, 2013 My AA 1911 MEU, Just spent an hour or so deep cleaning it after a few years hard use (she gets a field strip, clean and lube after every game) but today I felt like giving her some TLC, so I pulled it totally apart, degreased and put everything through an Ultrasonic cleaning bath. No wear on any of the sears at all I was very impressed. Gave all the internals a dab of moly grease (Castrol LM) and she is running beautifully. A fair bit of muck came off in the Ultrasonic cleaner, I might have to run all of my pistol's internals through it when I get time to deep clean them. Jim Link to post Share on other sites
PureSilver Posted May 24, 2013 Report Share Posted May 24, 2013 What sort of ultrasonic cleaner have you got, Gisburn20? I've been trying to pull the P226 apart every few hundred rounds because as it wears in it's dumping little metal particles into the lube, which then form an abrasive paste that I don't want eating all my contact surfaces. I want to take the whole thing to bits and give them all a really good scrub when I finally get around to giving it some more internal upgrades, so if this ultrasonic stuff is good I could be interested. Link to post Share on other sites
gisburn20 Posted May 24, 2013 Report Share Posted May 24, 2013 I have one of these http://www.amazon.co.uk/dp/B002WBKLBS I got mine from Maplin, but they don't seem to stock that model any more, it was about £30 from them I think. I used the Sea Clean fluid they sell with them and it did a pretty good job. Too small for a 1911 slide or frame but the internals fitted nicely in small batches. I would love one of the bigger models but just can't justify the cost. Jim Link to post Share on other sites
Beeingmyself Posted May 24, 2013 Report Share Posted May 24, 2013 KSC USP.45 S7. Actually I have 3 of theese now. Just bought a few in parts and put them all together and still have spare parts leftover. But to be said they are kind of hard to find parts for so whenever I see a broken one at a fair price I buy it. Which also means I have 5 mags for them now which is nice since I like rounds of plain pistols But mainly because it is a very good gun which don't need any upgrades just works out of the box which is very nice and are capable of using redgas without any moods. Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.