-
Content Count
185 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by Lughnasadhuk
-
-
Thanks for the advice on what to do before firing a shot Marky [uE]. I will receive my WE M4 from Landwarrior on Wednesday so it is good to know what to do before getting stuck in.
I am hoping that I dont get a lemon, but then I guess that is what a warrantee is for.
WETTIs posts are all very exciting news, I hope SCAR and M4 use same mags so I can get one at a low start up cost!
-
For you brits with this gun, you can now buy spare #122 WE washers from the UK, from the link below http://www.tacticalquartermaster.co.uk/cat...c2805aa79afcbc3
£3.99 for the pack of 5.
-
LT. Fenix,
No offense but your tone is bringing down this thread.
I get the feeling that you have issues with rottenotto and the information he posts but I also notice he has risen above it and is ignoring you which is probably what more people will start to do if you continue your slur.
He may be wrong, I dont know as I have not yet bought a WE M4, but in the near future when I do buy one I will PM him for any advice I may need because he has been contributing for the benefit of the rest of this community.
If you disagree you could just try posting your own informative opinion while neglecting to comment on his.
-
I see ebaybanned are selling steel bolt stops like this;
http://ebaybanned.com/product_info.php?pro...c620112c5d0c04a
would they be compatible with the WE GBB?
-
It was constant struggle against fogging and there was water on the goggles all the time.
Have you tried using FogTech to combat the fogging and water? I did a trial at work where I coated half a pair of glasses with fogtech then left them in a -20oC freezer for 7 hours and when I removed them the treated half did not fog at all. I use the stuff all the time at skirmishes now but we dont get down to minus 20 in Scotland
-
Personally I am going to wait until January to see if the GBP has regained some of its strenght over the USD. If I had bought one of these about 4-5 months ago for the $460 It would have been about £80 because of the exchange rate (and at that exchange rate £80 was about $150!)
So hopefully I can wait and get CO2 mags and a better deal all at the same time
-
Here's my .02
-RA Bolt Stop Optional (you can make the stock one work with some slight modifications)
GBBNut, I dont remember seeing anything about this previously in the thread and thought an aftermarket bolt stop was a requirement so this is interesting. What mod is needed to the stock one to increase its lifespan?
Anything that reduces the amount of extra parts you need to buy and as such reduces the additional cost has got to be a good thing
-
My girlfriend is also bitching about that I got 3 guns now.. Guess I need to trim it down to two.
LOL. My wife would love it if I only had three guns
I have 7 and want to add a WAM4 and a Systema MP5.
-
Has anyone installed the Pro-Win Hop Up Kit for WA M4A1. Is it a metal replacement part?
I can not find anywhere where it says what material this is made from.
Oh, and if you use this hop with the carbine then what is the max length barrel that can be fitted to the stock outer and flash hider with no silencer? Is it 368mm?
Cheers
-
Grr, this thread is the 'Western Arms M4 CQB-R' thread.
I think it would be unreasonable for anyone to think that post relating to the M4a1 is off topic. But surely I can expect posts, especially bad ones, about the Inokatsu MTW to be posted in the appropriate thread leaving this thread for the WAM4.
This thread started as a very good informative thread relating to the WA GBB M4, its cons, pros, after market parts etc. It is, however, degenerating into an area for people to post messages that are nothing to do with the WAM4 or make little sense.
Sorry to moan but the first few dozen pages were of a good quality and then it starts to get harder to find anything usefull in here.
-
I have spent a few hours now reading through all the posts in this thread and am left with just a couple of questions, it would be great if some of you WAM4 users could help me find the answers.
1) Does anyone know what the FPS output is with a full carbine length (360ish mm i think) inner barrel on Abbey Ultra gas?
2) What could I expect the life of the stock internals to be on Ultra Gas?
3) If the bolt stop and hop are the first parts to go, what is the best aftermarket hop replacement? and is the G&P replacement bolt stop up to the job?
Oh and if anyone knows of the cheapest place to buy one of these in the UK that would be great to know too : )
P.S. Thank you to all who have contributed to an informative thread with good quality (in the main ) posting.
WE Gas Blow Back M4A1 Carbine
in Rifles (Gas)
Posted
Has anyone tried fitting either of these handguard accessorys to their WEs yet?
http://www.rsov.com/index.php?target=produ...product_id=2737
http://shop.ehobbyasia.com/accessories/gri...dark-earth.html
I am keen to get a tan handguard but have not yet decided if I want RIS/RAS or the lighterweight magpul, compatability may help with the decision making!