[G36 Picture Thread]

This is my first G36 replica. I traded away my old M4 for it.

 

 

Its pretty much accurate to a real steel MG36, other than the KV stock.

[H&K Picture Thread]

So I got around to taking some pretty decent pictures of my airsoft collection. After I have been trying to sell off some of my guns. And these are my three H&K weapons that remain. My CAR-15 and M1911 can be seen in another thread in this section.

 

Here's all three. Ill have some more detailed ones further down.

 

 

Tokyo Marui PSG-1.

 

Fully upgraded with a Systema FTK. I plan on buying a tightbore and metal receiver sometime this winter. It shoots 488fps with a .2g bb right now. I'm hoping to be pushing 400 with a .28g bb after the tightbore is installed.

 

 

My new KWA Mp7A1.

 

Stock Extended

 

Trademarks on Pistol Grip

 

Lame Trademarks on the Side of the Gun and Fire Selector Markings.

 

And the little ID plate on the bottom of the gun. I'm not sure if these are unique?

 

And my KSC Mk23. Its currently broken, either waiting for a buyer or some replacement parts.

 

 

(Oh, and I know to take off the orange on the Mp7 you dont need to tell me)

 

And one last picture. My dog decided to step in my photo, and I took one anyway

 

[AR15 Picture Thread]

My CAR-15 again. Except a little better photo quality

 

[AGM M4 GBB]

I scored an AGM M4 with two RA Tech mags in a trade. It needs a new bolt catch which will be easy to get.

 

I was also thinking of getting one of the china clone burst trigger kits and a NPAS, and a new bolt carrier.

 

Are there any reccomendations on clone bolt carriers? I was looking at ebaybanned and there was a new element bolt carrier, has anyone had experince with this?

[AR15 Picture Thread]

Car-15... WANT. MORE. THAN. CAKE.

 

I used to have one 3 or so years ago, and i miss it like a dead relative... Gah. Maglite, i'm sure you won't, but don't put anything on that other than a para-cord sling... you lucky git

 

Oh I wont. Good thing I bought a 50 foot length of para-cord. But I do plan on making it as BAMF as possible. A G&P Metal Receiver, A Tightbore barrel, maybe a Systema drop in mechbox, and make it LiPo ready. The battery space in those handguards is tiny!

[AR15 Picture Thread]

That's possibly the most ghetto, yet beautifully awesome AR-15... EVER.

 

Ghetto?!?!? Its a Tokyo Marui CAR-15.

 

Well, the actual history of the weapon is pretty ghetto. A M16A1 with the barrel and stock cut exactly in half? Yeah, pretty ghetto.

[AR15 Picture Thread]

Lets go back in time, before RIS, EOTech's, Aimpoints and Magpul.

 

I bought this at a game here in Illinois yesterday. The previous owner says its 10-15 years old, and he put in a new mechbox for it.

 

 

And with the signature sliding stock.

 

 

Im gonna take some new pictures when I put it all back together.

[AGM M4 GBB]

I've been thinking getting one of these AGM rifles. I know for sure I would want to get the RA-Tech NPAS so I could actually skirmish the thing. I would also like to solve the double feeding problem, which the only way I could see taking it away is buying the complete RA-Tech barrel and hopup set. Is there any more price effective way of doing so? The complete set is kinda $120... I was also thinking of getting the complete RA-Tech NPAS with the plastic nozzle. Do these pose any problems being installed? And I also have in my list the reinforced bolt catch.

[IMI Weapon Thread]

I have had a horrible time trying to get this kit to fit to my original Mauri parts. I had to dremel down a lot of the original parts to fit into this kit. Its still not right, and it needs a little bit more filing.

[IMI Weapon Thread]

I have a few pictures a page back or so. But since then, I have bought the Guarder "Electroplated Silver" upgrade kit for my Desert Eagle. And I must say, it looks awesome!

 

Note, there is no loading nozzle in the gun, because I broke it trying to take the slide apart again :'(

 

 

The trademarks are just stunning on this gun. They are engraved deep and are highly visible.

 

And the best thing Guarder did with this is change the silly "Made in Japan" to the real "Made in Israel".

 

And still, I'm having some fitment issues with the slide and frame, that I've almost fixed. But I was planning on using this at Codename Thunder, but I guess I wont be due to my carelessness.

[WWII Weapons Picture Thread]

My "Broken" CYMA Thompson. I bought it off one of the "boneyards" for $50. Fixed within 30 minutes and it works perfectly.

 

 

Normally the fire selector trades would be just stamped, a little bit of white crayon makes it look a lot better

 

Right side trademarks, and I took a bit of sandpaper to the boring black bolt cover.

 

Old and new skool.

[IMI Weapon Thread]

Omg I see a USP in the background. We're long lost twins!

 

Proof:

Its not a USP, Its the USP's big sister.

Mk 23?

Yup.

I would tell you know I know but that would just reveal how much of a geek I am.

 

Yup, Evansy is 100% right. Here's another picture for ya. And to the "Big Sister" comment my friend keeps using the analogy "The Mk23 is the USP's hot mom."

 

[IMI Weapon Thread]

PDF of the TM manual with parts diagram

http://www.depot53support.com/pdf/DesertEagle%20TM.pdf

 

Perfect. Thanks a bunch.

 

EDIT: And it seems my 50AE-03 part has broken... Great.

[IMI Weapon Thread]

 

Bought one

 

But one big problem. I was plinking around with it, and the gun stopped cycling. I opened it up to see part of the gun broken off, ratting around. If anybody has a parts diagram, I would really appreciate it.

[H&K Picture Thread]

Needs even moar PSG-1.

 

 

And KSC Mk23

 

[DMRs]

Its more of a "Sniper Rifle" But it shoots in the DMR ranges

 

[1911 Picture Thread]

img]

TM MEU with the following Mods

Nova Kimber Warrior Frame & Slide

Airsoft Surgeon Blowback Unit, recoil spring & Enhanced Loading Nozzle

Nineball extended slide stop & safety

Tanio Koba Threaded outer barrel with one touch adapter

Rose Wood Grips (temporary fitment)

King Arms H&K Pro Silencer 120mm

6:01 Tightened inner barrel

 

How is that AS BBU working out for you? Im putting together a custom M1911-A1 based off the one used in Metal Gear Solid 3, and I want to get the best performance out of it that I can. I was looking at that Blow Back Unit, and was wondering if it is worth the $50USD?

[Silenced Guns Picture Thread]

I own 3 Suppressors for a reason

 

 

 

[M14 Picture Thread]

Kart M14 EBR

 

With Leapers 4x32 Scope

 

With G&P Replica Aimpoint

[Armalite Picture Thread]

My Hybrid CA/TM M4 CQB. TM Internals, CA Externals

 

 

Old Skool TM M16A1 Vietnam Version with a few.... Extras.