mike735
-
Content Count
10 -
Joined
-
Last visited
-
Ordered one from Eagle6, with some other spares.
-
- Original Part Number - M&P9-46 Tokyo Marui - M&P9 Hammer Unit (Knocker Lock) For M&P9 Gas BlowBack Pistol Series
-
New part breakage, not sure how hard it will be to find this one.
-
While inspecting my pistol I found the nozzle valve spring to be broken, I replaced it with TM G17 spring I had on hand and that has help return some of the performance. I could not find a exact replacement in stock so I ordered some for a TM 5.7 and M9, since the G17 is a little different. I will see what works best until I can get an exact replacement.
-
Thanks for the suggestion I definitely should replace the hammer spring I may look into replacing the sear and hammer with the WIi Tech offerings. The reviews on the UAC sear and hammer do not seem all that positive.
-
I have a question concerning UAC loading nozzle and BB housing, the FPS on my Mauri M&P has dropped off from 250fps average to 220/200fps. Will the upgraded UAC parts restore the FPS back to stock levels? The gun sees a lot of use for firearms practice and has probably in excess of 10000 BBs fired through it. Several stock parts have been replaced when they have failed. I use propane in the gun. The drop in FPS is the same with a well-used mag and a brand new magazine. I also tried a new stock piston head seal and a Nine Ball Dyna piston head with a larger o-ring, the Nine Ball pis
-
Squad 701 Thanks for the info I will look into sourcing one or fabbing something up.
-
I ordered the Nova 4.5 Performance Center Slide kit ( I want to practice using a red dot) for my TM M&P and have a problem. The BBU does not have slot/space for the nozzle return spring like the stock unit. I install it without the spring and it work somewhat if the piston was lubricated heavily. But then it started to fail to go into battery or would not load BBs from the magazine. I tried placing the spring on the right side of the BBU and this kind of worked but the spring became dislodge and the pistol stopped working. Am I missing something is there some way to install the spring
-
Initial Impressions of the TM SOPMOD M4 AEG
mike735 replied to Gunfighters808's topic in Rifles (AEG)
Been working out with my sopmod all morning I dry fired it about 400 to 500 times and fired about 100 bbs with no problem. I decided to look into the wobbly barrel assembly, one or two mm of movement left to right. Once I got the gun apart I noticed that it was just the barrel nut was loose, tightened this up made sure the RIS was snugged down and now the front end is rock solid. It is fair to note that it was loose out of the box but it was a simple fix. The castle on the stock which is not staked has worked loose a couple of times but this is no big deal, it happens on RS guns that aren’t st -
Initial Impressions of the TM SOPMOD M4 AEG
mike735 replied to Gunfighters808's topic in Rifles (AEG)
I purchased a TM sopmod for LEO training, I do not play airsoft so I can't comment on that aspect of it but so far I have been pleased with the gun. I have fired 3000 .20 bio bbs with no problems so far and have dry fired about the same amount doing various dry fire drills. The trigger could be alittle better as well as the selector switch but they are good enough to get some meaningfull feedback. The bolt stop and recoil function made the package for me as a training tool. The felt recoil could be harder but is still very noticeable and does somewhat give you the impression of a recoiling
