Far-T
-
Content Count
48 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by Far-T
-
-
Alright guys,
My G39 has decided to stop working right. Stripped it down and part #91 in the trigger mech has snapped. The same thing has happened to my mates aswell.
This is the part:
http://i305.photobucket.com/albums/nn212/ChrisBenham45/IMAG0119.jpg
I've looked on a few websites but cannot find this part anywhere! Can anyone help?
Cheers
-
Alright guys,
I got myself a Npas set for this from RA-Tech and Im trying to get it fitted right. I've modified the nozzle spring as shown on their website and I've also modified the nozzle like the PDW nozzle link they have. No matter what I adjust the Npas too it still fires around 380fps. My limit is 360fps max!
Do I need to modify my nozzle like in the M14 link or what? Would be so much easier if they had a link for a G39c nozzle...
Cheers
-
WOW! That's all I can say about this gun. It's fantastic! Got myself one today with 6 extra mags. My walet was a hell of a lot lighter after
I did try and use a NineBall hop rubber but it didnt like that so switched back to the original one but used a smaller hop nub as before it made .2's so sky high!
-
Afternoon all,
Been a while since I've posted here! I've finally got my MP7 mags to feed properly. Was a mix of the brand of BB's I was using and the mag flowers. Anyway one problem sorted then another springs up! It stops feeding BB's consistantly so switched the hop rubber out for a brand new one. It starts feeding every shot now but the hop itself is very inconsistant. I've put a good few rounds through it incase the rubber needed some bedding in, nothing's changed. Had it all apart again, cleaned everything and double checked everything is back together right and still very inconsistant...
The power seems to changed from shot to shot so I'm thinking that is something to do with it. If I use single and fire once every few seconds the power seems fairly consistant but the hop not. Do a quick burst and again the hop is ###### but each BB's comes out slightly slower and doesnt fly as far.
I'm thinking the piston rubber isn't sealing well with my nozzle and thus causing the problems. Does that sound right? or could it be something else?
Do you think I should buy the Pro-Arms Enhanced Piston Head For KSC MP7A1 (Europe Version)? Oh I'm using a Ready Fighter nozzle aswell if that helps?
I've had this gun for ages now and all I've had is problems... When it worked for a couple of games it was a blast! I loved it and didn't want to use anything else but I'm getting to the stage of just giving up and selling it for parts or just chucking it in the bin...
Many thanks
-
But it was stock. The orginal nozzle blew so upgraded it. Then the screws broke in the bolt (the shop who fixed it must have over tighten them when replacing the nozzle) couldnt get hold of any replacement screws so got the new steel bolt instead. That then broke the gun more. The mags have been ###### since I got it. No matter what Ive done it just keeps going downhill
Mind you I do have bad luck, about 80% of my gun's have all broken on me in the last few weeks! Oh well i'll see how it goes tomorrow and if it break again i'll save for a new one.
-
Hi everyone.
Long story short I need a new selector lever. My hop rubber was giving me troubles and not letting any BB's past so had to replace it and all is good. Sadly when I got the gun the selector kept coming loose so I loctited the tiny grub screw but when I came to take it out the damn thing threaded! So I had to pritty much break it off the gun. I can still change from safe-semi-full but the selector can fall out one side of the gun. Not the biggest of trouble as I can just leave it on semi or full for the day but I need a new selector. Ive checked around the usual website but cant find one. Has anyone got a clue where I can find one?
Also on a side note, Ive been using the Bomber Steel bolt but have had to switch back to the orginal (by custom fitting new screws as the orginal hex ones broke their heads, why I brought the upgraded one) Those steel bolts are good but really have their down side! Ive crack the body by the top rear pin and even slightly broken the metal back plate!
I must have got a lemon or something but ive had nothing but trouble from this gun. Ive spent so many hours trying to get the mags to f****** feed!! Wet and dry'd the flowers plus wire wool to smooth everything which has helped ever so slightly. You guys got any tricks for the mags?
This cost me so much and is pritty much worthless now! Any help please guys!
Many thanks
-
Wicked! thanks very much mate
Far-T
-
Hey guys,
Ive been searching all over the internet and I cannot find any nozzle springs in stock. Does anyone know where I can get hold of some? The steel bolt is in stock most places so thats no problem but it's just the springs I need.
Anyone able to help?
Many thanks
-
Hi all,
Just got a second hand, but basically new KSC. The original nozzle blewup stright away for the previous owner so he had it upgraded with the ready fighter nozzle. Had maybe 2-3 mags tops through it yesturday and just testing it now the nozzle springs decided to mangle themselves. No real biggy as I can get them replaced but ALL 4 allen bolts in the bolt have shear!!! All of them!! some very poor quality from KSC me thinks...
Can anyone point me in the right direction for some more allen bolts? otherwise ive just spent £400 for a crappy paper weight!!
FYI the upgrades were done by a retailer and there was only one nozzle spring in there... not happy right now
Any help would be greatly appreciated
Far-T
-
Anyone else had any problems with BB's jamming and double loading when using the RaTech plastic nozzle and NPAS? switched back to my AGM nozzle with the NPAS installed on that and had no problems... couldnt put my finger on what was causing the issue.
Did a very handy little mod to my AGM tonight. I found that out of my 7 mags (all AGM) I was getting different amounts of kick from each mag. Placed a thin strip of plastic card on top of my mag catch just to hold the mags that 1mm or so higher and it makes all my mags seal far better with the nozzle! They all give the gun a very nice kick now. Just thought it was worth mentioning...
Far-T
-
My cat defends my airsoft kit from intruders!
-
This was a couple of years ago now and sadly nolonger have my old V8 Landy 110
Could carry anything and everything and then some more
+ all my friends used it as the bin during lunch...
KSC/KWA MP7
in Pistols (Gas)
Posted
Alright guys,
Havn't used my MP7 that much over the year or so I've had it. Think I got a bit of a lemon sadly as my mates KSC one is solid still! Anyway when I first got it the bolt broke its screws so got the upgraded steel bolt which has cracked the body
switched back to the original bolt with the front block & screws from the steel bolt. It's slowly but surely eaten the front of the bolt. It's shattered the front around the screw holes so now the small block doesn't stay in place thus making the gun useless 
Where can I get a replacement original bolt from? I can get new screws as spares but just need the actual bolt! Everytime I use this it breaks something. Think it might be easier to chuck it in the bin...
Any help would be great!
Cheers