The Chewie HK416 Top Tech Pro Custom - "The Most Flexible AEG in the World!"

[proairsoftsupplies]

The most flexible AEG in the world

 

HK416 Top Tech Pro Custom

 

Can be anything from a DMR to CQB (and everything in between)

 

Key Features:

 

As some of you may be aware (and for those of you who are not), Chewie, our in house engineer here at Pro Airsoft Supplies is, to say the least, gifted. To this end, Chewie is going to be releasing a line of custom guns, and the first introduction to the line is this fantastic AEG. The claim “The most flexible AEG in the world” is rather bold, but we are confident we can live up to it – consider the following:

 

Four velocity levels (from CQB to DMR and everything in between!) The velocity can be changed without dissembling the gun. Use the VVD (Variable Velocity Device) tool through the barrel to change velocities in seconds.

 

3 round burst (or any round burst between 2 and 7) 3 round bursts are available via the “Pro Burst” “plug and play” Mosfet – plug this between your battery and gun (they use Tamiya connectors but can, on request, be fitted free of charge with Deans connectors) and adjust the dial with a small screwdriver.

 

Can disable full auto function - also using the “Pro-Burst” “plug and play” Mosfet.

 

“Pro-Burst” “plug and play” Mosfet also helps reduce trigger arcing.

 

Lipo ready: This gun is guaranteed for any Lipo up to an 11.1 (the guarantee does not include 11.1 lipos, however if used correctly, the gun will run on these).

 

Low “lipo” warning. Your AEG will shudder, warning that your lipo is running low. This is an alternative to giving off an alarm sound that gives your position away!

 

Low lipo cut off. If you have ignored the lipo alarm, the mosfet will shut down the AEG before irreparable damage is done to the lipo battery.

 

Full metal body. with individual serial number.

 

Precision 6.04 inner barrel for 363 mm long outer barrel.

 

2^nd shorter 6.04. G&G silver plated, precision, inner barrel included for CQB format. This extra inner barrel comes with an additional precision G&G Hop unit.

 

The last section of the long outer barrel can be unscrewed and reduced in size. Just drop in the CQB inner barrel and you have the CQB model!

 

All parts are G&G Top Tech parts (other than the Variable Velocity piston. CNC aluminium head, steel teeth)

The Top Tech parts are machined aluminium parts as opposed to caste, for greater precision and reduction in weight.

 

High torque motor.

 

Patented pneumatic blowback system which adds no stress to the other internals.

 

Functioning lockable bolt system, allowing easy hop adjustment.

 

Super high spec reinforced gearbox with 8 mm bearings.

 

Bearing spring guide.

 

All wiring is 16AWG silver platted copper for dramatically increased current delivery.

 

Full length precision metal RIS rails.

 

H&K style iron sites

 

Functioning forward assist. When you have finished using your “Pro Custom”, press the forward assist and it will relax the spring so that the gun is not stored whilst the spring is under tension. (Can prevent loss of FPS whilst being stored).

 

Comes with high quality (won’t miss-feed) G&G Hi Cap (450 rounds) or mid/low cap (79 rounds)

 

Available in black or tan.

 

All custom engineering carried out in The UK by “Chewie”, The Chief Engineer at P.A.S.

 

The workmanship and internals are fully guaranteed for 2 years.( In the unlikely event of any issues with this custom AEG, we guarantee that “Chewie” will carry out any work required. If you manage to think of any further “upgrades” that you would like, “Chewie” will personally carry out all work on these custom AEG’s )

 

Limited edition, only 10 pcs being produced. ( we will not be producing more)

 

£379:00

 

(The retail price of all of these items added together , excluding labour, is well over £430:00. If we were asked to create this bespoke, including labour, we would be charging circa £500:00)