-
Content Count
371 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Calendar
Posts posted by Dickens
-
-
I currently have a WAS Ricas Compact, but thinking about buying the DCS. Can you (or anyone else) tell me if there are any notable differences between these two?
I read it's smaller than a Ricas, but I expect to fit most sizes? My chest size is about 44 inches.
My Ricas Compact is currently heavily loaded, but would like to change to a low profile kit and preferably without pouches on my sides. Would you recommend to use it with a belt kit?
And about the color. The Ricas Compact is WAS Professional Tan and the DCS is WAS Elite Ops Coyote Tan.
Is the Coyote Tan darker? More to the brown side?
Thanks
Cant compare them because i never had the RICAS, but what i can tell you is that my chest is bigger than 44 inches and the DCS fits fine. And at a wild guess i would have to say the DCS would be smaller than the RICAS (but only marginally).
-
Took some inspiration from this page and also the PX4's that come in two tone, thought it looked pretty good so i tried it myself with the results below.
-
I like it. I love WAS MC rigs and gear. Always fancied a DCS.
Does the SERPA not interfere with the rear mags?
Cheers TBH no, its a bug's nadge away from interfering with the mag release. I think the photo makes it looks like it does, but it just clears it.
Im never buying anything else but WAS gear now, excellent quality, fair prices and comfortable, what more could you ask for......
-
Not posted in ages but here goes
WAS DCS
2 x WAS triple 5.56 mag pouch's
2 x WAS Utility pouch's
WAS single 5.56 mag pouch
WAS Hydration Carrier + Hydro Pack tube cover in multicam flavour
PX4 BlackHawk Serpa holster
Think that's it.....
Cheers
-
Couple of photos of my G&P Magpul Sentry with its new DD 12" rail system.
- 2
-
This is my latest incarnation of my Sentry. Started life as a standard G&P Magpul Sentry. It is now fitted with:
Multicam MOE PTS stock
Multicam MOE PTS grip
DYTAC Multicam rail covers
Magpul MOE XTM covers
ACM MS2 sling
ASAP plate
ACM 552
G&P 14.5" outer barrel
6.03x363 tight bore inner
PTS PMAGS
Quick question though, need some help. Im wanting to fit a Noveske free float RIS unit, this one http://www.madbullairsoft.com/English/index.php?main_page=product_info&cPath=22_24&products_id=192 only problem is ive heard G&P upper receivers can have compatibility issues, does any one know whether or not i would have problems fitting this unit?? Cheers : )
-
Looks nice dude - Out of curiosity, how have you kept the VLTOR flashhider from rusting? I'm not too bothered by it, it's just a minor annoyance. Using Lipo's or NimH's? (On the subject of which, just to echo what's been said, these things are designed primarily for 7.4 lipo's).
To be honest i just wipe the thing down every time i get home from a game and that has kept the rust at bay (must be lucky lol) As for batt's i use HimH's more specifically these bad boys
http://shop.ehobbyasia.com/gandp-9-6v-1600mah-ni-mh-battery-twin-t-shape.html
The only thing that annoys me about the sentry (and this is more my fault in the fact that i still haven't started using lipo's) is the battery change's, bit of a pain tbh.
Cheers
-
Had mine a year now and it still perform's. Ive recently installed a 14.5" G&P outer barrel with 363mm tightbore and new G&P hop rubber. Ive owned approx 8-10 AEG's and this is the best by far for an all round performer.
Updated picture.
-
very nice what light are you using on the rail? carnt wait till i get my px4
As said above it's a bog standard G&P M3 nothing special lol
-
I love mine, quality little pistol from TM yet again : )
-
My new Tokyo Marui PX4
-
Me at my local game on 28/11/10
-
I used electrical tape on the lower receiver, just above where the back of the gearbox rests in the receiver, and it removed any wiggle that was in my Sentry.
Thanks jables, i shall try that over the weekend
-
My Sentry has a TINY space on the back side where upper and lower meet, yes. If the metal below had that line in black it would go unnoticed.
Thanks wingmann, at least im not the only one
Does any one have a fix for this? Im not after closing the gap up (not to bothered about that tbh) i just want to take the wobble out of it?? Any suggestions?
Cheers
-
My Magpul Sentry came today and im mighty impressed. But there is one thing thats bugging me......
Does any one else have an issue with the gap between the Vltor upper and the Magpul lower? Mine ssems to have a bit of a gap (not massive) but enough that when i put pressure on the upper it 'clicks' down into the lower, and when i press down again on the front end it move's back out again? Does any one else have this problem. Like i said, the play in it isnt much (were talking less than half a mm), am i just looking for a little niggle thats just normal? Will it effect the weapon in any way?
Any help would be cool
Cheers
-
Thanks for the info guy's Think im gonna order the 13.5" one from ehobbyasia, prefer the look of the longer barrel.
Cheers
-
Thinking about getting one of these bad boys next month, just a quick question though.
Can any one confirm that the vltor lower receiver takes Magpul PTS PMAG's and feeds them with no problems? I currently run the PMAG's and i dont want to change to another mag.
Cheers
-
Magpul will always win go with the MBUS Is that a real steal Aimpoint T1 or an ACM one? Im after one for my 416??
-
That’s pretty extreme just fit in PMAG's aint it, i love Magpul stuff but f**k me that’s over the top dedication right there lol
-
Triple Tap Brake... i have no idea what it does or how it does it in the real steel world, but it looks cool.
Do you mean the gas block? Im getting confused? lol
-
Very very nice mr foxhound, i like it a lot. Its exactly how i would have an M4, great taste
-
looks like the Italian stuff
Correct, Italian vegetato woodland. Its my team camo as well
-
That Eo tech looks gold???
-
Wow. Magpulled 416's look amazing.
Whats withe the hole in the magwell? So PMAGS fit?
Hopefully the PTS EMAGs will work better in 416's. Mine are very tight in my M4, but Ive gotten used to it.
Thanks The hole in the magwell is normal aint it? I hope so haha its a JG metal body if that makes any difference. And yeah the PMAGS fit, they are a little tight but they do fit and feed with no problems.
Dickens
Driver Error in the gas pistol reviews WE M&P
in Site errors
Posted
As title says i keep getting a driver error in the WE M&P gas pistol reviews thread, link below.
http://www.arniesairsoft.co.uk/forums/index.php?/topic/207012-we-mp/
Any one else having the same problem? Be really nice to access it as ive just ordered an WE M&P lol
Cheers