[WTS Magpul CTR with buttpad]

Located in Spain, Europe.
Payment: PP, bizum, bank transfer.
Shipping is paid by buyer. Only within the EU.

Real one with the extra thick buttpad. It was not used much. Real one, not fake.

[WTS Peltor Comtac XPI]

Located in Spain, Europe.
Payment: PP, bizum, bank transfer.
Shipping is paid by buyer. Only within the EU.

I purchased it in January 2023. It is not seeing much use so I decided to sell it.

You get everything you see on the pictures, EARMOR hard case too.
I am left handed so I modified one plastic hanger to move the mic further up so I could shoulder a zucc-is-best. There is a spare one included so it can be returned to factory condition. Mic is unmodified.
Second mic was only opened to perform a function test.

Everything works, no issues.

If you want to use it with a Baofeng or Puxing radio, we can talk about a modified Nexus PTT with an amplifier.
I have two PTTs, 1 amplifier. 
All work was done by a very reputable German gentleman. 

[WTS Templars gear PC, backpanels, pouches woodland and multicam tropic]

Located in Spain, Europe.
Payment: PP, bizum, bank transfer.
Shipping is paid by buyer. Only within the EU.

Templars Gear CPC ROC gen 3 plate carrier, two back panels, 1 molle front panel, Templars gear training plates, all factory bits are included even if they are not on the pictures - 380 EUR
I prefer to sell it together. It includes:
1x - CPC ROC gen 3 medium PC - 1,5 years old, no damage, US WL color
2x - Templars gear training plates, 2.5 Kgs each
1x - Molle front panel, 1st gen, US WL
1x Flat pack backpanel, US WL, comes with two custom made utility pouches
1x molle zipon backpanel with a small hydro pouch and a utility pouch (I can include a Source 1L bladder that I used only 2 times), all US WL

1x Templars Gear small vertical utility pouch, US WL - 15 EUR

4x Templars Gear SMG mag pouches, templars gear, multicam tropic - 40 EUR for the lot or 12 each

1x Templars Gear flashbang pouch, multicam tropic - 15 EUR

1x Direct Action small utility pouch, US WL (the really dark colored one) - 25 EUR

1x Direct Action Slick Carbine pouch, multicam - 15 EUR

[WTS TM NGRS MP5A5 with extras]

Located in Spain, Europe.
Payment: PP, bizum, bank transfer.
Shipping is paid by buyer. Only within the EU.

I purchased it in January, used it a few times and I have not taken it to a game since March. Works, no issues, it is the best AEG TM has ever made. But I prefer to use the MWS.

I have all original accessories, box, parts, etc. Only internal changes are a Nine ball hopup bucking and changed the connector to deans. Rest is stock.

1x TM NGRS MP5A5
6x TM midcap magazines
2x batteries

Accessories:
Magpul Mlok handguard (real one)
Magpul RVG (real one)
RGW mlok top rail
Vector Optics Maverick III (original box and accessories included), high mount
Madbull Gemtech Raptor II
M340V replica, strobe function, mlok hot button
Mag coupler

If you want to take everything that can be seen on the pictures, negotiation starts from 950 EUR.

If you only need the gun (in stock configuration), mags and batteries, it starts from 700 EUR.

Any questions, PM.

[WTS HAO 13,5 MK16 rail DDC]

Rail is sold, topic can be closed.

[Haley, Earmor, VictOptics]

Haley vest and earmor set is sold. 

High mount of the scope was sold separately, only available with the low mount for 110 EUR.

[Haley, Earmor, VictOptics]

Located in Spain, Europe.
PP, bizum, bank transfer.
Shipping is paid by buyer. WW.
 

Haley D3CRX multicam, with MP2 inserts and double magazine wedge. Used, no damage. Price: 160 EUR

Earmor M32 Mod3 foliage green, with silicone foam pads, Earmor ARC rail adapters and FMA Unity replica ARC rail adapters. If you want to use it as a standalone headset, you need to get a cover for the headband and you are good to go. It was not used much, no damage or problem. Works suprisingly well for its price. Price: 75 EUR.

VictOptics S6 1-6x24 SFP, with mount and rings, used just one time and then the big rifle got sold, small rifle needs no such scope so here it is. No issue or damage. 160 EUR

 

[WTS HAO 13,5 MK16 rail DDC]

Located in Spain, Europe.

PP, bizum, bank transfer.

Shipping is paid by buyer. WW.

Price: 100 EUR

Used but no damage. Comes with an AEG barrel nut.

[AR15 Variants and Derivitives Picture Thread]

I wonder who the OEM is. It looks similar to the Holy Warrior one.

[AR15 Variants and Derivitives Picture Thread]

Edit: found it.

[H&K Picture Thread]

Does the bad lever work properly with the gun?

 

Looks nice!

[Surefire XC1 comparison to ACM clone]

Tagged for updates. Great review, thanks!

[Initial Impressions of the TM SCAR-L Recoil Shock AEG System]

My custom barrel extensions are done. Made of steel and blued.

 

 

 

 

 

[Initial Impressions of the TM SOPMOD M4 AEG]

...but with GBBRs actually being more accurate/consistent/superior range out of the box, Marui magic is slowly fading...

 

[Initial Impressions of the TM SOPMOD M4 AEG]

Tokyo Marui Recoil Shock Next Generation EBB Owners Group - Does this group has got any no non-UK members or such rule in their description?

[Initial Impressions of the TM SCAR-L Recoil Shock AEG System]

I recently got a TM SCAR-H. After Vipertechs and GBBRs I expected a really toyish feeling but it was much better than expected. It has some downsides (that charging handle which is cheap plastic for example) but in general I am satisfied.

 

I noticed that the AAC 18T MITER flash hider of Marui is incorrect. As most of you might know, MITER flash hiders cover almost 2" of barrel behind the threaded part of the barrel. But Marui did not replicate that, therefore if one wants to use a different flash hider (like a PTS one which works with the SCAR-H suppressor, Marui FH does not) the gun can not be used in 13" configuration.

I contacted a local guy here to have some custom barrel extensions made in the correct length. Is anyone interested?

[Cybergun/VFC FNX-45]

NonEx, do you plan to make a review about it?

[FN Picture Thread]

A QD sling swivel would make a great addition to those low pro panels. Nice work!

[Tokyo Marui Glock 17 3rd Generation Gas Blowback Pistol]

My TM G17 with the following parts:

Guarder 2013 ver. OD frame - good product, installation was mod free and could took even CO2 use. However, the thread of the screw that secures the hammer housing stripped at the first installation. But the screw stays in place ever since then.

Guarder polymer/plastic magazine catch - I bought a standard one as a replacement however it seems to be an extedened one nevertheless. Does what a mag catch needs to do. It took almost 3 years for the stock one to wear out, I am curious about how the Guarder one will perform.

Guarder 150% hammer spring - So far so good.

Action 8mm hammer ball bearing - It has been in use for 3 years, no problem with it.

Guns Modify extended slide catch - had to bend it a bit to make it work perfectly.

Guns Modify extended take down lever - works, nothing much to say about it.

Guns Modify SAI adjustable trigger (ver 3) - I had to buy a new set of hex screws for installing it, works fine.
Guns Modify serial plate

Shooters Association 200% trigger spring - Not easy to install, but works fine so far.

Rest is stock.

 

PGC/Pro-win aluminium slide and outer barrel - there was some sanding included to make it slide as smooth as possible but works fine ever since then. My only problem is the paint coming off.

Guarder night sights - Temporary replacement untill I get to hunt down a GM one with real tritium inserts. I also tried to 5KU one but that one does not even fit without filing.

Guns Modify nozzle - first batch broke on the 3rd shot, GM replaced it for free with 2 nozzles and I have been using those ever since.

Nozzle internals - Guns Modify, too.

PDI piston head (winter type) - Made the gun ridiculously gas efficient.

Nozzle return spring - I think it is SA 200% one, I tried many different brands when I tried to convert the gun to CO2 use.

AIP hopup - Sadly the stock one broke so I had to get a new one. I was really afraid of this item but to my surprise, it is a really good product. Drop-in installation.

Stark Arms hop arm - stock one was bent and I could not fix it. This one works much better.

Maple Leaf hop adjuster wheel - allos a wider range of hopup adjustment

Shooter's Design recoil rod - the multi piece one. During the CO2 project I tried I think almost all kinds of recoil springs I could: Guarder, Stark Arms, APS, Shooters Association, etc. Currently running a Stark one, not that great so I plan to replace it with a Shooter's Design one. I hear their springs are the best.

 

Feel free to ask.

 

[Glock Picture Thread]

TM Glock 17 with steadily decreasing TM parts.

[Glock Picture Thread]

Nice one, but you need to replace the frame.

 

Where did you get the Magpul speed plate?

[AR15 Variants and Derivitives Picture Thread]

Pink XTM - Yeah, no purpose at all. It is (more like was) a girl's gun. I think that explains what needs to be.

 

Extended mag release - that is actually the real OdinWorks one that Crusader copied a year later its release. For a small girl with small hands it made weapon manipulation easier. But if you have no problems reaching the mag release button then there is no point in getting one.

[AR15 Variants and Derivitives Picture Thread]

My girlfriend's Vipertech in its almost final configuration.

(posting pictures on this board is something that can be considered as PITA)

 

 

 

[AR15 Variants and Derivitives Picture Thread]

Nice builds Kagami, but not enough pictures.

[The HK 416 GBBR by VFC]

What's your opinion about the gun anyway? I see that the mag and bolt catch are made of steel which is promising.