Bacta
Members-
Content Count
17 -
Joined
-
Last visited
About Bacta
-
Rank
Member
Additional Information
-
Country
Nothing Selected
Profile Information
-
Gender
Male
-
Just noticed that the stocktube is a tiny bit wobbly, even with the stocktube ring sitting rocksolid. Didn't do anything. Not good I guess? :/
-
Alright, thanks guys. Will open it on weekend and report what's wrong.
-
No, it's the same hard trigger pull in full-auto position, it's not firing.. I wonder what caused this exactly..
-
Have a lockup. When the Magazine was empty, the bolt lock engaged normally. I pressed the bolt-catch with the magazine still inserted, it did what it should and went outwards again. I fired again with the mag still in (but no bb in it since I fired all of them) and the whole gun locked up. The trigger is hard to pull, If you pull it to a certain point it makes a click sound and is easier to pull, but it doesn't fire. What could this be?
-
Can't I just dremel through the inner to reach the screw? Just kidding Thanks!
-
Oh so I have to remove the inner first?
-
I'm not able to remove that screw under the frontsight for the life of me..tried 1,5mm (too thin) and 2mm (too thick). Is it normal that you can see the barrel through that hole? I removed the 2 Pins already.
-
So you're using a 7.4 or stock 8.4v? Thanks for your feedback!
-
So again a noob question, is a 100 Spring still going to assort well with the stock hop-up assembly/rubber? And I'm worried that the trigger response won't be that snappy anymore, even with a 7.4V Lipo?
-
Thing is that I ditched the Vltor stock in favor to a normal non-TM Cranestock, so I can't use the metal bars.
-
I think I'm going to solder the extension directly to the Marui wire, if no objection is raised..
-
Thanks bud, I've got one more: I received my new CQB-R a couple of weeks ago and want to resolder it to deans, by using an extension cable. Now, what would be best method to connect the wiring of the Marui to the extension cable? Normal crimps? What AWG should the extension cable have? Does the Marui have 16awg wiring? Oh and I'm wondering if I should leave a fuse out or not if using a 7.4v 1200mAh 25-50c Lipo. Thank you so much
-
Hi all, what's the recommended BB weight for a stock Next Gen? 0,20 or 0,23? Thanks