T0p Sp!N
-
Content Count
292 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by T0p Sp!N
-
-
Anybody know where to get a high-flow valve or just a replacement valve?
Mine is completely fubared now (one o-ring was ripped during disassembly and the valve striker shroud is so gnarled that the striker will no longer move smoothly and fully into position).
If not, I guess I'll just buy a GHK mag to solve other problems aswell.
-
Not sure if this was posted yet:
$23.39+$15 (5-7 days) to the US (East Coast)
They're about .17kg lighter than the original mags and I'm guessing these might come with the 063 model.
-
... The mag straight up shoots all the gas out from the top. I was moving the gun around with the mag in, and suddenly, inexplicably, the gun just went off full auto and emptied all the gas. Whenever I try to fill it with gas, all of it just shoots out, whether the valve lock is depressed or not. Took it apart to replace the o-ring listed on Redwolf as a possible leaky ring, but to no avail. Now when I reassembled it the valve lock doesn't move up and down smoothly anymore, it gets stuck.
I got mine yesterday and have the same leak/problem.
When the mag is inserted, the gun fires full auto (weak/short stroked).
I haven't stripped the mag down yet though, so I'll have to try that and check out the O-rings.
-
-
Nice. Planning on weathering it, perhaps?
:thumbs-up:
-
You swine. thats a hours wage
I wish i could be so lucky
Heh heh heh...
I think the main reason no one else jumped on that deal was because the seller (on another board TSNBN) had 2 posts!
So, I took a chance. It was through Paypal, too though.
Now, to save up for some metal body parts.
:thumbs-up:
-
Nice SSA. How much did you get it for then?
$26 shipped...!
The one issue though is that it doesn't cycle all the time, but I like a technical challenge.
If anything, it'll be a wallhanger.
:thumbs-up:
-
Haven't posted pics of my WE before *suicase pics though*:
New and Old.
:thumbs-up:
-
They can still be found used some places. I have an extra set of shells for a Cassi M500 that I'm looking to sell on right now.
_______________________
T0p Sp!N - That Marushin 9.5in Super Redhawk is brilliant. If you ever decide to pass it one drop me a PM. I'd love to have a chance to pick something like that up.
Sure, I'll keep you in mind.
And my new acquisition:
New and Old.
WE1911 and Tanaka SAA (old US/Export version I believe)
You wouldn't believe how much I got the Tanaka for...
:thumbs-up:
-
They won't fit, the gas cylinder is in the grip. The real steel has a pretty unique grip fitment, instead of a frame withe the spring in the middle it has a long stud down the centre and the grip slides over this and bolts upwards.
Yeah, I figured it'd take alot of modification.
I was planning on boring out some oversized wood grips to fit the gas reservoir and drill holes on the sides to fit the stock Marushin grip's brass washers and screws.
But I guess I'll just hold this small project off for now, though and save up for the rail instead.
:thumbs-up:
-
That is one sexy gun!
Thanks!
I'm planning on getting a weaver rail for it eventually and slapping a reddot on it.
Also, I might try and fit some real steel grips on it one day (as they're not a direct fit).
:thumbs-up:
-
Hi there. Sometimes i try to combine my two hobbies, airsoft and music...well this is what I get.
http://i634.photobucket.com/albums/uu61/Op...-Jazzmaster.jpg
Sorry if it was a bad joke, It's 2.36 AM I have to wake up soon for a game and I can't sleep.
Have a good nite.
Dual weilding P90s I see...
-
Hey, what's the brand of that revolver, Top Sp!n?marushin.
very nice looking piece too. if only a taiwanese company would clone them in 6mm and metal.
Yep, a Marushin 9.5in Super Redhawk.
Also, it comes with the scope mounts, but not the scope.
You can get a weaver rail for about $40 or 1" or 30mm rings for ~$25.
:thumbs-up:
-
*suitcase pics*
Scopes: Just because.
-
Mmm... Nagant...
How much did the whole outfit set you back?
:thumbs-up:
-
I need money. I need job. Gah.
Yeah, I feel ya'...
I might wait for wolf or poweredge to stock this first, though.
-
What do you guys use to remove the little black clip that holds the bolt carrier to the bolt ?
I removed it with a pin but you have to put to much pressure on one side and I fear that doing this a couple of times over will break it for sure!!
Special kind of pliers ? homemade tool ?
the trick should be to apply equal pressure to both sides at the same time
http://i170.photobucket.com/albums/u265/londerzeel/bolt2.jpg
If you want the right tool, you need one of these:
Circlip Pliers
Edit: Also, amateurstuntman suggests that you can do this with two screwdrivers.
-
How's the cooldown (if there is any)?
What kind of FPS are you getting and are you running it on green?
Also, any chance of a video?
Excellent review, great pics.
:thumbs-up:
-
Nice.
If you don't mind me askin, how much did it cost you?
-T.S.
-
Now something quite unrelated:
Not exactly suitable, that... -MDK
-
Also, I think its "they're".
:thumbs-up:
-
-
Amps... too loud...
Must... protect... head...!
-
Not be my its not.
I'm still relearning on my old encore POS strat.
The fender is my dads which I payed for for him as he didnt have the cash for it but there was no was I was going to let him miss out on that bargin. I just wish he'd hurry up and pay me back
Nice price, nice strat.
What amps do you use?
:thumbs-up:
AGM M4 GBB
in Rifles (Gas)
Posted · Edited by T0p Sp!N
I just finished the spring mod, but it didn't work. I can definitely feel a difference even when engaging the bolt catch manually, though.
I guess I'll have to try and sand the bolt catch tomorrow as was suggested then.